19 est security enclosure eng

E.S.T. SECURITY ENCLOSURE

TECHNICAL FEATURES OUTSTANDING ·· ·· ··

POSTS AND MESH

High security post and frame system High resistance security system Exceptional life thanks to the anticorrosion coating

·· Machining poles of 100x4 (W= 27,82 cm3), with all the needed components to incorporate and tighten the Chain Link mail. The mechanical features of the tubes follow UNE-19-011-86 standards ·· Crossbeams Ø100x4mm placed 3m above ground level and double crossbeam placed at 6m above ground level at the tightening poles ·· For those enclosures equipped with microphone wire we recommend installing the plastic coating finishing (galvanized + plastic coating)

POLE ENCLOSURE NOMINAL HEIGHT 5m00+0m50

LENGTH

SECTION

5m00+0m50

100x4mm

MESH

FINISHING

BAYONET*

TYPE

FINISHING

length 0m50

50/16 2,7mm

Galvanized 6m00+0m50

6m00+0m50

100x4mm

COMBINED MESH HEIGHT 3m00+2m00

Galvanized length 0m50

50/16 2,7mm

2m00+2m00+2m00

*Available on certain enclosures

ANTICORROSION COATING

APPLICATION PLACES

All the materials of the Defece Plus fence are hot dip galvanised: ·· Minimum thickness: 100 microns

GALVANIZED STEEL

·· Colour: Airports

90

Prisons

Military areas

Power station

Personal control

Hangars

Harbours

hot dipped galvanised

91

ASSEMBLY DETAIL OF TENSION POLE

BAYONET

1

DETAIL OF BAYONET 2

1

2

3

E.S.T. SECURITY

ASSEMBLING CONCERTINA ON A CONCRETE WALL A concrete wall may be added to the High Security System. A double concertina can be installed to increase the security.

TENSIÓN POLE

1. 100X4mm POLE 2. Ø100X4mm CROSSBAR TUBE

1. BARBWIRE 2. SIMPLE “T“ PROFILE 3. HARPOON

Enclosure built with 100x4 diameter poles and chain link mail of 50/16. Intermediate poles are placed every 2m50. Six lines of tightening wire nº16 should be also installed.

OPTION 2: ANTI-CLIMB MESH

ASSEMBLING OPTIONS There are several ways of installing the enclosure, adding complementary elements that will increase the efficacy and protection of the system.

ANTI-CLIMB MESH

OPTION 1. ASSEMBLING CONCERTINA

The anti-climb mail is a perfect complement for this system. It prevents intruders from introducing their feet or fingers trough the Chain Link Mail. In penitentiaries it’s recommended to an install anti-climb mail of 10x10x0,8mm. In reformatories it’s recommended to install an anti-climb mail of 6x6x0,8mm.

Concertina is the perfect complement for the Security Perimeter Protection. It dissuades any trespassing attempt. Rivisa recommends using Harpoon type concertina, with a diameter of 600x50mm, finished in galvanized stainless steel.

Different combinations are available.

HARPOON TYPE CONCERTINA THICKNESS

Ø WIRE

BLADE LENGTH

BLADE WIDTH

DISTANCE BETWEEN BLADES

0,6 ±0,05mm

2,5 ±0,1mm

65 ±2mm

21 ±1mm

100 ±2mm

ANTI-CLIMB MAIL

OPTION 3: BARBWIRE Barbwire is the perfect complement for medium and high security enclosures.

It grants a better security of the perimeter. 3 or 4 lines of barb wire can be installed.

CONCERTINA FEATURES Reinforced stainless steel blades are a very aggressive product.

The blades are designed in order to improve the anchoring effect in situations where a maximum security is needed.

LAME

TECHNICAL FEATURES

GALVANIZED HIGH TENSION WIRE Ø2,5mm

TYPE

FINISHING

DISTANCE BETWEEN THORNS

Nº THORNS

Ø WIRE

ESPINO 4 / 1,7 / 15 G (D-176)

Galvanized*

15cm

4

1,7mm

Laminated

15cm

4

1,60/2,40mm

ESPINO 15 / 15 PV OPTION 1

92

HIGH RESISTANCE STEEL WIRE

OPTION 2

OPTION 3

OPTION 4

*Galvanized features: 60gr/m

2

93