FM Filters and Combiners by Alexander ter Kuile

FM Filters and Combiners - Catalogue 13

Via Senatore Simonetta, 26 20867 Caponago (MB) - Italy tel.: +39 02.95.96.11 fax +39 02.95.96.13.11 e-mail: info@sira.mi.it www.sira.mi.it

history SIRA SIRA is a privately owned company, founded in 1977 by a group of technicians active in the telecommunication field and specialized in RF technology. Sira has 11,000 sq.meters of manufacturing and support facility based in Caponago (MI) Italy. SIRA is a customer oriented company, which has adopted the philosophy of working together with its customers to meet the critical technical requirements for their systems with an attitude of enthusiasm and concern in order to provide the best results in the final products. This approach has given Sira a position of leadership in its field. Sira products are designed and manufactured in accordance with the particular international standards in force in the area. As a major position of its cross revenues, Sira has been investing in research and development, quality and reliability control and products safety in the RF field. This policy of investments has provided Sira with an extremely high level of experience in its field: there are Sira installations in more than 80 countries in the world.

Specifications are subject to change without prior notice

quality

SIRA’s aim is to give to all its customers reliable products and services with the highest quality standards, this ambitious goal is achieved mainly by means of an integrated management system (Quality-Safety-environment) and is certified according to the norms UNI EN ISO 9001 (2000) and UNI EN 14001 (1996). The enhancement of company efficiency through the continuous improvement of the operative quality of the internal functions (effectiveness), the reduction of defects on sold products and the notable attention to the quality culture at all company levels have become SIRA’s fundamental cares. Moreover SIRA is committed in a thorough policy of environmental protection: a training and information process on all personnel is continuously carried out in order to grant a responsible management of all the activities in a special respect of the environment. For instance, the development and the implementation of new technologies, products and production processes is carried out with a thorough control for a rational use of energetic sources and of raw materials, minimizing the production of waste and the use of non-renewable resources, everything with the aim of keeping environmental impact on air and water as lowest as it is possible. For all SIRA’s activities it is fundamental to oppose the conditions of life and work which are against the health of the workers, as well as promoting freedom principles and self-respect for any human being. An extract from SIRA’s ethic code states that “Sira refuses any discrimination based on sex, race, languages, personal and social conditions, religion and political choices” and to this aim Sira promotes a working environment that, inspired to the principles of respect, fairness and collaboration, is meant to support the involvement of all Employees and Contributors giving the common sense of responsibility in reaching all the Company goals.

Specifications are subject to change without prior notice

index

FM Filters

FM Combiners

Coaxial Components

Specifications are subject to change without prior notice

FM FILTERS

FM Filters

CFM2-0.2

CFM3-5

CFM3-0.2

CFM4-5

CFM2-0.6

CFM2-10

CFM3-0.6

CFM3-10

CFM4-0.6

CFM4-10

CFM2-1.2

CFM4ELL-10

CFM3-1.2

CFM2-20

CFM4-1.2

CFM3-20

CFM2-2

CFM4-20

CFM3-2

CFM4-2

CFM2-3

CFM3-3

CFM4-3

CFM2-5

CFM2-0.2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.2 kW bandpass filter 2 pole / 85 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER INSERTION LOSS CONNECTORS OPERATING TEMPERATURE RANGE OVER TEMPERATURE* MATERIALS EXTERNAL FINISHING WEIGHT

CFM2-0.2/AA 87.5 ÷ 108 MHz 50 ohm ≥26 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 0.2 kW (selectivity ± 1.6 ÷ ± 2.0 MHz) See table below NF -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, teflon Painted Ral 9005 5 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.68 0.69 0.70 ± 1.6 0.81 0.82 0.83

Specifications are subject to change without prior notice

CFM3-0.2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.2 kW bandpass filter 3 pole / 85 mm adjustable selectivity

CFM3-0.2/AA 87.5 ÷ 108 MHz 50 ohm ≥26 dB at carrier f0 ± 0.8 ÷ ± 1.4 MHz 0.2 kW (selectivity ± 0.8 ÷ ± 1.4 MHz) See table below NF -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, teflon Painted Ral 9005 7 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.4 0.91 0.93 0.95 ± 1.2 1.04 1.06 1.08 ± 0.8 1.44 1.47 1.50

Specifications are subject to change without prior notice

CFM2-0.6

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.6 kW bandpass filter 2 pole / 150 mm adjustable selectivity

CFM2-0.6/AA

CFM2-0.6/BB CFM2-0.6/CC 87.5 ÷ 108 MHz 50 ohm ≥26 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 0.6 kW (selectivity ± 1.6 ÷ ± 2.0 MHz) See table below NF 7/16 F 7/8” Unfl.F -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, teflon Painted Ral 9005 12 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.44 0.46 0.48 ± 1.6 0.52 0.55 0.58

Specifications are subject to change without prior notice

CFM3-0.6

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.6 kW bandpass filter 3 pole / 150 mm adjustable selectivity

CFM3-0.6/AA

CFM3-0.6/BB CFM3-0.6/CC 87.5 ÷ 108 MHz 50 ohm ≥26 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 0.6 kW (selectivity ± 0.8 ÷ ± 1.6 MHz) See table below NF 7/16 F 7/8” Unfl.F -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, teflon Painted Ral 9005 18 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.6 0.52 0.54 0.56 ± 1.2 0.68 0.70 0.72 ± 0.8 0.96 0.98 1.00

Specifications are subject to change without prior notice

CFM4-0.6

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 0.6 kW bandpass filter 4 pole / 150 mm adjustable selectivity

CFM4-0.6/AA

CFM4-0.6/BB CFM4-0.6/CC 87.5 ÷ 108 MHz 50 ohm ≥26 dB at carrier f0 ± 0.6 ÷ ± 1.2 MHz 0.6 kW (selectivity ± 0.6 ÷ ± 1.2 MHz) See table below NF 7/16 F 7/8” Unfl.F -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, teflon Painted Ral 9005 24 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.2 0.82 0.85 0.88 ± 1.0 0.90 0.94 0.98 ± 0.8 1.08 1.13 1.18 ± 0.6 1.38 1.44 1.50

Specifications are subject to change without prior notice

CFM2-1.2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 1.2 kW bandpass filter 2 pole / 150 mm adjustable selectivity

CFM2-1.2/BB CFM2-1.2/CC 87.5 ÷ 108 MHz 50 ohm ≥28 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 1.2 kW (selectivity ± 1.6 ÷ ± 2.0 MHz) See table below 7/16 F 7/8” Unfl.F -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, teflon Painted Ral 9005 11.5 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.34 0.37 0.40 ± 1.6 0.42 0.45 0.48

Specifications are subject to change without prior notice

CFM3-1.2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 1.2 kW bandpass filter 3 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM3-1.2/BB CFM3-1.2/CC 87.5 ÷ 108 MHz 50 ohm ≥28 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 1.2 kW (selectivity ± 1.2 ÷ ± 1.6 MHz) 0.8 kW (selectivity ± 0.8 MHz) INSERTION LOSS See table below CONNECTORS 7/16 F 7/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 16 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.6 0.43 0.44 0.45 ± 1.2 0.54 0.56 0.58 ± 0.8 0.74 0.78 0.82

Specifications are subject to change without prior notice

CFM4-1.2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 1.2 kW bandpass filter 4 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM4-1.2/BB CFM4-1.2/CC 87.5 ÷ 108 MHz 50 ohm ≥28 dB at carrier f0 ± 0.6 ÷ ± 1.2 MHz 1.2 kW (selectivity ± 1.2 MHz) 1.0 kW (selectivity ± 1.0 MHz) 0.8 kW (selectivity ± 0.8 MHz) 0.6 kW (selectivity ± 0.6 MHz) INSERTION LOSS See table below CONNECTORS 7/16 F 7/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 21 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.2 0.59 0.62 0.65 ± 1.0 0.67 0.71 0.75 ± 0.8 0.81 0.85 0.89 ± 0.6 1.04 1.08 1.12

Specifications are subject to change without prior notice

CFM2-2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 2 kW bandpass filter 2 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM2-2/BB CFM2-2/CC 87.5 ÷ 108 MHz 50 ohm ≥28 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 2.0 kW (selectivity ± 2.0 MHz) 1.5 kW (selectivity ± 1.6 MHz) INSERTION LOSS See table below CONNECTORS 7/16 F 7/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 15 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.34 0.37 0.40 ± 1.6 0.42 0.45 0.48

Specifications are subject to change without prior notice

CFM3-2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 2 kW bandpass filter 3 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM3-2/BB CFM3-2/CC 87.5 ÷ 108 MHz 50 ohm ≥28 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 2.0 kW (selectivity ± 1.6 MHz) 1.5 kW (selectivity ± 1.2 MHz) 1.2 kW (selectivity ± 0.8 MHz) INSERTION LOSS See table below CONNECTORS 7/16 F 7/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 18 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.6 0.43 0.44 0.45 ± 1.2 0.54 0.56 0.58 ± 0.8 0.74 0.78 0.82

Specifications are subject to change without prior notice

CFM4-2

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 2 kW bandpass filter 4 pole / 150 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM4-2/BB CFM4-2/CC 87.5 ÷ 108 MHz 50 ohm ≥28 dB at carrier f0 ± 0.6 ÷ ± 1.2 MHz 2.0 kW (selectivity ± 1.2 MHz) 1.7 kW (selectivity ± 1.0 MHz) 1.5 kW (selectivity ± 0.8 MHz) 1.2 kW (selectivity ± 0.6 MHz) INSERTION LOSS See table below CONNECTORS 7/16 F 7/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 25 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 0.59 0.62 0.65 SELECTIVITY (MHz) ± 1.2 ± 1.0 0.67 0.71 0.75 ± 0.8 0.81 0.85 0.89 1.04 1.08 1.12 ± 0.6

Specifications are subject to change without prior notice

CFM2-3

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 3 kW bandpass filter 2 pole / 200 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM2-3/CC CFM2-3/DD 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 3.0 kW (selectivity ± 2.0 MHz) 2.5 kW (selectivity ± 1.6 MHz) INSERTION LOSS See table below CONNECTORS 7/8” Unfl.F 1-5/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 17.5 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.24 0.29 0.30 ± 1.6 0.29 0.34 0.35

Specifications are subject to change without prior notice

CFM3-3

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 3 kW bandpass filter 3 pole / 200 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM3-3/CC CFM3-3/DD 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 3.0 kW (selectivity ± 1.6 MHz) 2.5 kW (selectivity ± 1.2 MHz) 1.5 kW (selectivity ± 0.8 MHz) INSERTION LOSS See table below CONNECTORS 7/8” Unfl.F 1-5/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 25 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.6 0.25 0.27 0.29 ± 1.2 0.33 0.35 0.37 ± 0.8 0.47 0.51 0.55

