Gridswitch Dimmer Modules
• Standard Dimmers suitable for incandescent lamps and low voltage lighting • LED Dimmer suitable for LED lamps requiring leading or trailing edge control
• G3604 is for dimming HF ballasts with 1-10V dimming control. A separate 20A switch is required to switch the ballasts • Push on/push off control
• G3521 400W dimmer consists of two separate modules allowing greater flexibility
• 40mm minimum deep back box recommended
• G3524 dimmer takes two module spaces and a blank will be required
• In compliance with BS EN 60669-2-1 • 2-year guarantee
LED Dimmers White G3523** 1 Module 2-way - 100W Black G3523BK** 1 Module 2-way - 100W Standard Dimmers White G3521 2 Module 2-way - 60-400W G3522 1 Module 2-way - 40-250W G3524 1 Module 2-way - 75-700W G3604 1 Module 2-way - 1-10V control
G3523
G3523BK
Black G3521BK 2 Module 2-way - 60-400W G3522BK 1 Module 2-way - 40-250W
G3522
G3521
G3521 400W Dimmer Module The 400W dimmer module consists of two separate modules that are linked together. This offers maximum flexibility of the dimmer fitting into all frontplates from 2g up to 24g, including 3g, 6g and 9g. Also, the dimmer control part can be positioned beside, above or below the coil module.
92
Technical Hotline 01582 544 548
**Available October 2015
Dimmer Modules The quantity and maximum rating of dimmers fitted into a frontplate has to be limited to allow for heat disipation. Contact Technical Hotline for further information.