ADVANCE DESIGN TUTORIAL
–
In the “Vector” category, click
. Specify graphically the copy vector by snapping to the top extremities of
the A1 and C1 columns, as in the following sequence of images:
Figure 37: Defining the longitudinal beams copy vector
5.
Click Preview to see how the settings are applied.
Figure 38: The longitudinal beams
6.
Click Copy and close the dialog box.
7.
Press <Esc> to unselect the beams.
Creating walls Since the GroundFloor system coordinates are defined (Z top = 3.20 m, Z bottom = 0.00 m), it is possible to create walls by two points, snapping automatically to the specified coordinates. 1.
In the Pilot, select the Walls subsystem.
2.
On the Modeling toolbar, on the Create a planar element flyout, click
to create a vertical planar element by 2 points.
Figure 39: Modeling toolbar, create a planar element flyout – creating a vertical planar element by 2 points
20