Specifications are subject to change without prior notice

CFM4-3

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 3 kW bandpass filter 4 pole / 200 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM4-3/CC CFM4-3/DD 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.6 ÷ ± 1.2 MHz 3.0 kW (selectivity ± 1.0 ÷ ± 1.2 MHz) 2.5 kW (selectivity ± 0.8 MHz) 1.5 kW (selectivity ± 0.6 MHz) INSERTION LOSS See table below CONNECTORS 7/8” Unfl.F 1-5/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 33.5 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 0.38 0.39 0.40 SELECTIVITY (MHz) ± 1.2 ± 1.0 0.45 0.46 0.47 ± 0.8 0.53 0.55 0.56 0.68 0.70 0.71 ± 0.6

Specifications are subject to change without prior notice

CFM2-5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 5 kW bandpass filter 2 pole / 350 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM2-5/DD 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 6 kW (selectivity ± 2.0 MHz) 5 kW (selectivity ± 1.6 MHz) INSERTION LOSS See table below CONNECTORS 1-5/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, iron, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 49 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.18 0.19 0.20 ± 1.6 0.21 0.22 0.23

Specifications are subject to change without prior notice

CFM3-5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 5 kW bandpass filter 3 pole / 350 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM3-5/DD 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 7 kW (selectivity ± 1.6 MHz) 6 kW (selectivity ± 1.2 MHz) 5 kW (selectivity ± 0.8 MHz) INSERTION LOSS See table below CONNECTORS 1-5/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, iron, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 70 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.6 0.24 0.27 0.28 ± 1.2 0.28 0.31 0.32 ± 0.8 0.40 0.44 0.45

Specifications are subject to change without prior notice

CFM4-5

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 5 kW bandpass filter 4 pole / 350 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM4-5/DD 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz 7 kW (selectivity ± 1.0 MHz) 6 kW (selectivity ± 0.8 MHz) 5 kW (selectivity ± 0.6 MHz) INSERTION LOSS See table below CONNECTORS 1-5/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, iron, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 94 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.0 0.34 0.36 0.38 ± 0.8 0.39 0.41 0.42 ± 0.6 0.47 0.49 0.50

Specifications are subject to change without prior notice

CFM2-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 2 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM2-10/DD CFM2-10/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 12 kW (selectivity ± 2.0 MHz) 10 kW (selectivity ± 1.6 MHz) INSERTION LOSS See table below CONNECTORS 1-5/8” Unfl.F 3-1/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, iron, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 80 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz) ± 2.0 ± 1.6

87.5 0.12 0.14

98 0.125 0.145

108 0.13 0.15

Specifications are subject to change without prior notice

CFM3-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 3 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM3-10/DD CFM3-10/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 16 kW (selectivity ± 1.6 MHz) 13 kW (selectivity ± 1.2 MHz) 10 kW (selectivity ± 0.8 MHz) INSERTION LOSS See table below CONNECTORS 1-5/8” Unfl.F 3-1/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, iron, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 115 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz) ± 1.6 ± 1.2 ± 0.8

87.5 0.14 0.19 0.25

98 0.15 0.20 0.26

108 0.16 0.21 0.27

Specifications are subject to change without prior notice

CFM4-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 4 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM4-10/DD CFM4-10/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz 14 kW (selectivity ± 1.0 MHz) 12 kW (selectivity ± 0.8 MHz) 10 kW (selectivity ± 0.6 MHz) INSERTION LOSS See table below CONNECTORS 1-5/8” Unfl.F 3-1/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, iron, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 153 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) SELECTIVITY (MHz) ± 1.0 ± 0.8 ± 0.6

87.5 0.25 0.30 0.36

98 0.26 0.31 0.38

108 0.27 0.33 0.41

Specifications are subject to change without prior notice

CFM4ELL-10

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 10 kW bandpass filter 4 pole / 500 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 25 dB MAX INPUT POWER INSERTION LOSS CONNECTORS OPERATING TEMPERATURE RANGE OVER TEMPERATURE* MATERIALS EXTERNAL FINISHING WEIGHT

CFM4ELL-10/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.6 MHz 10 kW (selectivity ± 0.6 MHz) See table below 3-1/8” Unfl.F -10 ÷ +45 °C typical 30K at max input power Brass, aluminium, invar, iron, teflon Painted Ral 9005 148 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 0.6 0.36 0.38 0.41

Specifications are subject to change without prior notice

CFM2-20

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 20 kW bandpass filter 2 pole / 750 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM2-20/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 1.6 ÷ ± 2.0 MHz 25 kW (selectivity ± 2.0 MHz) 20 kW (selectivity ± 1.6 MHz) INSERTION LOSS See table below CONNECTORS 3-1/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power Brass, aluminium, invar, iron, teflon MATERIALS EXTERNAL FINISHING Painted Ral 9005 175 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 2.0 0.08 0.085 0.09 ± 1.6 0.10 0.105 0.11

Specifications are subject to change without prior notice

CFM3-20

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 20 kW bandpass filter 3 pole / 750 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM3-20/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.8 ÷ ± 1.6 MHz 35 kW (selectivity ± 1.6 MHz) 26 kW (selectivity ± 1.2 MHz) 20 kW (selectivity ± 0.8 MHz) INSERTION LOSS See table below CONNECTORS 3-1/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, iron, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 266 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 98 108 SELECTIVITY (MHz) ± 1.6 0.08 0.085 0.09 ± 1.2 0.11 0.115 0.12 ± 0.8 0.16 0.165 0.17

Specifications are subject to change without prior notice

CFM4-20

FM BANDPASS FILTER

FM FILTERS

FEATURES FM 20 kW bandpass filter 4 pole / 750 mm adjustable selectivity

ELECTRICAL DATA TYPE FREQUENCY RANGE IMPEDANCE RETURN LOSS SELECTIVITY stop band atten. 20 dB MAX INPUT POWER

CFM4-20/EE 87.5 ÷ 108 MHz 50 ohm ≥32 dB at carrier f0 ± 0.6 ÷ ± 1.0 MHz 28 kW (selectivity ± 1.0 MHz) 24 kW (selectivity ± 0.8 MHz) 20 kW (selectivity ± 0.6 MHz) INSERTION LOSS See table below CONNECTORS 3-1/8” Unfl.F OPERATING TEMPERATURE RANGE -10 ÷ +45 °C OVER TEMPERATURE* typical 30K at max input power MATERIALS Brass, aluminium, invar, iron, teflon EXTERNAL FINISHING Painted Ral 9005 WEIGHT 357 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

INSERTION LOSS at carrier f0 (dB) FREQUENCY (MHz) 87.5 SELECTIVITY (MHz) ± 1.0 0.19 ± 0.8 0.22 ± 0.6 0.26

98 0.20 0.23 0.28

108 0.21 0.25 0.31

Specifications are subject to change without prior notice

Functioning principles of FM combiners

UC/FM/LB2-4

FM Star Type Combiners - 0.2

UC/FM/LB3-4

FM Star Type Combiners - 0.6

UC/FM/LB4-4

FM Star Type Combiners - 1.2

UC/FM/LB2-6

FM Star Type Combiners - 2

UC/FM/LB3-6

FM Star Type Combiners - 3

UC/FM/LB4-6

FM Star Type Combiners - 5

UC/FM/LB2-10

FM Star Type Combiners - 10

UC/FM/LB3-10

FM Star Type Combiners - 20

UC/FM/LB4-10

UC/FM/LB2-0.4

UC/FM/LB2-20

UC/FM/LB3-0.4

UC/FM/LB3-20

UC/FM/LB2-1.2

UC/FM/LB4-20

UC/FM/LB3-1.2

UC/FM/LB4-20/F

UC/FM/LB4-1.2

UC/FM/LB2-40

UC/FM/LB2-2

UC/FM/LB3-40

UC/FM/LB3-2

UC/FM/LB4-40

UC/FM/LB4-2

57 Specifications are subject to change without prior notice

FM COMBINERS

FM Combiners

Functioning principles of FM combiners

The signal generated by a transmitter on frequency f1 is delivered to port 1 (Narrow Band input) of coupler A1 (3 dB coupler) which splits the power in two halves on to ports 2 and 3, whilst virtually no power goes to port 4 which is the absorber load port. The two half power signals flow through the band pass filters BP1 and BP2, both tuned on f1, and reach ports 2 and 3 of 3dB coupler A2. Due to the phase difference between the two half signals, they get summed up on A2 (3 dB coupler), so that the whole f1 transmitter power (less NB input loss) gets to port 4 of A2, which actually is the combiner output. Similarly, the signal from another transmitter (f2), is delivered to port 1 of coupler A2 (3 dB coupler). The signal is split in two by the 3 dB coupler and flows toward the band pass filters. Being these tuned on f1, f2 signal is rejected by the band pass filters, and as per the previous case, the phase difference between ports 2 and 3 of the 3 dB coupler allows the summed up half power f2 signals to get to the combiner output (port 4). By doing so both transmitter signals are summed up at the output and kept separated (isolation) by means of the 3 dB coupler directivity as well as by the selectivity of the band pass filters. In the event that a very high level of isolation is required in both directions (WB to NB and viceversa), it is recommended to add a band pass filter to the wide Band input or to add another combiner module to the same input so that there will be two Narrow Band inputs plus a “spare” wide Band input, winch can be used for emergency situations (any frequency of the FM spectrum can be operated through the WB input), or to add further modules in order to assemble multiplexers (n+1) with no limitations except of the power capacity of the last 3 dB coupler.

Tx 1 1  A1 (f1) 3

BP 1

(f1)

Antenna



SCHEMATIC DIAGRAM

Tx 2 1  A2 (f2)

f1 + f2

BP 2

FUNCTIONING PRINCIPLES OF FM STAR TYPE COMBINER The Star Type Combiner basically consists of parallel connecting several transmitters to a single antenna system through suitable bandpass filters, each one tuned on the transmitter frequency to which it is connected. The parallel connection is obtained by means of coaxial lines of critical lenght. The RF power generated by TX1 (ch1) passes through filter BP1 to the star centre C to which the antenna is connected. In order to transfer to the antenna the total power from TX1,the short circuit of TX2 at TX1 frequency , must be converted to an open circuit at the star junction centre by means of L2. The same applies for transferring power from transmitters TX2 and the related conversion lines L1, L2.

