Product Catalogue
90 years of proven experience Discover more of our products at: www.bmv.dk
90 years of proven experience Discover more of our products at: www.bmv.dk
Index HIGH PRESSURE CYLINDER VALVES
FILL CONNECTORS
552
VALVE FOR REFRIGERANT GASES
431
FILL CONNECTOR
535
PIN INDEX VALVE WITH RPV
431
ANGLE FILL CONNECTOR
431
ANGLE HANDWHEEL CONNECTOR
431
ANGLE/SWIVEL CONNECTOR
518 OFF-LINE HIGH-PRESSURE CYLINDER VALVE 512 OFF-LINE HIGH-PRESSURE CYLINDER VALVE 451 IN-LINE HIGH-PRESSURE CYLINDER VALVE 435
PIN INDEX VALVE
418 IN-LINE HIGH-PRESSURE CYLINDER VALVE 126/127 LIGHT WEIGHT AND SMALL VALVE FOR 5L CYLINDERS VIPR VALVES 618
VIPR OXYGEN
618
VIPR INERT
618
VIPR ACETYLENE
618
PROTECTIVE GUARD
618
PROTECTIVE GUARD (Ø 198)
617 VIPR VALVE - OXYGEN COMPACT LIGHT WEIGHT 617 VIPR VALVE - INERT COMPACT LIGHT WEIGHT 617 VIPR VALVE - ACETYLENE COMPACT LIGHT WEIGHT 616 HIGH FLOW PRESSURE REDUCTION VALVE 616 BI-DIRECTIONAL PRESSURE REDUCTION VALVE FIRE SUPPRESSION VALVES 580 FIRE SUPPRESSION VALVE PNEUMATICALLY OPERATED 580 MGE ELECTRICA /PNEUMATICALLY OPERATED FIRE SUPPRESSION VALVE
90 years of proven experience Discover more of our products at: www.bmv.dk
LOW PRESSURE REGULATORS 047 BUDGET REGULATOR FOR GAS CYLINDERS 447
BUDGET REGULATOR
056
AUTOMATIC CHANGE-OVER DEVICE
057/058 SINGLE STAGE REGULATOR WITH FL ANGE CONNECTION 070/071 SINGLE STAGE REGULATOR WITH HOSE CONNECTION 160 ADJUSTABLE REGULATOR FOR HIGH CAPACITY 457/458 TWO STAGE REGULATOR 554-1 REGULATOR COMBINATION 554 WITH OPSO AND PRV FOR GAS TANK APPLICATION 554-2 MIDDLE RANGE PRESSURE REGULATOR COMBINATION 554 WITH OPSO AND PRV 554-3 LOW PRESSURE REGULATOR COMBINATION 554 WITH OPSO AND PRV OR DOUBLE DIAPHRAGM 555
HIGH CAPACITY LPG REGULATOR
744
PRESSURE RELIEF VALVE
858/859 REGULATOR WITH OPSO 865 OVER-PRESSURE SHUT OFF SAFETY DEVICE
552
Valve for refrigerant gases TECHNICAL SPECIFICATIONS: • Design with dual inlet connections, one for liquid phase and the other for gas phase. The inlet connection for the liquid phase is intended for fitting of a dip tube • Two sealing systems, one for each gas phase • One or two outlets as option • Provision of either a safety valve or a burst disc • Suitable for use without a permanent protection guard for a total package weight not exceeding 50 kg • Handwheel can be designed to fit under a standard DIN protection guard • Outlet seal nut and dip tube are optional For further technical specifications on this valve please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
552 Valve for refrigerant gases About this valve The Müller type 552 refrigerant valve for industrial use offers a new innovative design. It is a small and compact solution with multiple characteristics. The valve can be provided with one or two outlets for either gas or liquid phase, the consumption of which is operated by the handwheels. The handwheel can be designed to allow the valve to fit under a DIN protection guard. Handwheel colour and logo can be supplied as per customer request. The valve is manufactured on state-of-the-art machinery, and the quality is monitored throughout the entire process. The valve is subjected to a 100% functional test on the assembly line ensuring a safe and reliable high-quality product.
BAM Approved: EN ISO 10297 Approved test pressure: 250 bar Inlet connection: 25 E, or other on request Available for the following gases: CO2 R12, R22, R114 & R134a R14, R116 or other on request Filling connection: to customer specification Burst disc / safety valve: According to gas type Valve weight: 0,9 kg. Gas phase: Blue handwheel or other on request Liquid phase: Red handwheel or other on request
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 or e-mail: info@bmv.dk
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
EC Type-Examinations and QS Certification by:
BAM-TPED-QS-2009/001
001PRO88_rev1 - © www.reklamehuset.dk
535
Pin Index Valve with RPV RPV / MPR - NEW IMPROVED DESIGN 1. Improved lifetime on the RPV unit, reducing maintenance costs 2. RPV noise level considerably reduced compared to competing products. This is achieved at all flow rates 3. Improved temperature range on the RPV seal -35º C to +90º C. Approved for -20º C to +65º C 4. The valve is designed for easy handling / lifting 5. Improved design eliminating the blind plug on top of the valve 6. The RPV opening/closing pressure range is improved 7. The RPV valve is oxygen pressure surge tested by BAM for WP 200 bar 8. RPV (3.0 – 7.5 Bar) 9. Impact value of 400J / 111KG can be achieved with inlet thread 25ES 10. RPV unit including non return valve to prevent a back-flow into the cylinder The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR084_rev1 - © www.reklamehuset.dk
BAM Approved: According to ISO 10297 & ISO 15996 Working pressure: 200 bar Inlet connection: 25E, 25ES, 17E, M18 or other on request Inlet filter: On request Working temperature: -20º C to +65º C Outlet connection: Pin Index ISO 407 / AS 2473.3 / CGA V-1 Dip Tube: On request Dip Tube thread: M10 x 0.75, or other on request Anti dust tube: On request RPV / MPR: 3.0 – 7.5 bar retain pressure Handwheel: Plastic Ø58.5 or Ø65 and with logo. Aluminium handwheel or free spinning handwheel on request. Burst disc: On request, according to CGA S 1.1/TRG 254-2 Nr 1 Excess flow device: On request Tape / Plastic protection cap: On request Surface treatment: Chromium plated Passage: Ø 2,5 mm
518
Off-line high-pressure cylinder valve RPV / MPR – NEW IMPROVED DESIGN RPV / MPR WITH CONICAL SEALING SYSTEM: 1. Improved lifetime on the RPV unit, reducing maintenance costs 2. RPV noise level considerably reduced compared to competing products. This is achieved at all flow rates 3. Improved temperature range on the RPV seal (-40º C to + 140º C) 4. The RPV can withstand 60 blow downs at 300bar 5. The opening/closing pressure range is improved 6. The valve is oxygen pressure surge tested by BAM for WP 300bar 7. RPV unit can be replaced 8. Impact value of 400J / 111KG can be achived with inlet thread 25ES
512+518 (512H0023) 31,8
8,0 9,0
33,2
42,5
512+518 31,8
8,0 9,0
33,2
116,7
Ø
79 ,2
Dimensions may vary dependent on the valve variant!
42,5
62,5
79 ,2
Dimensions may vary dependent on the valve variant!
