i. Type I Single-Family Dwellings 50% of the site area for subdivision; ii. Type II Single-Family Dwellings and Duplexes 70% of the site area for subdivision; iii. Type III Ground-Oriented Multiple-Unit Residential Buildings 80% of the site area for subdivision; iv. Type IV Mixed-Use Residential/Commercial 80% of the site area for subdivision. v. A combination of Types I, II, and III above 50% to 80% of the site area for subdivision. b. the said open space shall contain natural features such as a watercourse, grasslands, stands of mature trees, or other land forms worthy of preservation, and/or contain heritage buildings or features, and/or contribute to a park designated in the Official Community Plan; and c. the said open space shall be accessible by the public from a highway. 3. Undevelopable areas may be included in the open space set aside in subsection 2(a). 4. a. For the purpose of this section and notwithstanding the definition of floor area ratio (FAR) in Part 1 Definitions of this bylaw, all covered areas used for parking shall be included in the calculation of floor area ratio unless the covered parking is located within the basement; and b. For building construction within a lot created under this zone, the maximum floor area ratio shall be as follows: i. Type I Single-Family Dwellings 0.45 ii. Type II Single-Family Dwellings and Duplexes 0.50 iii. Type III Ground-Oriented Multiple-Unit Residential Buildings 0.50 iv. Type IV Mixed-Use Residential/Commercial 0.50
183
Green Bylaws Toolkit 2016