Specifications are subject to change without prior notice

SCHEMATIC DIAGRAM ANTENNA

⇑ TX1 (f1)

f1 + f2 L2

TX2 (f2)

↓

BP1

BP2

FM COMBINERS

FUNCTIONING PRINCIPLES OF FM DIRECTIONAL FILTER TYPE COMBINERS

FM STAR TYPE COMBINERS - 0.2kW

FEATURES 2, 3 and 4 channel combiners 2 or 3 pole / 85 mm temperature compensated adjustable selectivity

FM COMBINERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-0.2 DPLX UC/FM/ST3-0.2 TPLX UC/FM/ST2-0.2 TPLX UC/FM/ST3-0.2 QPLX UC/FM/ST2-0.2 QPLX UC/FM/ST3-0.2

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1

ISOLATION BETWEEN FREQ. (dB) ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.80 0.93 1.05 1.18 1.60 0.85 0.98 1.10 1.23 1.65 0.90 1.03 1.15 1.28 1.70

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

NF / NF or 7/16 F

FM STAR TYPE COMBINERS - 0.2kW MECHANICAL LAYOUTS QPLX UC/FM/ST2 - 0.2

740 MAX

489

QPLX UC/FM/ST3 - 0.2

TPLX UC/FM/ST3 - 0.2

740 MAX 239

320

740 MAX

DPLX UC/FM/ST3 - 0.2

329

239

235

FM COMBINERS

740 MAX

TPLX UC/FM/ST2 - 0.2

DPLX UC/FM/ST2 - 0.2

659

239

329

Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 0.6kW

FEATURES 2, 3 and 4 channel combiners 2 or 3 pole / 150 mm temperature compensated adjustable selectivity

FM COMBINERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-0.6

DPLX UC/FM/ST3-0.6 TPLX UC/FM/ST2-0.6 TPLX UC/FM/ST3-0.6 QPLX UC/FM/ST2-0.6 QPLX UC/FM/ST3-0.6

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08

ISOLATION BETWEEN FREQ. (dB) ≥30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.58 0.68 0.66 0.82 1.10 0.63 0.73 0.71 0.87 1.15 0.68 0.78 0.76 0.92 1.20

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

NF - 7/16 F

FM STAR TYPE COMBINERS - 0.6kW MECHANICAL LAYOUTS QPLX UC/FM/ST2 - 0.6

TPLX UC/FM/ST2 - 0.6

712

TPLX UC/FM/ST3 - 0.6

QPLX UC/FM/ST3 - 0.6

670 MAX

476

507

328

670 MAX

DPLX UC/FM/ST3 - 0.6

328

361

314

670 MAX

476

361

FM COMBINERS

670 MAX

DPLX UC/FM/ST2 - 0.6

1005

314

507

Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 1.2kW

FEATURES 2, 3 and 4 channel combiners 2 or 3 pole / 150 mm temperature compensated adjustable selectivity

FM COMBINERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-1.2 DPLX UC/FM/ST3-1.2 TPLX UC/FM/ST2-1.2 TPLX UC/FM/ST3-1.2 QPLX UC/FM/ST2-1.2 QPLX UC/FM/ST3-1.2

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

1.2 1.2 1.2 1.2 0.8 1.2 1.2 1.2 1.2 0.8 1.2 1.2 1.2 1.2 0.8

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08

ISOLATION BETWEEN FREQ. (dB) ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.50 0.58 0.55 0.68 0.92 0.55 0.63 0.60 0.73 0.97 0.60 0.68 0.65 0.78 1.02

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

7/8” EIA / 7/8” EIA

FM STAR TYPE COMBINERS - 1.2kW MECHANICAL LAYOUTS

QPLX UC/FM/ST2 - 1.2

680

QPLX UC/FM/ST3 - 1.2

680

Specifications are subject to change without prior notice

1360 MAX 390

550

1360 MAX

TPLX UC/FM/ST3 - 1.2

480

450

550

DPLX UC/FM/ST3 - 1.2

390

420

330

450

FM COMBINERS

1360 MAX

TPLX UC/FM/ST2 - 1.2

DPLX UC/FM/ST2 - 1.2

980

FM STAR TYPE COMBINERS - 2kW

FEATURES 2, 3 and 4 channel combiners 2 or 3 pole / 150 mm temperature compensated adjustable selectivity

FM COMBINERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-2 DPLX UC/FM/ST3-2 TPLX UC/FM/ST2-2 TPLX UC/FM/ST3-2 QPLX UC/FM/ST2-2 QPLX UC/FM/ST3-2

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

2.0 1.5 2.0 1.5 1.2 2.0 1.5 2.0 1.5 1.2 2.0 1.5 2.0 1.5 1.2

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08 1.08

ISOLATION BETWEEN FREQ. (dB) ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.50 0.58 0.55 0.68 0.92 0.55 0.63 0.60 0.73 0.97 0.60 0.68 0.65 0.78 1.02

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

7/8” EIA / 7/8” EIA

7/8” EIA / 7/8” EIA or 1-5/8” Unfl.

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 2kW MECHANICAL LAYOUTS TPLX UC/FM/ST2 - 2

QPLX UC/FM/ST2 - 2

DPLX UC/FM/ST3 - 2

TPLX UC/FM/ST3 - 2

QPLX UC/FM/ST3 - 2

FM COMBINERS

DPLX UC/FM/ST2 - 2

Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 3kW

FEATURES 2, 3 and 4 channel combiners 2 or 3 pole / 200 mm temperature compensated adjustable selectivity

FM COMBINERS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-3 DPLX UC/FM/ST3-3 TPLX UC/FM/ST2-3 TPLX UC/FM/ST3-3 QPLX UC/FM/ST2-3 QPLX UC/FM/ST3-3

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

3.0 2.5 3.0 2.5 1.5 3.0 2.5 3.0 2.5 1.5 3.0 2.5 3.0 2.5 1.5

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06

ISOLATION BETWEEN FREQ. (dB)

INSERTION LOSSES at fo (dB)

≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

≤ 040 ≤ 0.45 ≤ 0.39 ≤ 0.47 ≤ 0.65 ≤ 0.45 ≤ 0.50 ≤ 0.44 ≤ 0.52 ≤ 0.70 ≤ 0.50 ≤ 0.55 ≤ 0.49 ≤ 0.57 ≤ 0.75

* different conectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

7/8” EIA / 1-5/8” Unfl.

105

FM STAR TYPE COMBINERS - 3kW MECHANICAL LAYOUTS TPLX UC/FM/ST2 - 3

QPLX UC/FM/ST2 - 3

DPLX UC/FM/ST3 - 3

TPLX UC/FM/ST3 - 3

QPLX UC/FM/ST3 - 3

FM COMBINERS

DPLX UC/FM/ST2 - 3

Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 5kW

FEATURES 2 and 3 channel combiners 2 or 3 pole / 350 mm temperature compensated adjustable selectivity

FM COMBINERS GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-5 DPLX UC/FM/ST3-5 TPLX UC/FM/ST2-5 TPLX UC/FM/ST3-5

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

5 5 5 5 5 5 5 5 5 5

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06

ISOLATION BETWEEN FREQ. (dB) ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.30 0.33 0.38 0.42 0.55 0.35 0.38 0.43 0.47 0.60

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

1-5/8” Unfl. / 1-5/8” Unfl.

106

1-5/8” Unfl. / 1-5/8” Unfl.

146

1-5/8” Unfl. / 1-5/8” Unfl.

180

1-5/8” Unfl. / 1-5/8” Unfl.

240

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 5kW MECHANICAL LAYOUTS TPLX UC/FM/ST2 - 5

DPLX UC/FM/ST3 - 5

TPLX UC/FM/ST3 - 5

FM COMBINERS

DPLX UC/FM/ST2 - 5

Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 10kW

FEATURES 2 and 3 channel combiners 2 or 3 pole / 500 mm temperature compensated adjustable selectivity

FM COMBINERS GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-10 DPLX UC/FM/ST3-10 TPLX UC/FM/ST2-10 TPLX UC/FM/ST3-10

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

10 10 10 10 10 10 10 10 10 10

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06

ISOLATION BETWEEN FREQ. (dB) ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.23 0.25 0.26 0.31 0.37 0.28 0.30 0.31 0.36 0.42

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

1-5/8” Unfl. / 3-1/8” Unfl.

197

1-5/8” Unfl. / 3-1/8” Unfl.

266

1-5/8” Unfl. / 3-1/8” Unfl.

293

1-5/8” Unfl. / 3-1/8” Unfl.

398

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 10kW MECHANICAL LAYOUTS DPLX UC/FM/ST2 - 10

1046

FM COMBINERS

1744

1570

TPLX UC/FM/ST2 - 10

1870

1230

DPLX UC/FM/ST3 - 10

1548

1570

1744

TPLX UC/FM/ST3 - 10

1230

1870

Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 20kW

FEATURES 2 and 3 channel combiners 2 or 3 pole / 750 mm temperature compensated adjustable selectivity

FM COMBINERS GENERAL FEATURES FREQUENCY RANGE IMPEDANCE VSWR MAX POWER CONNECTORS* WEIGHT OPERATING TEMPERATURE RANGE OVER TEMPERATURE** ISOLATION

87.5 ÷ 108 MHz 50 ohm See table See table See table See table -10 ÷ +45° C typical 30K at max input power See table

ELECTRICAL AND MECHANICAL DATA FREQUENCIES MAX POWER TYPE SPACING PER CHANNEL (MHz) (kW) DPLX UC/FM/ST2-20 DPLX UC/FM/ST3-20 TPLX UC/FM/ST2-20 TPLX UC/FM/ST3-20

≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2 ≥ 3.0 ≥ 2.0 ≥ 2.0 ≥ 1.6 ≥ 1.2

20 20 20 20 20 20 20 20 20 20

V.SW.R INPUT at fo ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06 1.06

ISOLATION BETWEEN FREQ. (dB) ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30 ≥ 30

INSERTION LOSSES at fo (dB) ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤

0.19 0.21 0.19 0.22 0.27 0.24 0.26 0.24 0.27 0.32

CONNECTORS* INPUTS / OUTPUT

WEIGHT (Kg)

3-1/8” Unfl. / 3-1/8” Unfl.

430

3-1/8” Unfl. / 3-1/8” Unfl.

610

3-1/8” Unfl. / 6-1/8” Unfl.

610

3-1/8” Unfl. / 6-1/8” Unfl.