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PRO37_rev2 - © www.reklamehuset.dk
Ø
BAM Approved: Acording to ISO 10297 & 15996 Working pressure: 300 bar & 200 bar Inlet connection: 25E, 25ES, or other on request Inlet filter: On request Outlet connection: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Dip Tube: On request, M10x075, or other Anti dust tube: On request Residual Pressure Valve / Minimum Pressure Retention: 3 - 7.5 bar retain pressure Handwheel: Plastic Ø58.5 or Ø65 and with logo on request. Aluminium handwheel is optional. Free spinning handwheel on request Burst disc: On request, according to CGA S 1.1 Max flow: On request Tape / Plastic protection cap: On request Fusible element: On request Surface treatment: Chromium plating on request.
62,5
The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
512
Off-line high-pressure cylinder valve RPV / MPR STANDARD DESIGN
RPV / MPR: 1. The valve is oxygen pressure surge tested by BAM for WP 300bar 2. Reliable opening/closing setting of the RPV function 3. Minimum Pressure Retention: 3 - 7.5 bar 4. Approved for -40 C 5. The distance from the sealingface to the tip of the pin can be customised 6. Impact value of 400J / 111KG can be achived with inlet thread 25ES. 7. RPV unit can be replaced. The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
8,0 9,0
33,2
42,5
62,5
512+518 31,8
8,0 9,0
33,2
116,7
Ø
79 ,2
Dimensions may vary dependent on the valve variant!
42,5
62,5
79 ,2
Dimensions may vary dependent on the valve variant!
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR037_rev2 - © www.reklamehuset.dk
Ø
BAM Approved: Acording to ISO 10297 & 15996 Working pressure: 300 bar & 200 bar Inlet connection: 25E, 25ES, or other on request Inlet filter: On request Outlet connection: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Dip Tube: On request, M10x075, or other Anti dust tube: On request Residual Pressure Valve / Minimum Pressure Retention: 3 - 7.5 bar retain pressure Handwheel: Plastic Ø58.5 or Ø65 and with logo on request. Aluminium handwheel is optional. Free spinning handwheel on request Burst disc: On request, according to CGA S 1.1 Max flow: On request Tape / Plastic protection cap: On request Fusible element: On request Surface treatment: Chromium plating on request.
512+518 (512H0023) 31,8
451
In-line high-pressure cylinder valve SIMPLE VALVE OR WITH RPV / MPR RPV / MPR:
1. The valve is oxygen pressure surge tested by BAM for WP 300 bar 2. Reliable opening/closing setting of the RPV function 3. Minimum Pressure Retention: 3 - 7.5 bar 4. Approved for -40° C 5. The distance from the sealing surface to the tip of the pin can be customised 6. Impact value of 400J / 111KG can be achieved with inlet thread 25ES 7. RPV unit can be replaced 8. Max passage: Ø6mm
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
EC Type-Examinations and QS Certification by:
BAM-TPED-QS-2009/001
001PR038_rev1 - © www.reklamehuset.dk
BAM Approved: Acording to ISO 10297 & 15996 Working pressure: 300 bar & 200 bar Inlet connection: 25E, 25ES, orother on request Inlet filter: On request Outlet connection for simple valve: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Outlet with RPV (200 bar): DS2404, DIN, BS and others when compatible Dip Tube: On request, M10x075, or other Anti dust tube: On request Residual Pressure Valve / Minimum Pressure Retention: 3 - 7.5 bar retain pressure Handwheel: Plastic Ø58.5 or Ø65 and with logo on request. Aluminium handwheel is optional. Free spinning and oval handwheel on request. For key operated valve see our 456 variant Burst disc: On request, according to CGA S 1.1 Max flow: On request Tape / Plastic protection cap: On request Fusible element: On request Surface treatment: Chromium plating on request Passage: Ø4 and Ø6 depending on configuration
The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
435
Pin Index Valve MEDICAL PIN INDEX VALVE
1. The valve is oxygen pressure surge tested by BAM for WP 200 bar 2. Approved for -20° C to +65° C 3. Impact value of 400J / 111KG can be achieved with inlet thread 25ES 4. RPV Optional (3.0 – 7.5 bar) 5. Max passage: Ø 2,5 mm 6. RPV unit including non return valve to prevent a back-flow into the cylinder The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR084_rev1 - © www.reklamehuset.dk
BAM Approved: According to ISO 10297 Working pressure: 200 bar Inlet connection: 25E, 25ES, 17E, 17ES, M18 or other on request Inlet filter: On request Working temperature: -20º C to +65º C Outlet connection: Pin Index ISO 407 / AS 2473.3 / CGA V-1 Dip Tube: On request Dip Tube thread: M10 x 0.75, or other on request Anti dust tube: On request Optional RPV / MPR: 3 - 7.5 bar retain pressure Handwheel: Wing, toggle, black plastic handwheel Burst disc: On request, according to CGA S 1.1 / TRG 254-2 Nr 1 Excess flow device: On request Tape / Plastic protection cap: On request Surface treatment: Chromium plated Passage: Ø 2,5 mm
In-line high-pressure cylinder valve RPV / MPR - NEW LOW COST DESIGN (compared to the off-line valve, however there are limited numbers of outlets)
1. Improved lifetime on the RPV unit, reducing maintenance costs 2. RPV noise level considerably reduced compared to competing products. This is achieved at all flow rates 3. Improved temperature range on the RPV seal (-40º C to + 140º C) 4. The RPV can withstand 60 blow downs at 300 bar 5. The opening/closing pressure range is improved 6. The valve is oxygen pressure surge tested by BAM for WP 300bar 7. RPV unit can be replaced 8. Impact value of 400J / 111KG can be achieved with inlet thread 25E The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
Müller Gas Equipment A/S
Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
Type-Examinations and QS Certification by:
EC
See our online catalogue
BAM-TPED-QS-2009/001
001PR038_rev1 - © www.reklamehuset.dk
BAM Approved: According to ISO 10297 & 15996 Working pressure: 300 bar & 200 bar Inlet connection: 25E, 25ES, or other on request Inlet filter: On request Outlet connection: BS 341-3 No. 2,3,4. AS2473.2 Type 10,11,20,50,51,60,61. CGA 580, DS2404 B.8. ISO 228-1 G3/4 RH INT. NBR. ISO 5145 W30x2 or other on request Dip Tube: On request, M10x075, or other Anti dust tube: On request Residual Pressure Valve / Minimum Pressure Retention: 3 - 7.5 bar retain pressure Handwheel: Plastic Ø58.5 or Ø65 and with logo on request. Aluminium handwheel is optional. Free spinning handwheel on request Burst disc: On request, according to CGA S 1.1 Max flow: On request Tape / Plastic protection cap: On request Fusible element: On request Surface treatment: Chromium plating on request Max passage: Ø4
418
126
Light weight and small valve for 5L cylinders SIMPLE VALVE OR WITH RPV / MPR RPV / MPR: 1. The valve is oxygen pressure surge tested by BAM for WP 200 bar 2. Reliable opening/closing setting of the RPV function 3. Minimum Pressure Retention: 2 - 7.5 bar 4. Approved for -20° C 5. The distance from the sealing surface to the tip of the pin can be customized 6. RPV unit can be replaced 7. Max passage: Ø2.5 mm 8. Pressure gauge is optional The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
32
87
O
72
32
38
40
113
36
O
77
43
40
86
See our online catalogue
oo1PR045_rev1 - © www.reklamehuset.dk
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
MÜLLER GAS EQUIPMENT´s expressed written permission.
