CHASSIS
Pegaso 650 I.E.
7.1.15 REMOVING THE CLUTCH LEVER Carefully read 0.5.1 (PRECAUTIONS AND GENERAL INFORMATIONS). COMPLETE REMOVAL ◆ Remove the left hand guards, see 7.1.13 (REMOVING
THE HAND GUARDS). ◆ Withdraw the protection element (1). ◆ Loosen the ring nut (2). ◆ Screw the adjuster (3) completely. ◆ Make the slots (4) (5) (6) coincide.
aCAUTION Let the engine cool down until it reaches room temperature. ◆ Release the clutch cable (6) (engine side) from the cou-
pling (7). ◆ Disengage the clutch cable (8) from the clutch lever (9). ◆ Unscrew and remove the safety switch (10).
NOTE Before removing the U bolt (11), mark its position on the handlebar so it can be refitted in the right place. ◆ Unscrew and remove the two screws (12).
U-bolt screw driving torque: 10 Nm (1.0 kgm). ◆ Remove the U-bolt (11) (complete with rear-view mir-
ror) and take the clutch control (13). PARTIAL REMOVAL
NOTE Before removing the U bolt (11), mark its position on the handlebar so it can be refitted in the right place. ◆ Unscrew and remove the two screws (12).
U-bolt screw driving torque: 10 Nm (1.0 kgm). ◆ Remove the U-bolt (11), complete with rear-view mir-
ror.
aCAUTION Do not force pipes and cables. ◆ Partially remove the clutch control (13), complete with
hand guard.
7 - 14 - 00
Release 00/2002-02