890

* different connectors upon request ** referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM STAR TYPE COMBINERS - 20kW MECHANICAL LAYOUTS TPLX UC/FM/ST2 - 20

DPLX UC/FM/ST3 - 20

TPLX UC/FM/ST3 - 20

FM COMBINERS

DPLX UC/FM/ST2 - 20

Specifications are subject to change without prior notice

UC/FM/LB2-0.4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 85 mm adjustable selectivity temperature compensated

FM COMBINERS 740 Max

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-0.4 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 28 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.80 dB NB input with freq. spacing ±1.6 MHz ≤ 0.93 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 30 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 0.4 kW 0.4 kW - Wideband input 1 kW 1 kW - Total output 1 kW 1 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS NF - Narrowband input 7/16 F - Wideband input 7/16 F OUTPUT PORT 18 kg WEIGHT

OUTPUT

340

WB INPUT

NB INPUT

230

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB3-0.4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 3 pole / 85 mm adjustable selectivity temperature compensated

740 Max

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-0.4 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 28 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.4 MHz ≤ 1.05 dB NB input with freq. spacing ±1.2 MHz ≤ 1.18 dB NB input with freq. spacing ±0.8 MHz ≤ 1.60 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 30 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.4 ±1.2 ±0.8 - Narrowband input 0.4 kW 0.4 kW 0.4 kW - Wideband input 1 kW 1 kW 1 kW - Total output 1 kW 1 kW 1 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS NF - Narrowband input 7/16 F - Wideband input 7/16 F OUTPUT PORT 22 kg WEIGHT

OUTPUT

420

WB INPUT

NB INPUT

230

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB2-1.2

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 150 mm adjustable selectivity temperature compensated

FM COMBINERS 700

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-1.2 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 28 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.58 dB NB input with freq. spacing ±1.6 MHz ≤ 0.68 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 30 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 1.2 kW 1.2 kW - Wideband input 3 kW 3 kW - Total output 3 kW 3 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/16 F - Narrowband input 7/16 F - Wideband input 7/16 F OUTPUT PORT 32 kg WEIGHT

WB INPUT

420

OUTPUT

NB INPUT

310

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB3-1.2

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 3 pole / 150 mm adjustable selectivity temperature compensated

700

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-1.2 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 28 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.66 dB NB input with freq. spacing ±1.2 MHz ≤ 0.82 dB NB input with freq. spacing ±0.8 MHz ≤ 1.10 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 30 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.6 ±1.2 ±0.8 - Narrowband input 1.2 kW 1.2 kW 1.2 kW - Wideband input 3 kW 3 kW 3 kW - Total output 3 kW 3 kW 3 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS - Narrowband input 7/16 F 7/16 F - Wideband input OUTPUT PORT 7/16 F WEIGHT 44 kg

OUTPUT

570

WB INPUT

NB INPUT

310

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB4-1.2

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

700

OUTPUT

WB INPUT

432

FM COMBINERS

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB4-1.2 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 28 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.2 MHz ≤ 0.98 dB NB input with freq. spacing ±1.0 MHz ≤ 1.08 dB NB input with freq. spacing ±0.8 MHz ≤ 1.28 dB NB input with freq. spacing ±0.6 MHz ≤ 1.60 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.6 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 30 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±50 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±100 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.2 ±1.0 ±0.8 ±0.6 - Narrowband input 1.2 kW 1.2 kW 1.2 kW 1.2 kW - Wideband input 3 kW 3 kW 3 kW 3 kW - Total output 3 kW 3 kW 3 kW 3 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/16 F - Narrowband input 7/16 F - Wideband input 7/16 F OUTPUT PORT 56 kg WEIGHT

FM double bridge channel combiner 4 pole / 150 mm adjustable selectivity temperature compensated

NB INPUT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

610

Specifications are subject to change without prior notice

UC/FM/LB2-2

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 2 pole / 150 mm adjustable selectivity temperature compensated

1480

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-2 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 28 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.50 dB NB input with freq. spacing ±1.6 MHz ≤ 0.58 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 2 kW 2 kW - Wideband input 5 kW 5 kW - Total output 5 kW 5 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input 7/8” EIA OUTPUT PORT 34 kg WEIGHT

OUTPUT

325

WB INPUT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

423

Specifications are subject to change without prior notice

NB INPUT

UC/FM/LB3-2

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 3 pole / 150 mm adjustable selectivity temperature compensated

1480

OUTPUT

WB INPUT

470

FM COMBINERS

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-2 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 28 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.55 dB NB input with freq. spacing ±1.2 MHz ≤ 0.68 dB NB input with freq. spacing ±0.8 MHz ≤ 0.92 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.6 ±1.2 ±0.8 - Narrowband input 2 kW 2 kW 1.5 kW - Wideband input 5 kW 5 kW 5 kW - Total output 5 kW 5 kW 5 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input OUTPUT PORT 7/8” EIA WEIGHT 44 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

423

Specifications are subject to change without prior notice

NB INPUT

UC/FM/LB4-2

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

1370

WB INPUT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

OUTPUT

328

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB4-2 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 28 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.2 MHz ≤ 0.75 dB NB input with freq. spacing ±1.0 MHz ≤ 0.85 dB NB input with freq. spacing ±0.8 MHz ≤ 0.99 dB NB input with freq. spacing ±0.6 MHz ≤ 1.22 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.6 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±50 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±100 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.2 ±1.0 ±0.8 ±0.6 - Narrowband input 2 kW 2 kW 1.5 kW 1 kW - Wideband input 5 kW 5 kW 5 kW 5 kW - Total output 5 kW 5 kW 5 kW 5 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input OUTPUT PORT 7/8” EIA WEIGHT 55 kg

FM COMBINERS

FM double bridge channel combiner 4 pole / 150 mm adjustable selectivity temperature compensated

820

Specifications are subject to change without prior notice

NB INPUT

UC/FM/LB2-4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 2 pole / 150 mm adjustable selectivity temperature compensated

FM COMBINERS 1370

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-4 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input - narrowband input (at carrier fo) ≥ 28 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.50 dB NB input with freq. spacing ±1.6 MHz ≤ 0.58 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 4 kW 3 kW - Wideband input 6 kW 6 kW - Total output 6 kW 6 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input 7/8” EIA OUTPUT PORT 43 kg WEIGHT

OUTPUT

442

WB INPUT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

503

Specifications are subject to change without prior notice

NB INPUT

UC/FM/LB3-4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 3 pole / 150 mm adjustable selectivity temperature compensated

1370

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-4 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input ≥ 28 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.55 dB NB input with freq. spacing ±1.2 MHz ≤ 0.68 dB NB input with freq. spacing ±0.8 MHz ≤ 0.92 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.6 ±1.2 ±0.8 - Narrowband input 4 kW 3 kW 2 kW - Wideband input 6 kW 6 kW 6 kW - Total output 6 kW 6 kW 6 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input OUTPUT PORT 7/8” EIA WEIGHT 50 kg

WB INPUT

642

OUTPUT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

503

Specifications are subject to change without prior notice

NB INPUT

UC/FM/LB4-4

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

1370

WB INPUT

OUTPUT PORT WEIGHT

7/8” EIA 63 kg * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C

OUTPUT

503

FM COMBINERS

ELECTRICAL AND MECHANICAL DATA UC/FM/LB4-4 COMBINER TYPE FREQUENCY RANGE 87.5 ÷ 108 MHz - wideband input Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input ≥ 28 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) ≤ 0.75 dB NB input with freq. spacing ±1.2 MHz ≤ 0.85 dB NB input with freq. spacing ±1.0 MHz ≤ 0.99 dB NB input with freq. spacing ±0.8 MHz ≤ 1.22 dB NB input with freq. spacing ±0.6 MHz ≤ 0.10 dB WB input ≤ 0.20 dB WB input with freq. spacing ±0.6 MHz ISOLATION (at carrier fo) ≥ 32 dB - Narrowband input to wideband input ≥ 50 dB - Wideband input to narrowband input ≤ ±50 ns at fo ±100 kHz GROUP DELAY ≤ ±100 ns at fo ±150 kHz (With 0.8 MHz frequency spacing) ±1.2 ±1.0 ±0.8 ±0.6 MAX POWER RATINGS / freq. spacing (MHz) - Narrowband input 4 kW 3 kW 3 kW 2 kW - Wideband input 6 kW 6 kW 6 kW 6 kW 6 kW 6 kW 6 kW 6 kW - Total output -10 ÷ +45° C OPERATING TEMPERATURE RANGE typical 30K at max NB input power OVER TEMPERATURE* INPUT PORTS 7/8” EIA - Narrowband input 7/8” EIA - Wideband input

FM double bridge channel combiner 4 pole / 150 mm adjustable selectivity temperature compensated

842

Specifications are subject to change without prior notice

NB INPUT

UC/FM/LB2-6

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 2 pole / 200 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA UC/FM/LB2-6/A COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 30 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.40 dB NB input with freq. spacing ±1.6 MHz ≤ 0.45 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 6 kW 5 kW - Wideband input 12 kW 12 kW - Total output 12 kW 12 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 1-5/8” Unfl. - Wideband input 1-5/8” Unfl. OUTPUT PORT 51 kg WEIGHT

UC/FM/LB2-6/B

UC/FM/LB2-6/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 30 dB

≤ 0.40 dB ≤ 0.45 dB ≤ 0.10 dB

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz ±2.0 ±1.6 6 kW 5 kW 20 kW 20 kW 25 kW 25 kW -10 ÷ +45° C typical 30K at max NB input power

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 65 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 56 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB2-6

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB2-6/A

UC/FM/LB2-6/B

UC/FM/LB2-6/C

1463

1326

1463

FM COMBINERS

OUTPUT

WB INPUT

OUTPUT

WB INPUT

525

442

WB INPUT

NB INPUT

900

Specifications are subject to change without prior notice

NB INPUT

531

NB INPUT

UC/FM/LB3-6

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

ELECTRICAL AND MECHANICAL DATA UC/FM/LB3-6/A COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 30 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.39 dB NB input with freq. spacing ±1.2 MHz ≤ 0.47 dB NB input with freq. spacing ±0.8 MHz ≤ 0.65 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.6 ±1.2 ±0.8 - Narrowband input 6 kW 5 kW 3 kW - Wideband input 12 kW 12 kW 12 kW - Total output 12 kW 12 kW 12 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 7/8” EIA - Narrowband input 1-5/8” Unfl. - Wideband input 1-5/8” Unfl. OUTPUT PORT 66 kg WEIGHT

UC/FM/LB3-6/B

UC/FM/LB3-6/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 30 dB

≤ 0.39 dB ≤ 0.47 dB ≤ 0.65 dB ≤ 0.10 dB ≤ 0.20 dB

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz ±1.6 ±1.2 ±0.8 6 kW 5 kW 3 kW 20 kW 20 kW 20 kW 25 kW 25 kW 25 kW -10 ÷ +45° C typical 30K at max NB input power

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 80 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 71 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM COMBINERS

FM double bridge channel combiner 3 pole / 200 mm adjustable selectivity temperature compensated

UC/FM/LB3-6

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB3-6/A

UC/FM/LB3-6/B

UC/FM/LB3-6/C

WB INPUT

OUTPUT

642

WB INPUT

OUTPUT

642

WB INPUT

525

1463

1326

1463

FM COMBINERS

OUTPUT

NB INPUT

Specifications are subject to change without prior notice

NB INPUT

900

531

NB INPUT

UC/FM/LB4-6

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

ELECTRICAL AND MECHANICAL DATA UC/FM/LB4-6/A UC/FM/LB4-6/B UC/FM/LB4-6/C COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz 87.5 ÷ 108 MHz 87.5 ÷ 108 MHz Tunable over entire FM range Tunable over entire FM range Tunable over entire FM range - narrowband input 50 ohm 50 ohm 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 26 dB ≥ 26 dB - narrowband input (at carrier fo) ≥ 30 dB ≥ 30 dB ≥ 30 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.2 MHz ≤ 0.50 dB ≤ 0.50 dB ≤ 0.50 dB NB input with freq. spacing ±1.0 MHz ≤ 0.57 dB ≤ 0.57 dB ≤ 0.57 dB NB input with freq. spacing ±0.8 MHz ≤ 0.66 dB ≤ 0.66 dB ≤ 0.66 dB NB input with freq. spacing ±0.6 MHz ≤ 0.81 dB ≤ 0.81 dB ≤ 0.81 dB WB input ≤ 0.10 dB ≤ 0.10 dB ≤ 0.10 dB ≤ 0.20 dB WB input with freq. spacing ±0.6 MHz ≤ 0.20 dB ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB ≥ 32 dB ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB ≥ 50 dB ≥ 50 dB GROUP DELAY ≤ ±50 ns at fo ±100 kHz ≤ ±50 ns at fo ±100 kHz ≤ ±50 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±100 ns at fo ±150 kHz ≤ ±100 ns at fo ±150 kHz ≤ ±100 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.2 ±1.2 ±1.0 ±0.8 ±0.6 ±1.0 ±0.8 ±0.6 ±1.2 ±1.0 ±0.8 ±0.6 - Narrowband input 6 kW 5 kW 3 kW 6 kW 6 kW 5 kW 3 kW 6 kW 6 kW 5 kW 3 kW 6 kW - Wideband input 12 kW 12 kW 12 kW 12 kW 20 kW 20 kW 20 kW 20 kW 20 kW 20 kW 20 kW 20 kW - Total output 12 kW 12 kW 12 kW 12 kW 25 kW 25 kW 25 kW 25 kW 25 kW 25 kW 25 kW 25 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C -10 ÷ +45° C -10 ÷ +45° C typical 30K at max NB input power OVER TEMPERATURE* typical 30K at max NB input power typical 30K at max NB input power INPUT PORTS 1-5/8” Unfl. 7/8” EIA 1-5/8” Unfl. - Narrowband input 3-1/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. 1-5/8” Unfl. 3-1/8” Unfl. OUTPUT PORT 88 kg 83 kg 97 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM COMBINERS

