Beverly 250 USA
Engine
Removing the driven pulley shaft bearing - Remove the clip from the inside of the cover. - Remove the bearing from the crankcase by means of:
Specific tooling 020376Y Adaptor handle 020375Y Adaptor 28 x 30 mm 020412Y 15 mm guide
Refitting the driven pulley shaft bearing - Slightly heat the crankcase from the inside so as not to damage the painted surface. - Insert the bearing in its seat. - Refit the Seeger ring. CAUTION
USE AN APPROPRIATE REST SURFACE TO AVOID DAMAGING THE COVER PAINT. N.B.
ALWAYS REPLACE THE BEARING WITH A NEW ONE UPON REFITTING.
Specific tooling 020376Y Adaptor handle 020357Y 32 x 35 mm adaptor 020412Y 15 mm guide
Baffle roller Removal Belt support roller (200 cm続 models only) - Check that the roller does not show signs of wear and that it turns freely. - Remove the special fixing screw and the roller together with the bearing.
ENG - 3