BAM Approved: According to ISO 10297 Working pressure: 200 bar Inlet connection: 17E or other on request Inlet filter: On request Outlet connection for simple valve: DS2404, DIN, AFNOR, CGA, BS, AS or other on request Outlet with RPV (200 bar): DS2404, DIN, BS and others when compatible Dip Tube: On request, M10x075, or other Anti dust tube: On request Residual Pressure Valve / Minimum Pressure Retention: 2 - 7.5 bar retain pressure Handwheel: Plastic Ø38 mm and with logo on request Burst disc: On request, according to CGA S 1.1 Excess flow device: On request Tape / Plastic protection cap: On request Fusible element: On request Surface treatment: Chromium plating on request Passage: Ø2.5 mm Pressure gauge: Optional
Telephone: +45 73 42 12 12
Müller Gas Equipment A/S
EC Type-Examinations and GAS EQUIPMENT A/S QS Certification by:
Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
BAM-TPED-QS-2009/001
Telefax:
+45 73 42 12 07
E-Mail:
INFO@BMV.DK
Homepage: WWW.BMV.DK
127
Light weight and small valve for 5L cylinders SIMPLE TOP OUTLET VALVE
1. The valve is oxygen pressure surge tested by BAM for WP 200 bar 2. Max passage: Ø2.5 mm 3. Manomenter for cylinder pressure The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on an automated assembly line and the valve is subjected to a 100% functional test. After passing all tests on the assembly line it is securely packed for shipping.
49
49
49
49
34
34
34
34
103
See our online catalogue
Müller Gas Equipment A/S
EC Type-Examinations and QS Certification by:
Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
BAM-TPED-QS-2009/001
001PRO89_rev1 - © www.reklamehuset.dk
41
41
41
41
41
41
41
41
101
73
O
73
73
101
101
101
73
BAM Approved: According to ISO 10297 Working pressure: 200 bar Inlet connection: M18x1,5, 5/8-18 UNF or other on request Inlet filter: On request Outlet connection for simple valve: DS2404, DIN, AFNOR, CGA, BS, AS or other on request Dip Tube: On request, M10x075, or other Anti dust tube: On request Handwheel: Plastic Ø38 mm and with logo on request Burst disc: On request, according to CGA S 1.1 Excess flow device: On request Tape / Plastic protection cap: On request Surface treatment: Chromium plating on request Passage: Ø2.5 mm
O
618
VIPR - Oxygen TECHNICAL SPECIFICATIONS: • 2 stage regulating system (300-50 bar / 0-6 bar) • European Patent No. EP2215537 • Pressure indicator (0-360 bar) Built into the valve body • Pressure gauge (0-10 bar) Built into the valve body • 2 stage regulating system, safety valve, RPV in one unit for easy maintainance • Filter incorporated to protect the regulating unit • Max flow rate 250 l/min Min. 20 bar
For further technical specifications on this valve please see reverse.
Optional Protective guard
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
618 VIPR - Oxygen About this valve The Müller type 618 industrial VIPR sets new standards with its new innovative design. It is equipped with a two stage regulating unit including safety valve and RPV function. The regulating unit has a patented balanced system allowing you to change the flow settings by applying a constant torque. Pressure gauge and flow meter are incorporated into the main valve body for better protection. For easy maintenance of the regulating unit, the main valve can be shut off and the complete unit can be replaced without further disassembly.
46,5
130
130
74
101 authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
MÜLLER GAS EQUIPMENT´s expressed written permission.
MÜLLER GAS EQUIPMENT´s expressed written permission.
74
101
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
74
O
5 16
10 ° o ro nr eq ue st
130
74
Outlet pressure in bar
6
Specification of MGE´s 618 Oxygen VIPR valv Working pressure: Test pressure: Inlet connection: Filling connection: Outlet connection: Outlet pressure: Residual pressure valve:
4
200 bar / 300 bar 240 bar / 360 bar 25 ES, or on request on request G 3/8" RH , or on request adjustable 0 - 6 bar 3 - 7,5 bar retain pressure
Safety valve opening: Safety valve closing: Valve weight: Valve dimension, hight over cylinde Opening/ closing to cylinder: Regulation of flow:
250
300
Working Test pre Inlet con Filling co Outlet co Outlet pr Residua
2
0
0
50
100
150
200
Inlet pressure in bar
VIPR for Oxygen type “618” for inlet pressure 300 bar Dynamic expansion curve
Regulation curve 618-VIPR valve (Oxygen)
Specification of MGE´s 618 Oxygen VIPR valve 350 max. 12 bar 200 bar / 300 bar Safety valve opening: 240 bar / 360 bar Safety valve closing: 325 min. 6,0 bar 25 ES, or on request 1900 g Valve weight: 300 110 mm (calculated) on request Valve dimension, hight over cylinder: G 3/8" RH , or on request Opening/ closing to cylinder: 275 Handwheel adjustable 0 - 6 bar Handwheel Regulation of flow: 3 - 7,5 bar retain pressure 250 225 200 175 150 125 100 75 50 25 0 0 0.5 1 1.5
4
2
Outlet flow, oxygen (l/min)
Working pressure: Test pressure: Inlet connection: Filling connection: Outlet connection: Outlet pressure: Residual pressure valve:
6
Outlet pressure in bar
Key flat 30
VIPR for Oxygen type “618” for inlet pressure 300 bar Dynamic expansion curve
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
p5= 4.82
78,5
18
p5= 4.82
101
74
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
O
5 16
8
O
8
75
51
46,5
The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on a automated assembly line using Helium as media for accurate leak testing. The valve is subjected to a 100% functional test on the assembly line with complete records of all test results, ensuring full data traceability. When the valve has passed all tests on the assembly line, it is allocated a unique serial number relating to the recorded test data, giving you a world class industrial VIPR! BAM Approved: acording to ISO 22435 46,5 78,5 75 51 18 bar & 200 bar Working pressure: 300 Inlet connection: 25E, 25ES, or other on request. Anti dust tube on request Outlet connection: Quick connect EN 561, screw connection ISO 3253, or other on request Filling connection: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Outlet pressure: adjustable 0 - 6 bar Residual pressure valve: 3 - 7,5 bar retain pressure Safety valve opening: max. 12 bar Safety valve closing: min. 6,0 bar He leak tested: leak rate of ≈ 2x10-3 mBAR x l/sec (6 cm3/h) Valve weight: 1,9 kg Valve dimension, height over cylinder: 110 mm (approx) Opening/closing to cylinder: Handwheel Regulation of flow: Handwheel Key flat 30 Burst disc: on request 5 Not for medical use 16
78,5
18
1/4
Telephone: +45 73 42 12 12 Telefax: E-Mail:
+45 73 42 12 07
INFO@BMV.DK
GAS EQUIPMENT A/S Homepage: WWW.BMV.DK
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
8.5
9
9.5 10
Outlet pressure, oxygen (bar) Inlet pressure pw = 200 / 300 bar Inlet pressure p3 = 20 bar
0
0
50
100
150
200
250
300
See our online catalogue
Outlet flow, oxygen (l/min)
Regulation curve 618-VIPR valve (Oxygen) 350 325 300 275 250 225 200 175 150 125 100 75 50 25 0
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk 0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
Outlet pressure, oxygen (bar)
7.5
8
8.5
9
9.5 10
001PR035_rev2 - © www.reklamehuset.dk
Inlet pressure in bar
618
VIPR - Inert TECHNICAL SPECIFICATIONS: • 2 stage regulating system (300-50 bar / 0-6 bar) • European Patent No. EP2215537 • Pressure indicator (0-360 bar) Built into the valve body • Pressure gauge (0-40 l/min) Built into the valve body • 2 stage regulating system, safety valve, RPV in one unit for easy maintainance • Filter incorporated to protect the regulating unit • Max flow rate 32 l/min Min. 13 bar
For further technical specifications on this valve please see reverse.