FM double bridge channel combiner 4 pole / 200 mm adjustable selectivity temperature compensated

UC/FM/LB4-6

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB4-6/A

UC/FM/LB4-6/B

UC/FM/LB4-6/C

WB INPUT

OUTPUT

842

WB INPUT

OUTPUT

842

WB INPUT

525

1463

1326

1463

FM COMBINERS

OUTPUT

NB INPUT

900

Specifications are subject to change without prior notice

NB INPUT

531

NB INPUT

UC/FM/LB2-10

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 2 pole / 350 mm or 500 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA UC/FM/LB2-10/A COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.25 dB NB input with freq. spacing ±1.6 MHz ≤ 0.28 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 10 kW 10 kW - Wideband input 30 kW 30 kW - Total output 30 kW 30 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 1-5/8” Unfl. - Narrowband input 1-5/8” Unfl. / 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 131 kg WEIGHT

UC/FM/LB2-10/B

UC/FM/LB2-10/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.25 dB ≤ 0.28 dB ≤ 0.10 dB

≤ 0.18 dB ≤ 0.20 dB ≤ 0.10 dB

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz ±2.0 ±1.6 10 kW 10 kW 30 kW 30 kW 30 kW 30 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz ±2.0 ±1.6 10 kW 10 kW 40 kW 40 kW 40 kW 40 kW -10 ÷ +45° C typical 30K at max NB input power

1-5/8” Unfl. 1-5/8” Unfl. / 3-1/8” Unfl. 3-1/8” Unfl. 128 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 210 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB2-10

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB2-10/A

UC/FM/LB2-10/B

FM COMBINERS Specifications are subject to change without prior notice

UC/FM/LB2-10/C

UC/FM/LB3-10

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

ELECTRICAL AND MECHANICAL DATA UC/FM/LB3-10/A COMBINER TYPE FREQUENCY RANGE 87.5 ÷ 108 MHz - wideband input Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) ≤ 0.33 dB NB input with freq. spacing ±1.6 MHz ≤ 0.37 dB NB input with freq. spacing ±1.2 MHz ≤ 0.50 dB NB input with freq. spacing ±0.8 MHz ≤ 0.10 dB WB input ≤ 0.20 dB WB input (0.8MHz freq. spacing) ISOLATION (at carrier fo) ≥ 32 dB - Narrowband input to wideband input ≥ 50 dB - Wideband input to narrowband input ≤ ±40 ns at fo ±100 kHz GROUP DELAY ≤ ±80 ns at fo ±150 kHz (With 0.8 MHz frequency spacing) ±1.6 ±1.2 ±0.8 MAX POWER RATINGS / freq. spacing (MHz) - Narrowband input 10 kW 10 kW 10 kW - Wideband input 30 kW 30 kW 30 kW - Total output 30 kW 30 kW 30 kW -10 ÷ +45° C OPERATING TEMPERATURE RANGE typical 30K at max NB input power OVER TEMPERATURE* INPUT PORTS 1-5/8” Unfl. - Narrowband input 1-5/8” Unfl. / 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 173 kg WEIGHT

UC/FM/LB3-10/B

UC/FM/LB3-10/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.33 dB ≤ 0.37 dB ≤ 0.50 dB ≤ 0.10 dB ≤ 0.20 dB

≤ 0.21 dB ≤ 0.26 dB ≤ 0.32 dB ≤ 0.10 dB ≤ 0.15 dB

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz ±1.6 ±1.2 ±0.8 10 kW 10 kW 10 kW 30 kW 30 kW 30 kW 30 kW 30 kW 30 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz ±1.6 ±1.2 ±0.8 10 kW 10 kW 10 kW 40 kW 40 kW 40 kW 40 kW 40 kW 40 kW -10 ÷ +45° C typical 30K at max NB input power

1-5/8” Unfl. 1-5/8” Unfl. / 3-1/8” Unfl. 3-1/8” Unfl. 170 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 275 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM COMBINERS

FM double bridge channel combiner 3 pole / 350 mm or 500 mm adjustable selectivity temperature compensated

UC/FM/LB3-10

FM DIRECTIONAL FILTER TYPE COMBINER MECHANICAL LAYOUT UC/FM/LB3-10/A

UC/FM/LB3-10/B

FM COMBINERS

Picture refers to UC/FM/LB3-10/A

Specifications are subject to change without prior notice

UC/FM/LB3-10/C

UC/FM/LB4-10

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

ELECTRICAL AND MECHANICAL DATA UC/FM/LB4-10/A COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.0 MHz ≤ 0.43 dB NB input with freq. spacing ±0.8 MHz ≤ 0.47 dB NB input with freq. spacing ±0.6 MHz ≤ 0.55 dB WB input ≤ 0.10 dB WB input (0.6MHz freq. spacing) ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±50 ns at fo ±100 kHz (With 0.6 MHz frequency spacing) ≤ ±100 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.0 ±0.8 ±0.6 - Narrowband input 10 kW 10 kW 10 kW - Wideband input 30 kW 30 kW 30 kW - Total output 30 kW 30 kW 30 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 1-5/8” Unfl. - Narrowband input 1-5/8” Unfl. / 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 220 kg WEIGHT

UC/FM/LB4-10/B

UC/FM/LB4-10/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.43 dB ≤ 0.47 dB ≤ 0.55 dB ≤ 0.10 dB ≤ 0.20 dB

≤ 0.32 dB ≤ 0.38 dB ≤ 0.46 dB ≤ 0.10 dB ≤ 0.20 dB

≥ 32 dB ≥ 50 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz ±1.0 ±0.8 ±0.6 10 kW 10 kW 10 kW 30 kW 30 kW 30 kW 30 kW 30 kW 30 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 50 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz ±1.0 ±0.8 ±0.6 10 kW 10 kW 10 kW 40 kW 40 kW 40 kW 40 kW 40 kW 40 kW -10 ÷ +45° C typical 30K at max NB input power

1-5/8” Unfl. 1-5/8” Unfl. / 3-1/8” Unfl. 3-1/8” Unfl. 205 kg

1-5/8” Unfl. 3-1/8” Unfl. 3-1/8” Unfl. 355 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM COMBINERS

FM double bridge channel combiner 4 pole / 350 mm or 500 mm adjustable selectivity temperature compensated

UC/FM/LB4-10

FM DIRECTIONAL FILTER TYPE COMBINER MECHANICAL LAYOUT UC/FM/LB4-10/A

UC/FM/LB4-10/B

FM COMBINERS

Picture refers to UC/FM/LB4-10/C

Specifications are subject to change without prior notice

UC/FM/LB4-10/C

UC/FM/LB2-20

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 2 pole / 500 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-20/A FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.18 dB NB input with freq. spacing ±1.6 MHz ≤ 0.20 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 20 kW 20 kW - Wideband input 40 kW 40 kW - Total output 40 kW 40 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 3-1/8” Unfl. - Narrowband input 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 215 kg WEIGHT

UC/FM/LB2-20/B

UC/FM/LB2-20/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.18 dB ≤ 0.20 dB ≤ 0.10 dB

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz ±2.0 ±1.6 20 kW 20 kW 70 kW 70 kW 70 kW 70 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 50 dB ≤ ±25 ns at fo ±100 kHz ≤ ±50 ns at fo ±150 kHz ±2.0 ±1.6 20 kW 20 kW 100 kW 100 kW 100 kW 100 kW -10 ÷ +45° C typical 30K at max NB input power

3-1/8” Unfl. 3-1/8” Unfl. / 4-1/2” Unfl. 4-1/2” Unfl. 230 kg

3-1/8” Unfl. 4-1/2” Unfl. / 6-1/8” Unfl. 6-1/8” Unfl. 250 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB2-20

FM DIRECTIONAL FILTER TYPE COMBINER

MECHANICAL LAYOUT UC/FM/LB2-20/A

UC/FM/LB2-20/B

FM COMBINERS Specifications are subject to change without prior notice

UC/FM/LB2-20/C

UC/FM/LB3-20

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

ELECTRICAL AND MECHANICAL DATA UC/FM/LB3-20/A COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz Tunable over entire FM range - narrowband input 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS ≥ 26 dB - wideband input ≥ 32 dB - narrowband input (at carrier fo) INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.21 dB NB input with freq. spacing ±1.2 MHz ≤ 0.26 dB NB input with freq. spacing ±0.8 MHz ≤ 0.32 dB WB input ≤ 0.10 dB WB input (0.8MHz freq. spacing) ≤ 0.15 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.6 ±1.2 ±0.8 - Narrowband input 20 kW 20 kW 20 kW - Wideband input 40 kW 40 kW 40 kW - Total output 40 kW 40 kW 40 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS 3-1/8” Unfl. - Narrowband input 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 285 kg WEIGHT

UC/FM/LB3-20/B

UC/FM/LB3-20/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.21 dB ≤ 0.26 dB ≤ 0.32 dB ≤ 0.10 dB ≤ 0.15 dB

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz ±1.6 ±1.2 ±0.8 20 kW 20 kW 20 kW 70 kW 70 kW 70 kW 70 kW 70 kW 70 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 50 dB ≤ ±40 ns at fo ±100 kHz ≤ ±80 ns at fo ±150 kHz ±1.6 ±1.2 ±0.8 20 kW 20 kW 20 kW 100 kW 100 kW 100 kW 100 kW 100 kW 100 kW -10 ÷ +45° C typical 30K at max NB input power

3-1/8” Unfl. 3-1/8” Unfl. / 4-1/2” Unfl. 4-1/2” Unfl. 300 kg

3-1/8” Unfl. 4-1/2” Unfl. / 6-1/8” Unfl. 6-1/8” Unfl. 320 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM COMBINERS

