Boot
BOOT CONCEPTS
QUEST PRO 1
TECHNICAL DESCRIPTION QUEST PRO 110 1- My CustomFit 3D Pro liner 2- Articulated sensifit 3- Micro alu buckle 4- 24mm oversized pivot 5- PU lower shell and PP cuff FEATURES ACCORDING TO DIFFERENT MODELS
2
5
4
3
ADJUSTMENTS AND PERSONALIZATION 3D BUCKLE (fig. 1) The 3D buckle adjustment allows the position of the instep buckle to be changed for personalised foot hold: - Unscrew the buckle with a 3 mm Allen wrench. - Position the buckle over the plastic lug on the shell. - Tighten in the alternate position.
CANTABLE ALPINE PADS Available as spare part, cantable alpine pads are compatible with following models : XPro / Quest Max / Quest / Quest Access / Ghost Max. Warning : cantable alpine pads are not compliant to ISO 5355 and must be grinding before using to reach the norm. Grinding should be done as well on top and on at the bottom of the alpine pad with the same angle in order to guarantee surfaces parallelism (fig. 2). Grinding on top and bottom surface should not go over the reference line marked on ca table alpine pads which allow an angle from 0 to 1,5째 (fig. 3).
2
1
Top pad grinding (not over reference line taht is to say 1,5째 maximum)
LINER QUEST PRO TR this liner is not a full thermo liner like Quest Max BC liner. Operating mode for this liner is the same as a traditional CustomFit liner using thermoforming machine. REAR SPOILER (fig. 4) A rear calf is available in the box or as spare part (according to different level). This calf increases rear support and forward lean by +2째. It should be fixed on the liner scratch area.
4 Bottom pad grinding (parallel to top grinding
3
70
MAX 2 MM TO GRIND
MAX 2 MM TO GRIND
NO GRINDING
NO GRINDING
MAX 2 MM TO GRIND
MAX 2 MM TO GRIND
summary <<<