Optional Protective guard
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
618 VIPR - Inert
About this valve The Müller type 618 industrial VIPR sets new standards with its new innovative design. It is equipped with a two stage regulating unit including safety valve and RPV function. The regulating unit has a patented balanced system allowing you to change the flow settings by applying a constant torque. Pressure gauge and flow meter are incorporated into the main valve body for better protection. For easy maintenance of the regulating unit, the main valve can be shut off and the complete unit can be replaced without further disassembly.
75
78,5
74
130
101 74
21
15 12,5
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
5 16
Key flat 30
MÜLLER GAS EQUIPMENT´s expressed written permission.
20 17,5
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
25 22,5
O
5 16
10 10 ° o ro nr eq ue st
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
74
101
130
18
Regulationcurve 618-VIPR valve (Inert gas)
7,5 5
74
101
74
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
51
46,5
130
BAM Approved: acording to ISO 22435 Working pressure: 200 bar 46,5 300 bar & 78,5 75 51 Inlet connection: 25E, 1825ES, or other on request. Anti dust tube on request Outlet connection: Quick connect EN 561, screw connection ISO 3253, or other on request Filling connection: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Outlet pressure: adjustable 0 - 25 l/min Residual pressure valve: 3 - 7,5 bar retain pressure Safety valve opening: max. 12 bar Safety valve closing: min. 6,0 bar He leak tested: leak rate of ≈ 2x10-3 mBAR x l/sec (6 cm3/h) Valve weight: 1,9 kg Valve dimension, height over cylinder: 110 mm (approx) Opening/closing to cylinder: Handwheel Regulation of flow: Handwheel Burst disc: on request Key flat 30 Not for medical use
78,5 18
Outlet flow, air (l/min)
The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on a automated assembly line using Helium as media for accurate leak testing. The valve is subjected to a 100% functional test on the assembly line with complete records of all test results, ensuring full data traceability. When the valve has passed all tests on the assembly line, it is allocated a unique serial number relating to the recorded test data, giving you a world class industrial VIPR!
46,5
2,5 0
0
50
Specification of MGE´s 618 Inertgas VIP 200 bar / 300 bar 240 bar / 360 bar 25 ES, or on request on request G 3/8" RH , or on request adjustable 0 - 25 L/min 3 - 7,5 bar retain pressure
Working pressure: Test pressure: Inlet connection: Filling connection: Outlet connection: Outlet pressure: Residual pressure valve:
100
150
200
Safety valve opening: Safety valve closing: Valve weight: Valve dimension, hight ov Opening/ closing to cylind Wo Regulation of flow: Tes
250
Inle Filli Out Out Res
Inlet pressure, argon (bar)
5 16
O Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
Regulation curve 618-VIPR valve (Inert gas)
Regulationcurve 618-VIPR valve (Inert gas) 25
Specification of MGE´s 618 Oxygen VIPR valve40
Outlet flow, air (l/min)
20 17,5
200 bar / 300 bar 240 bar / 360 bar 25 ES, or on request on request G 3/8" RH , or on request adjustable 0 - 6 bar 3 - 7,5 bar retain pressure
Safety valve opening: Safety valve closing: Valve weight: Valve dimension, hight over cylinder: Opening/ closing to cylinder: Regulation of flow:
Outlet flow, argon (l/min)
Working pressure: Test pressure: Inlet connection: Filling connection: Outlet connection: Outlet pressure: Residual pressure valve:
22,5
15 12,5 10 7,5 5
max. 12 bar
min. 6,0 bar 35 1900 g
1/4
110 mm (calculated) Handwheel
Handwheel 30
Telephone: +45 73 42 12 12 Telefax: E-Mail:
25
+45 73 42 12 07
INFO@BMV.DK
GAS EQUIPMENT A/S Homepage: WWW.BMV.DK
20 15 10 5
2,5 0
0 0
50
100
150
200
250
300
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
7
7.5
8
Outlet pressure, argon (bar)
Inlet pressure, argon (bar)
See our online catalogue Regulation curve 618-VIPR valve (Inert gas) 40 35 Gas Equipment A/S Müller
w, argon (l/min)
30 Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk 25 20 15
001PR033_rev2 - © www.reklamehuset.dk
Inlet pressure pw = 200 / 300 bar Inlet pressure p3 = 13 bar
618
VIPR - Acetylene TECHNICAL SPECIFICATIONS: • 1 stage regulating system (0 - max. 1,5 bar) • European Patent No. EP2215537 • Pressure indicator (0-40 bar) Built into the valve body • Pressure gauge (0-2,5 bar) Built into the valve body • Filter incorporated to protect the regulating unit • Standard flow rate Q1=30 l/min
For further technical specifications on this valve please see reverse.
Optional Protective guard
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
618 VIPR - Acetylene About this valve The Müller type 618 industrial VIPR sets new standards with its new innovative design. It is equipped with a 1 stage regulating unit. The regulating unit has a patented balanced system allowing you to change the flow settings by applying a constant torque. Pressure gauges are incorporated into the main valve body for better protection. For easy maintenance of the regulating unit, the main valve can be shut off and the complete unit can be replaced without further disassembly.
130 101 74
74 74
74
130
101 130
101
30
O
5 5 16 16
O
Key Key flat 30 flat 30
O
5 16
25 20 15 10 5
74
MÜLLER GAS EQUIPMENT´s expressed written permission.
35
10 ° o ro nr eq ue st
Outlet flow, air (l/min)
40
101
74
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
74
45
0
0
1
2
3
4
5
6
7
8
Working pre 9 Specification 10Specification 11 12 of 13 MGE´s 15 16 17 18VIPR 19 20 of14 MGE´s 618618 Acetylene Acetylene VIPR valv
Test pressu Inlet connec ValveValve weight: weight: Filling conne ValveValve dimension, dimension, hight hight over cylinder: over cyli conne 25 ES, 25orES, on request or on request Opening/ Opening/ closing closing to cylinder: to Outlet cylinder: on request on request Regulation Regulation of flow: of flow: Outlet press G 3/8"GLH 3/8" , orLH on, request or on request adjustable adjustable 0 - 1,50bar - 1,5 max. bar max.
18 bar18 bar Inlet pressure, air (bar) 25 bar25 bar
Working Working pressure: pressure: Test pressure: Test pressure: Inlet connection: Inlet connection: FillingFilling connection: connection: OutletOutlet connection: connection: OutletOutlet pressure: pressure:
5 16
Regulationcurve 618-VIPR valve (Acetylene gas)
Regulationcurve 618-VIPR valve (Acetylene gas) Outlet flow, acetylene (l/min)
50 45
Specification of MGE´s 618 Acetylene VIPR valve
40
Outlet flow, air (l/min)
18 bar 25 bar 25 ES, or on request on request G 3/8" LH , or on request adjustable 0 - 1,5 bar max.