FM double bridge channel combiner 3 pole / 500 mm adjustable selectivity temperature compensated

UC/FM/LB3-20

FM DIRECTIONAL FILTER TYPE COMBINER MECHANICAL LAYOUT UC/FM/LB3-20/A

UC/FM/LB3-20/B

FM COMBINERS Specifications are subject to change without prior notice

UC/FM/LB3-20/C

UC/FM/LB4-20

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

ELECTRICAL AND MECHANICAL DATA UC/FM/LB4-20/A COMBINER TYPE FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.0 MHz ≤ 0.32 dB NB input with freq. spacing ±0.8 MHz ≤ 0.38 dB NB input with freq. spacing ±0.6 MHz ≤ 0.46 dB WB input ≤ 0.10 dB WB input (0.6MHz freq. spacing) ≤ 0.20 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±50 ns at fo ±100 kHz (With 0.6 MHz frequency spacing) ≤ ±100 ns at fo ±150 kHz ±1.0 ±0.8 ±0.6 MAX POWER RATINGS / freq. spacing (MHz) 20 kW 20 kW 20 kW - Narrowband input 40 kW 40 kW 40 kW - Wideband input 40 kW 40 kW 40 kW - Total output -10 ÷ +45° C OPERATING TEMPERATURE RANGE typical 30K at max NB input power OVER TEMPERATURE* INPUT PORTS 3-1/8” Unfl. - Narrowband input 3-1/8” Unfl. - Wideband input 3-1/8” Unfl. OUTPUT PORT 360 kg WEIGHT

UC/FM/LB4-20/B

UC/FM/LB4-20/C

87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm

≥ 26 dB ≥ 32 dB

≤ 0.32 dB ≤ 0.38 dB ≤ 0.46 dB ≤ 0.10 dB ≤ 0.20 dB

≥ 32 dB ≥ 50 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz ±1.0 ±0.8 ±0.6 20 kW 20 kW 20 kW 70 kW 70 kW 70 kW 70 kW 70 kW 70 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 50 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz ±1.0 ±0.8 ±0.6 20 kW 20 kW 20 kW 100 kW 100 kW 100 kW 100 kW 100 kW 100 kW -10 ÷ +45° C typical 30K at max NB input power

3-1/8” Unfl. 3-1/8” Unfl. / 4-1/2” Unfl. 4-1/2” Unfl. 375 kg

3-1/8” Unfl. 4-1/2” Unfl. / 6-1/8” Unfl. 6-1/8” Unfl. 395 kg

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

FM COMBINERS

FM double bridge channel combiner 4 pole / 500 mm adjustable selectivity temperature compensated

UC/FM/LB4-20

FM DIRECTIONAL FILTER TYPE COMBINER MECHANICAL LAYOUT UC/FM/LB4-20/A

UC/FM/LB4-20/B

FM COMBINERS

Picture refers to UC/FM/LB4-20/A

Specifications are subject to change without prior notice

UC/FM/LB4-20/C

UC/FM/LB4-20/F

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 4 pole / 500 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB4-20/B/F FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range INPUTS AND OUTPUT IMPEDANCE 50 ohm RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±0.6 MHz WB input WB input (0.6MHz freq. spacing)

UC/FM/LB4-20/C/F 87.5 ÷ 108 MHz Tunable over entire FM range 50 ohm ≥ 26 dB ≥ 32 dB

≤ 0.45 dB ≤ 0.10 dB ≤ 0.20 dB

≥ 32 dB ≥ 55 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz ±0.6 20 kW 70 kW 70 kW -10 ÷ +45° C typical 30K at max NB input power

≥ 32 dB ≥ 55 dB ≤ ±50 ns at fo ±100 kHz ≤ ±100 ns at fo ±150 kHz ±0.6 20 kW 100 kW 100 kW -10 ÷ +45° C typical 30K at max NB input power

3-1/8” Unfl. 3-1/8” Unfl. / 4-1/2” Unfl. 4-1/2” Unfl. 365 kg

3-1/8” Unfl. 4-1/2” Unfl. / 6-1/8” Unfl. 6-1/8” Unfl. 377 kg

ISOLATION (at carrier fo) - Narrowband input to wideband input - Wideband input to narrowband input

GROUP DELAY (With 0.6 MHz frequency spacing)

MAX POWER RATINGS / freq. spacing (MHz) - Narrowband input - Wideband input - Total output

OPERATING TEMPERATURE RANGE OVER TEMPERATURE* INPUT PORTS - Narrowband input - Wideband input

OUTPUT PORT WEIGHT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB4-20/F

FM DIRECTIONAL FILTER TYPE COMBINER

UC/FM/LB4-20/C/F

FM COMBINERS

UC/FM/LB4-20/B/F

MECHANICAL LAYOUT

Specifications are subject to change without prior notice

UC/FM/LB2-40

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 2 pole / 750 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB2-40 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±2.0 MHz ≤ 0.14 dB NB input with freq. spacing ±1.6 MHz ≤ 0.16 dB WB input ≤ 0.10 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±25 ns at fo ±100 kHz (With 1.6 MHz frequency spacing) ≤ ±50 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±2.0 ±1.6 - Narrowband input 40 kW 40 kW - Wideband input 160 kW 160 kW - Total output 160 kW 160 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS - Narrowband input 3-1/8” Unfl. - Wideband input 6-1/8” Unfl. 6-1/8” Unfl. OUTPUT PORT 450 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB3-40

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES FM double bridge channel combiner 3 pole / 750 mm adjustable selectivity temperature compensated

FM COMBINERS

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB3-40 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.6 MHz ≤ 0.14 dB NB input with freq. spacing ±1.2 MHz ≤ 0.17 dB NB input with freq. spacing ±0.8 MHz ≤ 0.22 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.8 MHz ≤ 0.15 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.6 ±1.2 ±0.8 - Narrowband input 40 kW 40 kW 40 kW - Wideband input 160 kW 160 kW 160 kW - Total output 160 kW 160 kW 160 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS - Narrowband input 3-1/8” Unfl. - Wideband input 6-1/8” Unfl. 6-1/8” Unfl. OUTPUT PORT 630 kg WEIGHT * referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

UC/FM/LB4-40

FM DIRECTIONAL FILTER TYPE COMBINER

FEATURES

FM COMBINERS

FM double bridge channel combiner 4 pole / 750 mm adjustable selectivity temperature compensated

ELECTRICAL AND MECHANICAL DATA COMBINER TYPE UC/FM/LB4-40 FREQUENCY RANGE - wideband input 87.5 ÷ 108 MHz - narrowband input Tunable over entire FM range 50 ohm INPUTS AND OUTPUT IMPEDANCE RETURN LOSS - wideband input ≥ 26 dB - narrowband input (at carrier fo) ≥ 32 dB INSERTION LOSS (at carrier fo) NB input with freq. spacing ±1.0 MHz ≤ 0.26 dB NB input with freq. spacing ±0.8 MHz ≤ 0.30 dB NB input with freq. spacing ±0.6 MHz ≤ 0.36 dB WB input ≤ 0.10 dB WB input with freq. spacing ±0.6 MHz ≤ 0.15 dB ISOLATION (at carrier fo) - Narrowband input to wideband input ≥ 32 dB - Wideband input to narrowband input ≥ 50 dB GROUP DELAY ≤ ±40 ns at fo ±100 kHz (With 0.8 MHz frequency spacing) ≤ ±80 ns at fo ±150 kHz MAX POWER RATINGS / freq. spacing (MHz) ±1.0 ±0.8 ±0.6 - Narrowband input 40 kW 40 kW 40 kW - Wideband input 160 kW 160 kW 160 kW - Total output 160 kW 160 kW 160 kW OPERATING TEMPERATURE RANGE -10 ÷ +45° C OVER TEMPERATURE* typical 30K at max NB input power INPUT PORTS - Narrowband input 3-1/8” Unfl. - Wideband input 6-1/8” Unfl. 6-1/8” Unfl. OUTPUT PORT 820 kg WEIGHT

OUTPUT

WB INPUT

NB INPUT

* referred to Ambient Temperature. Recommended: [AmbientTemp. + OverTemp.] ≤60°C Specifications are subject to change without prior notice

Rigid Lines

Fine Matchers

Directional Couplers

Frequency Equalized Directional Coupler

Coaxial Elbows

Coaxial Adaptors

100

FM 3db coupler

103

Cable Test Sections

104

Coaxial Accessories

106

Specifications are subject to change without prior notice

COAXIAL COMPONENTS

Coaxial Components

RIGID LINES

FEATURES flanged / unflanged rigid lines low insertion losses low V.S.W.R indoor / outdoor applications*

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER LENGHT WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Outer conductor - Inner conductor - Insulating material TERMINATED TYPE

COAXIAL COMPONENTS

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table 0.1 ÷ 4 m (typical 4 m) See table -40 ÷ +70° C Polished Copper / Aluminium Polished Copper Teflon EIA Flanged / EIA Unflanged

* only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

RIGID LINES

EIA UNFLANGED RIGID LINES TYPE 7/8” 1-5/8” 3-1/8” 4-1/2” RL 120 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B)

Inner conductor (C/D)

WEIGHT (kg/m)

22.3 / 20 41.27 / 38.78 79.4 / 76.88 106 / 103 123 / 120 155.6 / 151.9

8.7 / 7.4 16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 52.1 / 50.1 66 / 64

10.5 11 18 18 0 26

0.33 1.83 3.75 5.6 3 9.76

COAXIAL COMPONENTS

EIA FLANGED RIGID LINES TYPE 7/8” 1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B)

Inner conductor (C/D)

WEIGHT (kg/m)

25 / 20 41.27 / 38.78 79.4 / 76.88 106 / 103 155.6 / 151.9

8.7 / 7.4 16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 66 / 64

58 89 128 159 206

2 2.7 5.2 7.9 14.5

Specifications are subject to change without prior notice

FINE MATCHERS

FEATURES flanged / unflanged fine matchers low insertion losses low V.S.W.R indoor / outdoor applications*

See table 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300 hPa (300 mBar) Polished copper, polished brass, Aluminium Silver plated brass Teflon Painted Ral 7001, Passivation SURTEC 650

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING * only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

FINE MATCHERS

figure “1”

COAXIAL COMPONENTS TYPE FMBP1-03 FMBP-03 FMBP-04 FMBPFM-03 FMBPFM-07 FMFM-03 FMFM-04 FMFM-06 FMFM-07 FMBT-03 FMBT-04 FMTV-03 FMTV-04 FMTV-06/A FMTV-07

FREQUENCY RANGE (MHz)

CONNECTORS

47 ÷ 57 66 ÷ 88 66 ÷ 88 76 ÷ 108 76 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 174 ÷ 230 174 ÷ 230 470 ÷ 860 470 ÷ 860 470 ÷ 680 470 ÷ 860

1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

figure “2”

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

1442 980 950 816 816 764 764 764 764 370 370 354 390 580 442

127.5 127.5 208.7 127.5 264.5 127.5 208.7 363 264.5 127.5 208.7 121.2 183.5 363 233.5

89 89 128 89 159 89 128 206 159 89 128 89 128 206 159

6.5 6 7.5 5 10 4 6.5 17.5 9 3.2 4 5 7.4 15 10.5

FIGURE 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2

Specifications are subject to change without prior notice

FINE MATCHERS

figure “1”

COAXIAL COMPONENTS

figure “2”

UHF 470 - 862 MHz TRIMMER LINES TYPE

CONNECTORS

FIGURE

TRIM-01 TRIM-02 TRIM-03 TRIM-04 TRIM-05 TRIM-15 TRIM-16 TRIM-08 TRIM-13 TRIM-09

NF - NF 7/16F - 7/16F NM - NF 7/16M - 7/16F 7/8” Unfl - 7/8” Unfl. 1-5/8” Unfl. - 1-5/8” Unfl. 1-5/8” Unfl. - 1-5/8” Unfl. M 3-1/8” Unfl. - 3-1/8” Unfl. 3-1/8” Unfl. - 3-1/8” Unfl. M 4-1/2” Unfl. - 4-1/2” Unfl.

