How to Reset an Acer eRecovery Password?
Acer eRecovery management or Acer eRecovery manager is software produced by the Acer Corporation to help its user to restore their default factory setting. Its fast, reliable and safe method makes it the most widely used across the world these days. This utility is restored in a hidden part of the hard disk of the computer so it can be fetched and utilized from there. Acer eRecovery restores the good configuration images from the secondary partition or an optical disk. It also contains backup recovery, so you can use to backup data from your hard drive disk or other removable media. Acer eRecovery needs you to use default password “000000” until you select the new password. However, if you forget or lose it, then there is a way to recover it.
So here Acer Support Australia provides you with a complete solution by which you can readily accomplish this task. Just you need to go through the procedure; 1. Locate and Unhide Hidden Rescue Partition. ➢ You need to access “Diskpart command prompt”. For this click on the “start” button and type “cmd” in the search bar to bring up the black command prompt box, ➢ Now switch to the Diskpart prompt by typing “Diskpart” at the prompt. Doing this you can access PQ service. Acer stores your password In PQ Service. ➢ Type “rescan” at the Diskpart prompt, it will run a system configuration check and scan your computer configuration. ➢ You will receive a message once it finished the scan. Now at the command prompt type “list disk”, it will bring out available disks then type “select disk 0”.
➢ Type “list partition” at the command prompt. It will view the list of partition on your disk. Locate the partition by typing “select partition (number)”. ➢ Determine the type and unhide the partition. ➢ Type “select disk 0” to return the disk containing PQ service. 2. Reset eRecovery password. ➢ Open the PQ service and go to the drive containing PQ service. Enter “aimdrs” to find the file in the search box. ➢ Select the file, right click on it and then open. You can open with any text editor. ➢ Open the file and locate the recovery password. ➢ Now open recovery using the recovered password and follow the instruction to create the new one. Our experts tried to make this process very simple. However, it doesn’t give you full assurance to accomplish this task. There might be some error in case of some other issue you face with this application. Therefore it is always better to get in touch with the experts. So feel free to contact our experts via toll-free Acer Support Number Australia . They will not only help you in this issue but also provide you with a well-described solution in some other similar issue. Original Source:- How to Reset an Acer eRecovery Password?