Working pressure: Test pressure: Inlet connection: Filling connection: Outlet connection: Outlet pressure:
35 30 25
Valve weight: Valve dimension, hight over cylinder: Opening/ closing to cylinder: Regulation of flow:
1900 g 110 mm (calculated) Handwheel Handwheel
20 15
60 50 40 30
1/4
20
Telephone: +45 73 42 12 12
10 GAS EQUIPMENT A/S
Telefax: E-Mail:
+45 73 42 12 07
INFO@BMV.DK
Homepage: WWW.BMV.DK
0 0
10
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2 1.3 1.4 1.5
Outlet pressure, acetylene (bar)
5 0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Inlet pressure pw =18 bar Inlet pressure p3 = 4 bar
See our online catalogue
Regulationcurve 618-VIPR valve (Acetylene gas) 60
Müller Gas Equipment A/S 50
Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg 40 Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk 30 20 10
001PR031_rev2 - © www.reklamehuset.dk
Inlet pressure, air (bar)
let flow, acetylene (l/min)
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
MÜLLER GAS EQUIPMENT´s expressed written permission.
50
Key flat 30
0
70 70
Regulationcurve 618-VIPR valve (Acetylene gas)
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
O
79,5
51 51 13,5
79,579,5 13,513,5
130
BAM Approved: acording to ISO 22435 Working pressure: 18 bar 51 70 46,5 79,5 13,5 Inlet connection: 25E, 25ES, W31.3, W29.2, W36 or other on request Outlet connection: Quick connect EN 561, screw connection ISO 3253, or other on request Filling connection: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Outlet pressure: adjustable 0 - max 1,5 bar He leak tested: leak rate of ≈ 2x10-3 mBAR x l/sec (6 cm3/h) Valve weight: 1,9 kg Valve dimension, height over cylinder: 110 mm (approx) Opening/closing to cylinder: Handwheel Regulation of flow: Handwheel Not for medical use
MÜLLER GAS EQUIPMENT´s expressed written permission. As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
The valve is manufactured on state in Denmark of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on a automated assembly line using Helium as media for accurate leak testing. The valve is subjected to a 100% functional test on the assembly line with complete records of all test results, ensuring full data traceability. When the valve has passed all tests on the assembly line, it is allocated a unique serial number relating to the recorded test data, giving you a world class industrial VIPR!
46,5 46,546,5
Protective Guard for the 618 industrial VIPR TECHNICAL SPECIFICATIONS: • BAM approved acc. to ISO 1117 (ISO PC marked) • Electrical properties; Surface resistivity according to ASTM D257 (Ω/sq):102 – 104 • Approved for -40° C in accordance with ISO 11117 • Approved for a total package mass of 100KG (50L cylinder) in accordance with ISO 11117 • Tamper resistant design • Offers maximum protection of the VIPR • Standard colour is black, but can be changed according to customer requirements • Can be equipped with customer logo • Can be equipped with customer RFD chip • Made of HDPE (High Density Polyethylene)
The Guard is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The guard is designed with knob for easy handling of the cylinder.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
Protective Guard
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR039_rev1 - © www.reklamehuset.dk
O
17 8
250
38
O 60
19
for the 618 industrial VIPR
Protective Guard for the 618 industrial VIPR Ø 198 TECHNICAL SPECIFICATIONS: • BAM approved acc. to ISO 11117 • Electrical properties; Surface resistivity according to ASTM D257 (Ω/sq):102 – 104 • Approved for -40° C in accordance with ISO 11117 • Approved for a total package mass of 100KG (50L cylinder) in accordance with ISO 11117 • Tamper proof design • Offers maximum protection of the VIPR • Colour is black, but can be changed to meet customer requirements • Can be equipped with customer logo • Can be equipped with customer RFD chip • Can be equipped with plug for filling port • Made of HDPE (High Density Polyethylene) The Guard is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The guard is designed with knob for easy handling of the cylinder.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
Protective Guard
for the 618 industrial VIPR | Ø 198
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR087_rev1 - © www.reklamehuset.dk
See our online catalogue
617
VIPR Valve - Oxygen Compact Light Weight TECHNICAL SPECIFICATIONS: • 2 stage regulation system (optimal 0-10 bar) • European Patent No. EP2215537 • Pressure indicator (0-360 bar) • Pressure gauge (10-16 bar) • 2 stage regulation system, safety valve, RPV in one unit for easy maintainance • Filter incorporated to protect the regulation unit • Max flow rate 250 I/min Min. 20 bar
For further technical specifications on this valve please see reverse.
Optimal Protective guard
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
617 VIPR Valve - Oxygen Compact Light Weight About this valve The Müller type 617 industrial VIPR sets new standards with its new innovative design. It is equipped with a two stage regulating unit including safety valve and RPV function. The regulating unit has a patented balanced system allowing you to change the fl ow settings by applying a constant torque. For easy maintenance of the regulating unit, the main valve can be shut off and the complete unit can be replaced without further disassembly. The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on a automated assembly line using Helium as media for accurate leak testing. The valve is subjected to a 100% functional test on the assembly line with complete records of all test results, ensuring full data traceability. When the valve has passed all tests on the assembly line, it is allocated a unique serial number relating to the recorded test data, giving you a world class industrial VIPR! BAM Approved: according to EN ISO 22435 Working pressure: 300 bar & 200 bar Inlet connection: 25 E, 25ES, or other on request. Anti dust tube on request Outlet connection: Quick connect EN 561, screw connection ISO 3253, or other on request Filling connection: DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5145 or other on request Outlet pressure: adjustable 0 - 6 bar / 0 - 10 bar Residual pressure valve: 3 - 7,5 bar retain pressure Safety valve opening: 12 bar / 18 bar Safety valve closing: min. 6,0 bar / 10 bar He leak tested: leak rate of ≈ 2x10-3 mBAR x l/sec (6 cm3/h) Valve weight: 1,4 kg. Valve dimension, height over cylinder: 125 mm (approx) Opening/closing to cylinder: Handwheel Regulation of flow: Handwheel Burst disc: on request Contact our Sales Department to place your order: Phone: +45 73 42 12 12 info@bmv.dk
Regulation curve 617-VIPR Valve (Oxygen)
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
EC Type-Examinations and QS Certification by:
BAM-TPED-QS-2009/001
001P0029_rev2 - 920724 - © www.reklamehuset.dk
VIPR for Oxygen type “617” for inlet pressure 300 bar Dynamic expansion curve
617
VIPR Valve - Inert Compact Light Weight TECHNICAL SPECIFICATIONS: • 2 stage regulation system (300-50 bar / 0-4,5 bar) • European Patent No. EP2215537 • Pressure indicator (0-360 bar) • Pressure gauge (0-35 I/min) • 2 stage regulation system, safety valve, RPV in one unit for easy maintainance • Filter incorporated to protect the regulation unit • Max flow rate 32 I/min
For further technical specifications on this valve please see reverse.