1 1 1 1 2 2 2 2 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

150 162.5 150 162.5 235 348 330 371 377 377

35.5 35.5 35.5 35.5 60 60 60 142 142 199.5

32 32 32 32 58 41.3 41.3 80 80 106

0.7 0.9 0.7 0.9 1 3 3.2 5.4 5.6 8.5

Note: M = male / F = female

Specifications are subject to change without prior notice

DIRECTIONAL COUPLERS

FEATURES flanged type low insertion losses low V.S.W.R high directivity value indoor / outdoor applications*

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING FACTOR DIRECTIVITY MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS PROBE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below ≥ 40 dB See table below -40 ÷ +70° C See table below NF See table below Typical operating pressure 300 hPa (300 mBar) Nickel plated brass, polished brass Silver plated brass Teflon Painted Ral 7001

*only for waterproff and protection type

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

DIRECTIONAL COUPLERS

figure “1”

COAXIAL COMPONENTS

figure “2”

TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/W ADR-02/P ADR-02/W ADR-03/P ADR-03/W ADR-04/P ADR-04/W ADR-04/3T ADR-06/P ADR-06/W ADR-07/W ADR-07/3T ADR-08/P ADR-08/W

NF 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 6-1/8” EIA 7/16 F 7/16 M 4-1/2” EIA 4-1/2” EIA

2 2 2 2 2 2 2 3 2 2 2 3 2 2

1 1 1 1 1 2 2 2 2 2 1 1 2 2

DIMENSIONS

WEIGHT

A (mm)

B (mm)

C (mm)

(kg)

WATER PROOF

177 200 200 198 198 246 246 304 281 281 180 238 246 246

149 172 148 172 149 195 172 272 276 253 149 149 229 206

45 58 58 89 89 128 128 128 206 206 45 45 159 159

2.5 2.8 2.6 2.4 2.2 4.5 4 5 10 9.6 2.5 3.2 6 5.5

YES YES YES YES YES YES YES NO YES YES YES NO YES YES

Note: F = female / M = male Specifications are subject to change without prior notice

PROTECTION NO YES NO YES NO YES NO NO YES NO NO NO YES NO

COUPLING FACTOR (dB) FM VHF UHF min/max min/max min/max -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -67/-62 -61/-57 -49/-46 -67/-62 -61/-57 -49/-46 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -64/-59 -58/-54 -43/-46 -64/-59 -58/-54 -43/-46

FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

FEATURES unflanged directional coupler low V.S.W.R and insertion losses only for indoor applications GENERAL FEATURES FREQUENCY RANGE

COAXIAL COMPONENTS

FM band 87.5 ÷ 108 MHz (EF) VHF band 174 ÷ 254 MHz (EV) UHF band 470 ÷ 860 MHz (EU) 50 ohm ≥ 30 dB See table below ≥ 30 dB ≤ ±0.15 dB See table below -10 ÷ +45° C See table below SMA F See table below No Aluminium Silver plated brass Teflon, rexolite Surtec 650

IMPEDANCE RETURN LOSS COUPLING FACTOR DIRECTIVITY FLATNESS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS PROBE CONNECTORS WEIGHT WATERPROOF MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

figure “3”

FM Band TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/EF/n/AA ADR-01/EF/n/AA ADR-01/EF/n/AA1 ADR-01/EF/n/AA1 ADR-01/EF/n/BB ADR-01/EF/n/BB ADR-01/EF/n/BB1 ADR-01/EF/n/BB1 ADR-01/EF/n/CC ADR-01/EF/n/CC ADR-01/EF/n/CC1 ADR-01/EF/n/CC1 ADR-02/EF/n/DD ADR-02/EF/n/DD ADR-02/EF/n/DD1 ADR-02/EF/n/DD1 ADR-03/EF/n/EE ADR-03/EF/n/EE1 ADR-04/EF/n/FF ADR-04/EF/n/FF1

NF - NF NF - NF NF - NM NF - NM 7/16 F - 7/16 F 7/16 F - 7/16 F 7/16 F - 7/16 M 7/16 F - 7/16 M 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl M 7/8 Unfl F - 7/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl M 3-1/8 Unfl F - 3-1/8 Unfl F 3-1/8 Unfl F - 3-1/8 Unfl M 4-1/2 Unfl F - 4-1/2 Unfl F 4-1/2 Unfl F - 4-1/2 Unfl M

1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/4 1/4 1/4 1/4

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 3 3 3

A (mm)

B (mm)

C (mm)

WEIGHT kg (max)

105 165 123 183 102 162 111 171 138 198 128 187 170 230 190 250 160 160 184 184

104 104 104 104 104 104 104 104 104 104 104 104 119.5 119.5 119.5 119.5 110 110 151.5 151.5

50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 184 173.6 184 173.6

0.60 1.13 0.65 1.18 0.68 1.21 0.72 1.25 0.59 1.12 0.62 1.15 0.93 1.69 1.06 1.82 2.37 2.17 2.90 3.02

DIMENSIONS (max)

Note: n = nr probes F = female / M = male (*) ambient temperature 40°C Specifications are subject to change without prior notice

MAX POWER kW (*)

COUPLING FACTOR (dB) min/max

0.75 0.75 0.75 0.75 4.1 4.1 4.1 4.1 7.3 7.3 7.3 7.3 17 17 17 17 50 50 75 75

-50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -55/-75 -55/-75 -55/-75 -55/-75 -60/-80 -60/-80 -65/-85 -65/-85

COAXIAL COMPONENTS

figure “2”

figure “1”

FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

figure “3” figure “2”

figure “1”

COAXIAL COMPONENTS

VHF Band TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/EV/n/AA ADR-01/EV/n/AA ADR-01/EV/n/AA1 ADR-01/EV/n/AA1 ADR-01/EV/n/BB ADR-01/EV/n/BB ADR-01/EV/n/BB1 ADR-01/EV/n/BB1 ADR-01/EV/n/CC ADR-01/EV/n/CC ADR-01/EV/n/CC1 ADR-01/EV/n/CC1 ADR-02/EV/n/DD ADR-02/EV/n/DD ADR-02/EV/n/DD1 ADR-02/EV/n/DD1 ADR-03/EV/n/EE ADR-03/EV/n/EE1 ADR-04/EV/n/FF ADR-04/EV/n/FF1

1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/4 1/4 1/4 1/4

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 3 3 3

Note: n = nr probes F = female / M = male (*) ambient temperature 40°C

A (mm)

B (mm)

C (mm)

WEIGHT kg (max)

105 165 123 183 102 162 111 171 138 198 128 187 170 230 190 250 160 160 184 184

104 104 104 104 104 104 104 104 104 104 104 104 119.5 119.5 119.5 119.5 110 110 151.5 151.5

50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 184 173.6 184 173.6

0.60 1.13 0.65 1.18 0.68 1.21 0.72 1.25 0.59 1.12 0.62 1.15 0.93 1.69 1.06 1.82 2.37 2.17 2.90 3.02

DIMENSIONS (max)

Specifications are subject to change without prior notice

MAX POWER kW (*)

COUPLING FACTOR (dB) min/max

0.52 0.52 0.52 0.52 2.8 2.8 2.8 2.8 5 5 5 5 11.6 11.6 11.6 11.6 33 33 52 52

-45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -50/-70 -50/-70 -50/-70 -50/-70 -55/-75 -55/-75 -60/-80 -60/-80

FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

figure “3”

UHF Band TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/EU/n/AA ADR-01/EU/n/AA ADR-01/EU/n/AA1 ADR-01/EU/n/AA1 ADR-01/EU/n/BB ADR-01/EU/n/BB ADR-01/EU/n/BB1 ADR-01/EU/n/BB1 ADR-01/EU/n/CC ADR-01/EU/n/CC ADR-01/EU/n/CC1 ADR-01/EU/n/CC1 ADR-02/EU/n/DD ADR-02/EU/n/DD ADR-02/EU/n/DD1 ADR-02/EU/n/DD1 ADR-03/EU/n/EE ADR-03/EU/n/EE1 ADR-04/EU/n/FF ADR-04/EU/n/FF1

1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/4 1/4 1/4 1/4

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 3 3 3

Note: n = nr probes F = female / M = male (*) ambient temperature 40°C

A (mm)

B (mm)

C (mm)

WEIGHT kg (max)

105 165 123 183 102 162 111 171 138 198 128 187 170 230 190 250 160 160 184 184

104 104 104 104 104 104 104 104 104 104 104 104 119.5 119.5 119.5 119.5 110 110 151.5 151.5

50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 184 173.6 184 173.6

0.60 1.13 0.65 1.18 0.68 1.21 0.72 1.25 0.59 1.12 0.62 1.15 0.93 1.69 1.06 1.82 2.37 2.17 2.90 3.02

DIMENSIONS (max)

Specifications are subject to change without prior notice

DTV MAX POWER kW (*)

ATV MAX POWER kW (*)

COUPLING FACTOR (dB) min/max

0.26 0.26 0.26 0.26 1.4 1.4 1.4 1.4 2.5 2.5 2.5 2.5 6.0 6.0 6.0 6.0 20 20 30 30

0.39 0.39 0.39 0.39 2.1 2.1 2.1 2.1 3.7 3.7 3.7 3.7 9.0 9.0 9.0 9.0 30 30 45 45

-35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -40/-60 -40/-60 -40/-60 -40/-60 -45/-65 -45/-65 -50/-70 -50/-70

COAXIAL COMPONENTS

figure “2”

figure “1”

COAXIAL ELBOWS

FEATURES flanged / unflanged coaxial elbows low insertion losses low V.S.W.R indoor / outdoor applications*

COAXIAL COMPONENTS

0.1 ÷ 860 MHz ** 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300hPa (300mBar) Polished copper, polished brass, Aluminium Silver plated brass Teflon Painted Ral 7001, Nickel plating, Passivation SURTEC 650

* only for flanged types ** up to 790 MHz for 6-1/8”

