How To Clean Car Battery Terminals - Auto Repair Services Jacksonville FL
Over time, the battery terminals of our vehicle become unsightly or cause proper contact with the battery. This is usually because the metal terminals become sulfated. C&L Auto repair shop in Jacksonville FL automobile experts will show you how to clean the terminals of the car battery.
Cleaning Battery Terminals of the Car: Step 1: A battery terminal with dirt or sulfated may hinder or even prevent your car to boot. The first thing you do is to turn the engine off. Take a look at the battery terminals to confirm if they are sulfated or dirty. Sulfation is seen when the metal becomes blue or green. Step 2:
Loosen the screws or nuts holding the battery cables with a screwdriver or a wrench, starting with the negative lead. Do the same with the right terminal. Distance the metal wires and avoid the two come into contact. Step 3: To remove the crust of dirt or sulfation from the terminals, use a container with water and a few tablespoons of baking soda. Another alternative is to use cola, especially of the leading brands. You should take a jet of this solution on the battery and let it stay for a few seconds for the reaction to take place. Then use a cloth to clean the remains off the terminals. Step 4: Once dry, rub the terminals with wire brush. You can top it off with sandpaper. With another damp cloth, remove the remains. Step 5: Before attaching the cables back, apply a thin layer of petroleum jelly or grease on the terminals to prevent them from leakage. You must remember to keep a wrench or screwdriver, a wire brush, container with 500 ml of water and 2 tablespoons of baking soda or cola and rags with you while carrying out the process. In case you are having trouble doing the task yourself, come to C&L Auto repair workshop in Jacksonville FL