Optimal Protective guard
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
617 VIPR Valve - Inert Compact Light Weight About this valve The Müller type 617 industrial VIPR sets new standards with its new innovative design. It is equipped with a two stage regulating unit including safety valve and RPV function. The regulating unit has a patented balanced system allowing you to change the fl ow settings by applying a constant torque. For easy maintenance of the regulating unit, the main valve can be shut off and the complete unit can be replaced without further disassembly. The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on a automated assembly line using Helium as media for accurate leak testing. The valve is subjected to a 100% functional test on the assembly line with complete records of all test results, ensuring full data traceability. When the valve has passed all tests on the assembly line, it is allocated a unique serial number relating to the recorded test data, giving you a world class industrial VIPR! BAM Approved: according to EN ISO 22435 Working pressure: 300 bar & 200 bar Inlet connection: 25 ES, 25ES, or other on request. Anti dust tube on request Outlet connection: Quick connect EN 561, screw connection ISO 3253, or other on request Filling connection: DS2404, DIN, NEN, AFNOR, UNI, NBN,CGA, BS, AS, ISO 5145 or other on request Outlet pressure: adjustable 0 - 25 I/min Residual pressure valve: 3 - 7,5 bar retain pressure Safety valve opening: max. 12 bar Safety valve closing: min. 6,0 bar He leak tested: leak rate of ≈ 2x10-3 mBAR x l/sec (6 cm3/h) Valve weight: 1,4 kg. Valve dimension, height over cylinder: 125 mm (approx) Opening/closing to cylinder: Handwheel Regulation of flow: Handwheel Burst disc: on request Not for medical use Contact our Sales Department to place your order: Phone: +45 73 42 12 12 info@bmv.dk
Regulation curve 617-VIPR Valve (Inert gas)
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
EC Type-Examinations and QS Certification by:
BAM-TPED-QS-2009/001
001P0029_rev2 - 920724 - © www.reklamehuset.dk
Regulation curve 617-VIPR Valve (Inert gas)
617
VIPR Valve - Acetylene Compact Light Weight TECHNICAL SPECIFICATIONS: • 1 stage regulation system (0 - max. 1,5 bar) • European Patent No. EP2215537 • Pressure indicator (0-40 bar) • Pressure gauge (0 - 2,5 bar) • Filter incorporated to protect the regulation unit • Max flow rate Q1=30 I/min
For further technical specifications on this valve please see reverse.
Optimal Protective guard
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
617 VIPR Valve - Acetylene Compact Light Weight About this valve The Müller type 617 industrial VIPR sets new standards with its new innovative design. It is equipped with a one stage regulating unit. The regulating unit has a patented balanced system allowing you to change the fl ow settings by applying a constant torque. For easy maintenance of the regulating unit, the main valve can be shut off and the complete unit can be replaced without further disassembly. The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled on a automated assembly line using Helium as media for accurate leak testing. The valve is subjected to a 100% functional test on the assembly line with complete records of all test results, ensuring full data traceability. When the valve has passed all tests on the assembly line, it is allocated a unique serial number relating to the recorded test data, giving you a world class industrial VIPR! BAM Approved: according to ISO 22435 Working pressure: 18 bar Inlet connection: 25 E, 25ES, W31.3, W29.2, W36 or other on request Outlet connection: Quick connect EN 561, screw connection ISO 3253, or other on request Filling connection: DS2404, DIN, NEN, AFNOR, UNI, NBN,CGA, BS, AS, ISO 5145 or other on request Outlet pressure: Adjustable 0 - max 1,5 bar He leak tested: leak rate of ≈ 2x10-3 mBAR x l/sec (6 cm3/h) Valve weight: 1,4 kg. Valve dimension, height over cylinder: 125 mm (approx) Opening/closing to cylinder: Handwheel Regulation of flow: Handwheel Not for medical use Contact our Sales Department to place your order: Phone: +45 73 42 12 12 info@bmv.dk
Regulation curve 617-VIPR Valve (Acetylene gas)
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
EC Type-Examinations and QS Certification by:
BAM-TPED-QS-2009/001
001P0029_rev2 - 920724 - © www.reklamehuset.dk
Regulation curve 617-VIPR valve (Acetylene gas)
616
High Flow Pressure Reduction Valve
Approved for 310 bar (4500 psi) oxygen - also for bundle application (ISO VB)
TECHNICAL SPECIFICATIONS: • Pressure Reduction Valve typical from 300 bar to 70 +15/-10 bar • Approved for working pressure up to 310 bar (4500 psi) • Safety Valve • Residual Pressure Valve • Ø4 passage to achieve high flow rates • Filter incorporated to protect the regulating unit • Optionel: Separate filling port (typical 300 bar), which also can be used for consumption without pressure reduction • Can be delivered without filling port for bundle applications
For further technical specifications on this valve please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
616 High Flow Pressure Reduction Valve About this valve The Müller High Flow Pressure Reduction Valve type 616 for industrial use offers a new innovative design for pack or single cylinder applications. The valve is equipped with a regulating unit, safety valve and RPV function, and it is approved for 300 bar Inert and Oxygen service. The possibility to fill through the 300 bar filling connection and take out 70 bar at the low pressure side with your existing regulator gives a unique cost saving opportunity. Upgrade your 200 bar bundles to 300 bar without complications for your customers.
33,2
43,5
67,5
67,5
124,0
The valve is manufactured on state of the art machinery, and the quality is monitored throughout the entire process. The final product is subjected to a 100% functional test after assembly ensuring you a world class Pressure Reduction Valve!
Option: Without filling port for bundle applications.
78,5
Key flat 30 56,5
The regulating unit of the valve has a high flow capacity compared to its size and is preset at 70 bar +15/-10 bar. For single cylinder applications, the valve can be used without a permanent protection guard (cylinder package ≤ 100kg).
31,0
9,0 8,0
Filling port (optional)
O 112 O 80
BAM Approved: according to EN ISO 10297 & 15996 Working pressure: ≤ 310 bar (4500 psi) Inlet connection: 25 ES, or other on request Outlet connection: to customer specification Filling connection: to customer specification Static outlet pressure: preset to 70 bar +15/-10 bar at 300 bar inlet pressure Residual pressure valve: 3 - 7,5 bar retain pressure Safety valve: Max. open/min. close 180/100 bar Valve weight: 1,0 - 1,15 kg. Valve dimension, height over cylinder: 100 mm (approx) Opening/closing to cylinder: Handwheel
Outlet port
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
EC Type-Examinations and QS Certification by:
BAM-TPED-QS-2009/001
001P0029_rev2 - 920724 - © www.reklamehuset.dk
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 info@bmv.dk
616
Bi-directional Pressure Reduction Valve Approved for 300 bar oxygen - also for bundle application (ISO VB)
TECHNICAL SPECIFICATIONS: • Pressure Reduction Valve from 300 bar to 70 +/- 10 bar • BAM approved for 300 bar Oxygen and Inert service according to EN ISO 10297 &15996 • Safety Valve • Residual Pressure Valve (with integrated check valve) • Filter incorporated to protect the regulating unit • One outlet/fill port (to national 200-150 bar standard). Filling 300 bar via a special fill connecter and you consume through the same port • Active indicator to show the 300 bar in the cylinder
For further technical specifications on this valve please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
616 Pressure Reduction Valve
31,8
MÜLLER GAS EQUIPMENT´s expressed written permission.
67,5
46,5
56,5
The regulating unit of the valve has a high flow capacity compared to its size and is preset at 70 bar +/- 10 bar. For single cylinder applications, the valve can be used without a permanent protection guard (cylinder package ≤ 100kg). The valve is manufactured on state of the art machinery, and the quality is monitored throughout the entire process. The final product is subjected to a 100% functional test after assembly ensuring you a world class Pressure Reduction Valve!