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL ELBOWS

figure “1”

TYPE

CONNECTORS

FIGURE

GMT-01 GMT-01/CP* GMT-03 GMT-04 GMT-05 GMT-06 GMT-07 GMT-10 GMT-17 GMT-11 GMT-12 GMT-15 GMT-16 GMT-18

7/8” EIA 7/8” EIA 1-5/8” EIA M-F 1-5/8” EIA 3-1/8” EIA 4-1/8” FL 6-1/8” EIA 4-1/2” EIA 7/8” Unfl. M 1-5/8” Unfl. M 3-1/8” Unfl. M 6-1/8” Unfl. M 4-1/2” Unfl. M RL 120 Unfl. M

2 4 3 2 2 2 2 2 1 1 1 1 1 1

DIMENSIONS

WEIGHT

A (mm)

B (mm)

C (mm)

D (mm)

(kg)

55 55 65 65 85 100 130 100 18.7 38.4 59.5 89.5 79.5 85

84 84 110 110 149 180 233 179.5 35 60 89 140 109 115

58 58 89 89 128 160 206 159 32 48 90 170 120 130

149 62.3 98.4 149 256.5 184.3 218

0.62 0.72 1.4 1.3 2.9 4 9.1 4.4 0.12 0.4 2.1 6.7 3.5 3.4

figure “3”

figure “4”

Note: F = female / M = male * with Capacitive Probe

Specifications are subject to change without prior notice

COAXIAL COMPONENTS

figure “2”

COAXIAL ADAPTORS

FEATURES flanged / unflanged coaxial elbows low insertion losses low V.S.W.R indoor / outdoor applications GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION *

COAXIAL COMPONENTS

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Typical operating pressure 300 hPa (300 mbar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING * only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size

Specifications are subject to change without prior notice

100

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL ADAPTORS

figure “1”

figure “2”

FLANGED COAXIAL ADAPTORS

TRS-01 TRS-02 TRS-03 TRS-04 TRS-05 TRS-06 TRS-07 TRS-08 TRS-11 TRS-12 TRS-13 TRS-14 TRS-15 TRS-16 TRS-17 TRS-19 TRS-22 TRS-26 TRS-27 TRS-36 TRS-37 TRS-39 TRS-40 TRS-41 TRS-42 TRS-44 TRS-45 TRS-46

CONNECTORS 7/16 F 7/16 M 7/8” EIA M 7/8” EIA M 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA M 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 3-1/8” EIA 4-1/2” EIA 6-1/8” EIA 4-1/2” EIA 4-1/2” EIA 1-5/8” EIA M 6-1/8” EIA 4-1/2” EIA 6-1/8” EIA 3-1/8” EIA 1-5/8” EIA

FIGURE

NF NF NF NM NF NM 7/16 F 7/16 M NF NM 7/16 F 7/16 M 7/8” EIA 7/8” EIA 1-5/8” EIA NF 3-1/8” EIA 7/8” EIA 4-1/8” FL M NF 3-1/8” EIA NF 7/8” EIA 4-1/2” EIA 3-1/8” EIA 7/16 F 7/16 F Dezifix D

6 6 5 5 4 4 3 3 4 4 4 4 1 2 1 4 1 1 2 4 1 4 2 1 1 4 4 3

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

45 59 42.5 39 83.5 80 63.5 66 123.5 120 111 125 83.5 60 110 162 150 120 65 207 95 150 21 150 117 194.5 149.5 138.5

32 35 58 58 58 58 58 58 89 89 89 89 89 89 128 128 150 128 159 206 159 159 89 206 159 206 128 98

0.14 0.19 0.3 0.32 0.3 0.36 0.2 0.28 1 1 1 1 0.77 0.85 1.5 3 3.8 1.3 2.6 6.4 3 3.5 0.65 4.5 2.5 4.8 3 2.6

Note: F = female / M = male

Specifications are subject to change without prior notice

101

figure “3”

figure “4”

figure “5”

figure “6”

COAXIAL COMPONENTS

TYPE

COAXIAL ADAPTORS

figure “7”

figure “8”

figure “9”

COAXIAL COMPONENTS

UNFLANGED COAXIAL ADAPTORS TYPE TRS-11/U TRS-12/U TRS-13/U TRS-14/U TRS-16/U TRS-17/U TRS-19/U TRS-22/U TRS-26/U TRS-27/U TRS-38/U TRS-41/U TRS-42/U TRS-43/U TRS-47/U TRS-48/U

CONNECTORS 1-5/8” Unfl. M 1-5/8” Unfl. M 1-5/8” Unfl. M 1-5/8” Unfl. M 1-5/8” Unfl. M 3-1/8” Unfl. M 3-1/8” Unfl. M 6-1/8” Unfl. M 3-1/8” Unfl. M 4-1/2” Unfl. M 6-1/8” Unfl. M 6-1/8” Unfl. M 4-1/2” Unfl. M 4-1/2” Unfl. M 4-1/2” Unfl. M 4-1/2” Unfl. M

FIGURE

NF NM 7/16 F 7/16 M 7/8” EIA 1-5/8” Unfl. M NF 3-1/8” Unfl. M 7/8” EIA 4-1/8 FL 1-5/8” Unfl. M 4-1/2” Unfl. M 3-1/8” Unfl. M 4-1/8” Unfl. M 7/8” EIA 4-1/2” EIA

9 9 9 9 8 7 9 7 8 8 7 7 7 7 8 8

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

103 99.5 56.4 104 115 124.5 104 177 101 45 152.5 153 145 119 103 149

57.5 57.5 45 57.5 58 100 100 177 100 159 177 177 127 127 127 159

0.3 0.33 0.25 0.35 0.5 1 1 3.5 1 1.2 3 3.3 1.8 1.8 1.4 2

Note: F = female / M = male

Specifications are subject to change without prior notice

102

FM 3dB COUPLERS

FEATURES

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING ISOLATION PHASE DIFFERENCE BETWEEN THE OUTPUTS MAX MEAN POWER * OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB 3 ± 0.1dB ≥ 32 dB 90° ± 1° See table below -40 ÷ +70° C See table below See table below No Brass and aluminium Silver plated brass, polished brass silver plated aluminium deoxidized aluminium Teflon Painted Ral 9005, Surtec 650

- Insulator EXTERNAL FINISHING

figure “1”

* at 108MHz, V.S.W.R. =1.0, Atmospheric Pressure, Dry Air, ambient temperature 40°C, Inner conductor temperature 120°C

TYPE

IFM-01XR

IFM-02XR IFM-03XR IFM-03X IFM-04X IFM-07X IFM-06X

CONNECTORS NF 7/16 F 7/8” Unfl. F NF 7/16 F 7/8” Unfl. F 1-5/8” Unfl. F 1-5/8” Unfl. F 3-1/8” Unfl. F 4-1/2” Unfl. F 6-1/8” Unfl. F

FIGURE

1 1 2 2 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

D (mm)

90 90 90 252 252 252 252 752.5 752.5 752.5 752.5

192 185 222 370 363 400 444 864 881.5 930 990

499.4 500.8 519.3 444.3 445.7 464.2 477 222.4 233.9 271.6 357

45 45 45 49 49 49 84 85 124 150 208

WEIGHT MAX MEAN (kg) POWER (kW) 2.7 2.7 2.8 4 4 4.1 6.4 4.8 10 16 31

0.75 4 5 0.75 4 7 17 17 50 75 160

Note: F = female

Specifications are subject to change without prior notice

103

figure “2”

COAXIAL COMPONENTS

flanged / unflanged type low insertion losses low V.S.W.R indoor applications

CABLE TEST SECTIONS

FEATURES direct antenna system VSWR testing quick and accurate measurements low V.S.W.R suitable for outdoor applications*

COAXIAL COMPONENTS

See table 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300 hPa (300 mBar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001

* only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

104

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

CABLE TEST SECTIONS

COAXIAL COMPONENTS

figure “1”

TYPE

FREQUENCY RANGE (MHz)

CONNECTORS

FIGURE

PCM-04

up to 860

1-5/8” EIA

PCM-14

up to 860

PCM-24

DIMENSIONS

WEIGHT

A (mm)

B (mm)

C (mm)

(kg)

300

145

3-1/8” EIA

350

184

128

up to 860

4-1/2” EIA

430

208

159

PCM-25/V

174 ÷ 230

6-1/8” EIA

580

268

206

PCM-25/U

470 ÷ 860

6-1/8” EIA

580

268

206

Specifications are subject to change without prior notice

105

INSERT SECTION 1-5/8” - NF 1-5/8” - 7/16 F 3-1/8” - NF 3-1/8” - 7/16 F 4-1/2” - NF 4-1/2” - 7/16 F 6-1/8” - NF 6-1/8” - 7/16 F 6-1/8” - NF 6-1/8” - 7/16 F

COAXIAL ACCESSORIES

FEATURES flanged / unflanged coaxial accessories low insertion losses low V.S.W.R indoor / outdoor applications

COAXIAL COMPONENTS

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Polished copper, polished brass, Aluminium Silver plated brass Teflon Nickel plating, Passivation SURTEC 650

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

3-1/8”

1-5/8”

7/8” 7/16

1 0.5

0.2

N 40

VHF-BI

100

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

106

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL ACCESSORIES

BULLETS DIMENSIONS TYPE

CONNECTORS

INN-01 INN-02 INN-03 INN-07 INN-05

7/8” 1-5/8” 3-1/8” 4-1/2” 6-1/8”

WEIGHT

A (mm)

B (mm)

(kg)

59.8 78.4 100 10 125

20.65 41.75 81.2 105.3 154

0.02 0.1 0.3 0.6 1.3

GAS BARRIERS CONNECTORS

BAR-01 BAR-02 BAR-03 BAR-04 BAR-05

7/8” EIA M 1-5/8”EIA M 3-1/8”EIA M 4-1/2”EIA M 6-1/8”EIA M

WEIGHT

A (mm)

B (mm)

(kg)

30 30 35 40 40

58 89 128 159 206

0.6 1.3 2.7 4.3 8.5

CLAMP FLANGE DIMENSIONS TYPE

CONNECTORS

FLN-33 FLN-01 FLN-02 FLN-10 FLN-27

7/8” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

WEIGHT

A (mm)

B (mm)

(kg)

29 41 42 64 35.5

58 89 128 206 159

0.2 0.5 0.9 2 1.2

STRAIGHT COUPLINGS DIMENSIONS TYPE

CONNECTORS

FLN-31 FLN-03 FLN-04 FLN-09 FLN-28 FLN-35

7/8” Unfl. M 1-5/8” Unfl. M 3-1/8” Unfl. M 6-1/8” Unfl. M 4-1/2” Unfl. M RL 120 Unfl. M

WEIGHT

A (mm)

B (mm)

(kg)

47 78.4 100 95 71.6 70

30 60 100 177 127 142

0.15 0.3 0.81 2.2 0.9 1.1

Note: M = male

Specifications are subject to change without prior notice

107

COAXIAL COMPONENTS

DIMENSIONS TYPE

NOTES