CHASSIS
Pegaso 650 I.E.
7.3.13 DISASSEMBLING THE REAR WHEEL BEARINGS Carefully read 0.5.1 (PRECAUTIONS AND GENERAL INFORMATIONS). ◆ Remove the rear wheel, see 7.3.1 (REMOVING THE
REAR WHEEL). ◆ Use a cloth to clean both sides of the hub.
Work from the right-hand side of the wheel:
NOTE Have the appropriate special tool m to hand: – aprilia part# 8140180 (Kit for bearings in the range Ø10 mm to Ø 30 mm). ◆ Use a special extractor to extract the right bearing (1). ◆ Retrieve the inner spacer (2).
Work from the left-hand side of the wheel: ◆ Remove the left spacer (3). ◆ Remove the seal (4). ◆ Remove the snap ring (5).
NOTE The elastic ring (5) is provided only on the left side of the wheel.
NOTE Have the appropriate special tool m to hand: – aprilia part# 8140180 (Kit for bearings in the range Ø10 mm to Ø 30 mm). ◆ Use a special extractor to extract the left bearing (6). ◆ Thoroughly clean the inside of the hub.
NOTE Wash
all the components with a clean deter-
gent.
7 - 50 - 00
Release 00/2002-02