CHASSIS
Pegaso 650 I.E. 7.1.27 REMOVING THE DASHBOARD FAIRING Carefully read 0.5.1 (PRECAUTIONS AND GENERAL INFORMATIONS). ◆ Position the vehicle on the stand. ~ Unscrew and remove the screw (1).
Dashboard fairing lower screw driving torque: 25 Nm (2.5 kgm). ~ Unscrew and remove the screw (2). Fairing side screw driving torque: 1.5 Nm (0.15 kgm). ~ Retrieve the special nut (3). ◆ Unscrew and remove the screw (4). Dashboard fairing upper screw driving torque: 25 Nm (2.5 kgm).
aCAUTION Handle the painted components with care and avoid scraping or damaging them.
NOTE Remove the dashboard fairing (5), by raising it.
7.1.28 REMOVING THE DASHBOARD MOUNT Carefully read 0.5.1 (PRECAUTIONS AND GENERAL INFORMATIONS). ◆ Remove the dashboard, see 7.1.26 (REMOVING THE DASHBOARD).
aCAUTION Upon reassembly, place the cables and the clamps in the same position. ◆ Release the cables from all the fastening clamps (six).
NOTE Prepare the same number of clamps, which will be required for reassembly. ◆ Disconnect the six electric connectors (6). ◆ Withdraw the high beam relay (7) from its coupling. ◆ Withdraw the blinking unit (8) from its coupling. ◆ Unscrew and remove the screw (9), releasing the sup-
port (10) of the electric connectors. ◆ Loosen and remove the two nuts (11) and withdraw the
relevant screws from the opposite side. Dashboard mount screw-nut driving torque: 12 Nm (1.2 kgm). ◆ Remove the dashboard mount (12).
Release 00/2002-02
7 - 23 - 00