Outlet pressure with different outlet O flows measured with air
89 ,0
70
Regulated pressure [bar] Reduced to outlet pressure [bar] with closed outlet (zero flow)
BAM Approved: according to EN ISO 10297 & 15996 Working pressure: ≤ 300 bar Active indicator showing content of the cylinder all the time. Inlet connection: 25 E, or other on request Outlet connection: to customer specification Outlet pressure: preset to 70 bar +/- 10 bar Residual pressure valve: 3 - 7,5 bar retain pressure Safety valve opening: max. 140 bar Cv value: 0,31 (with air) Valve weight: 1,0 kg. Valve dimension, height over cylinder: 100 mm (approx) Opening/closing to cylinder: Handwheel Contact our Sales Department to place your order: Phone: +45 73 42 12 12 info@bmv.dk
33,2
124,0
8,0
78,5
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
About this valve The Müller Bi-directional Pressure Reduction Valve type 616 for industrial use offers a new innovative design for single cylinder applications. The valve is provided with a regulating unit, safety valve and RPV function, and it is approved for 300 bar Inert and Oxygen service. You fill 300 bar via a special fill connecter and you consume through the same port. The possibility to fill 300 bar through the 200 bar outlet connection and take out 70 bar at the same port using your existing regulator gives a unique cost saving opportunity, and you can upgrade your 200 bar cylinders to 300 bar without complications for your customers. A 300 bar active Indicator class 2.5 shows the cylinder contents at all times. The valve can fit into an existing guard with easy accessibility to the outlet/fill port and indicator as well as the hand wheel. Burst disc can be provided as option.
O 80 ,0
60 50
Closed outlet
4080
10 m3/h
70 30 60
25 m3/h 50 m3/h
2050
75 m3/h
40 10 30
020 0 10 0 -10
25
75
50
100
125
150
175
200
225
275
250
300
Inlet pressure [bar] 0
50
100
150
200
250
300
Inlet pressure [bar]
Max. flow capacity with unobstructed outlet measured with air
Outlet pressure with different outlet flows measured with air 140
60 50 Closed outlet
40 40
10 m3/h
30
30
25 m3/h
20
50 m3/h
20 10 10 0
0 -10
0
75 m3/h
0
50
100
150
200
250
300
Max. flow capasity, air [m^3/h]
50
70
160 120 140 120 100 100 80 80 60 60 40 40 20
20
0
-20
25
50
75
Inlet pressure [bar]
125
100
150
175
200
225
250
275
300
0
0
0
5
5
10
10
Inlet pressure [bar]
140
air [m^3/h]
Max, flow capasity, air [m^3/h] Max. flow capasity,
15
20
25
30
[bar] 30 20Inlet pressure 25
35
35
40
40
45
45
Max. flow capacity with unobstructed outlet measured with air
140 100 120
80 60
EC Type-Examinations and QS Certification by:
100 40
Müller20Gas Equipment A/S 80
0 Mommarkvej 7-11 10· Vollerup · 20DK-6400 Sønderborg 0 5 15 25 30 35 40 45 50 Telefon: 60 -20 +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
40 20
Inlet pressure [bar]
50
50
Inlet pressure [bar]
See our online catalogue
160
120
15
BAM-TPED-QS-2009/001
001PR040_rev 1 - © www.reklamehuset.dk
80
60
Max, flow capasity, air [m^3/h]
Reduced to outlet pressure [bar] Regulated pressure [bar] with closed outlet (zero flow)
70
580
Fire suppression valve pneumatically operated / Manually operated 1. Quick release for CO2, Ar, Inergen 2. Manual and pneumatical activation of the valve 3. Approved for (-20º C - +65º C) 4. The valve is tested by BAM for WP 200 bar at 15º C 5. The valve fullfills ATR D 2/2012 as a type “C” 100 activations 6. The valve must be used with a valve protection guard according to 4.1.6.8 ADR The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled and subjected to a 100% functional test. After passing all tests it is securely packed for shipping.
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR036_rev1 - © www.reklamehuset.dk
BAM Approved: According to ATR D 2/2012 as a type “C” 100 activations Test pressure: 250 bar at 15º C Working pressure: 200 bar at 15º C Inlet connection: 25E according to ISO 11363-1, or other on request Inlet filter: On request Outlet connection: W21,8x1/14 DIN 477-1, or other on request Dip Tube thread: M 16 x 1, or other on request Activation: Pneumatically or by handwheel Handwheel: Plastic Ø58.5 or Ø65 and with logo on request. Aluminium handwheel is optional. Free spinning handwheel on request Burst disc: According to CGA S 1.1 or TRG 254-2 Nr 1 Tape / Plastic protection cap: On request Passage: Ø12 mm
580
Quick release MGE Electrically / Pneumatically operated Fire suppression valve / Manually operated
1. 2. 2. 3. 5. 6.
Quick release for CO2, Ar, Inergen The valve is tested by BAM for WP 200 bar at 15º C Electrical og manual activation of the valve The valve is TPED approved The valve is approved for (-20º C - +65º C) Electrical activation by 24VDC. G3/8 Connection or other on request 7. The valve fullfills ATR D 2/2012 as a type “C” 100 activations The electrical solenoid valve must be disassembled during transport to prevent accidental activation of the valve
The valve is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. The valve is assembled and subjected to a 100% functional test. After passing all tests it is securely packed for shipping.
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR090_rev1 - © www.reklamehuset.dk
BAM Approved: According to ATR D 2/2012 as a type “C” 100 activations Working pressure: 200 bar at 15º C Test pressure: 250 bar at 15º C Inlet connection: 25E according to ISO 11363-1, or other on request Inlet filter: On request Outlet connection: W21,8x1/14 DIN 477-1, or other on request Dip Tube Thread: M 16 x 1, or other on request Activation: The valve can be activated by solenoid valve, manually or by handwheel Burst disc: According to CGA S 1.1 or TRG 254-2 Nr 1 Tape / Plastic protection cap: On request Passage: Ø12 mm
431
FILL CONNECTOR
STRAIGHT SIMPLE
Fill connector for valves with RPV / non RPV
The fill connector is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. We supply to all major gas companies world wide and our raw materials are sourced from reliable European suppliers. Individual requirements constantly present new challenges producing unique solutions. Therefore we have many years of experience in making customized solutions. • Body material only from reliable European suppliers with certificate DS/EN 10204 • Simple use • Replaceable spare parts • Swivel design • All relevant data engraved
Hydraulic Test Pressure (TP): 675 bar (Optional) Pin: Monel. Fitted with a fixed or spring loaded pressure pin for the RPV Swivel design: Knurled or simple Surface treatment: Plain or chrome plated O2 Cleaning: According to EIGA Guideline IGC Doc 33/06/E O2 Test: Available with BAM or CTE test (test costs may apply) Engraving: All relevant data are engraved Body Material: Brass Inlet connection: Hose connection according to customer requirement. Only use and replace parts with original MGE spareparts.
