Salomon Alpine Tech Manual 2018/19

Page 114

boot concepts >>>

S/Max

BOOTSOLES ON S/MAX 120 – 110 – 100

SENSE STRAP

Bootsoles are removable and should be replaced if excessively worn and/or damaged. Salomon guarantees bootsoles for their disassembling and reassembling, up to a maximum of 5 times subject to strict compliance with the following instructions: • Use only a manual screw driver • Unscrew the 9 screws and remove them from the bootsole. • Remove the rear and front sole. • Push them forward towards the front of the shell and rescrew until you feel an increased resistance in the torque to reach a torque value about 1Nm.

Sense strap allow to adjust and manage boot sensations:

BOOSTER FLEX

BOOT

Booster flex allows: - Increases the junction between cuff & shell for flex management in a forward position : entering the curve, increasing power on skis. - Provide support and power to skiers in a rear position while getting out of the curve (rebound effect): the more powerful the rebound the more back support you need to control your skis. Out of the box, booster flex is adjusted on hard position. To soften the boot, unscrew torx T20 screw, inverse booster flex position and screw it again.

114


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.