90 years of proven experience Discover more of our products at: www.bmv.dk
431
STRAIGHT SIMPLE
Fill Connectors for valves with RPV / non RPV
Body fixed-/ spring loaded pin
Regulated pressure [bar] with closed outlet (zero flow)
Valve connection
Hose connection
80 70 60 50 40 30 20 10 0 -10
0
50
100
150
200
250
300
80
160
70
Max. flow capasity, air [m^3/h]
Regulated pressure [bar] with closed outlet (zero flow)
Inlet pressure [bar]
60
DS2404, 50 DIN, NEN, AFNOR, UNI, NBN, CGA, BS, 40 AS, ISO 5745 or other on request 30 20 10 0
140 120 100 80 60
ISO 5145, DIN 477-1, DS 2404, CGA V-1, BS 341-3, AS 2473.2, NF E 29-650, ISO 8434-1, ISO 3253 or other on request
40 20
0 Only-10use original spare parts from MGE. Please contact MGE for15a complete spare parts list50 0 5 10 20 25 30 35 40 45 -20 and do not hesitate toInletcontact us for further information. pressure [bar]
0
50
100
150
200
250
300
See our online catalogue
Max. flow capasity, air [m^3/h]
160 140 120 100 80 60
EC Type-Examinations and QS Certification by:
40
Müller20Gas Equipment A/S 0 Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg 0 5 10 15 20 25 30 35 40 45 50 Telefon: -20 +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
Inlet pressure [bar]
BAM-TPED-QS-2009/001
001PR041_rev 1 - © www.reklamehuset.dk
Inlet pressure [bar]
431 ANGLE
ANGLE FILL CONNECTOR
Angle Fill Connector for valves with RPV / non RPV
The fill connector is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. We supply to all major gas companies world wide and our raw materials are sourced from reliable European suppliers. Individual requirements constantly present new challenges producing unique solutions. Therefore we have many years of experience in making customized solutions. • Body material only from reliable European suppliers with certificate DS/EN 10204 • Simple use • Replaceable spare parts • Angle design • All relevant data engraved
Hydraulic Test Pressure (TP): 675 bar (Optional) Pin: Monel. Fitted with a fixed or spring loaded pressure pin for the RPV Swivel design: Knurled or simple Surface treatment: Plain or chrome plated O2 Cleaning: According to EIGA Guideline IGC Doc 33/06/E O2 Test: Available with BAM or CTE test (test costs may apply) Engraving: All relevant data are engraved Body Material: Brass Inlet connection: Hose connection according to customer requirement. Only use and replace parts with original MGE spare parts.
90 years of proven experience Discover more of our products at: www.bmv.dk
431
ANGLE
Regulated pressure [bar] with closed outlet (zero flow)
Angle Fill Connectors for valves with RPV / non RPV
50 40 30 20 10 0 -10
0
50
150
60 50 40 30 20 10 0
50
100
150
200
250
300
DIN 477-1, DS 2404, CGA V-1, BS 341-3, AS 2473.2, NF E 29-650, ISO 8434-1, ISO 3253 or other on request
200
250
300
140 120 100 80 60 40 20 0 -20
0
5
10
Inlet pressure [bar]
15
20
25
30
35
40
45
140 120 100 80 60
EC Type-Examinations and QS Certification by:
40
Müller20Gas Equipment A/S 0 Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg 0 5 10 15 20 25 30 35 40 45 50 Telefon: -20 +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
Inlet pressure [bar]
50
Inlet pressure [bar]
See our online catalogue
160
Max. flow capasity, air [m^3/h]
100
160
70
-10
60
BAM-TPED-QS-2009/001
001PR042_rev 1 - © www.reklamehuset.dk
80
0
70
ISO 5145, Inlet pressure [bar]
Max. flow capasity, air [m^3/h]
Regulated pressure [bar] with closed outlet (zero flow)
DS2404, DIN, NEN, AFNOR, UNI, NBN, CGA, BS, AS, ISO 5745 or other on request
80
431
ANGLE HANDWHEEL DESIGN
Fill connector for valves with RPV / non RPV
The fill connector is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. We supply to all major gas companies world wide and our raw materials are sourced from reliable European suppliers. Individual requirements constantly present new challenges producing unique solutions. Therefore we have many years of experience in making customized solutions. • Body material only from reliable European suppliers with certificate DS/EN 10204 • For side outlet filling • Easy handling • Replaceable spare parts • All relevant data engraved • Can be used for liquid CO2 at temperatures down to -60° C • Improved lifetime of sealing gaskets with lip seal requiring only low torque
Hydraulic Test Pressure (TP): 675 bar (Optional) Pin: Monel. Fitted with a fixed or spring loaded pressure pin for the RPV Handwheel: Plastic Ø58.5 or Ø65. Aluminium handwheel is optional Surface treatment: Plain or chrome plated O2 Cleaning: According to EIGA Guideline IGC Doc 33/06/E (Optional 50 mg/m2 for hydrocarbon and 50 mg/m2 for particles) O2 Test: Available with BAM or CTE test (test costs may apply) Engraving: All relevant data are engraved Body Material: Brass Valve connection: ISO 5145, DIN 477-1, DS 2404, CGA V-1, BS 341-3, AS 2473.2, NF E 29-650, UNI 11144 or other on request Hose connection: ISO 8434-1, ISO 3253, ISO 8434-6 or other on request
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR048_rev1 - © www.reklamehuset.dk
Only use and replace parts with original MGE spare parts.
431
ANGLE/SWIVEL DESIGN
Swivel Fill Connector for valves with RPV / non RPV The fill connector is manufactured in Denmark on state of the art manufacturing equipment, and the quality is monitored throughout the entire process. We supply to all major gas companies world wide and our raw materials are sourced from reliable European suppliers. Individual requirements constantly present new challenges producing unique solutions. Therefore we have many years of experience in making customized solutions. • For top and side outlet filling • Body material only from reliable European suppliers with certificate DS/EN 10204 • Easy handling • Replaceable spare parts • Angle/swivel design • All relevant data engraved • Can be used for liquid CO2 at temperatures down to -60° C • Improved lifetime of sealing gaskets with lip seal requiring only low torque
Hydraulic Test Pressure (TP): 675 bar (Optional) Pin: Monel. Fitted with a fixed or spring loaded pressure pin for the RPV Swivel design: Knurled or simple Handwheel: Plastic Ø58.5 or Ø65. Aluminium handwheel is optional Surface treatment: Plain or chrome plated O2 Cleaning: According to EIGA Guideline IGC Doc 33/06/E. Optional 50 mg/m2 for hydrocarbon x, 50 mg/m2 for particles. O2 Test: Available with BAM or CTE test (test costs may apply) Engraving: All relevant data are engraved Body Material: Brass Valve connection: ISO 5145, DIN 477-1, DS 2404, CGA V-1, BS 341-3, AS 2473.2, NF E 29-650, UNI 11144 or other on request Hose connection: ISO 8434-1, ISO 3253, ISO 8434-6 or other on request
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR049_rev1 - © www.reklamehuset.dk
Only use and replace parts with original MGE spare parts.
047 Budget regulator for gas cylinders TECHNICAL SPECIFICATIONS: Single stage regulator Inlet pressure 0,3-16 bar Outlet pressure 29, 30, 50 mbar Capacity 4 kg/h (dependent on inlet and outlet pressure) OPSO: Can be combined with MGE type 869 • PRV • PN 16 • Typically combined with MGE type 869 • • • • •
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
047 Budget regulator for gas cylinders
74
54
About this regulator The low pressure regulator type 047 is a single stage regulator typically used for cylinders. However, the regulator can be integrated in all other systems which require a regulated pressure at a low capacity.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
25
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 0,3-16 bar Inlet connection: Pol, G1/4, G3/8, G1/2, G3/4 or other on request. Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 4 kg/h (Propane) Outlet pressure: 29 / 30 / 50 mbar or other on request Pressure relief valve (PRV): 90-160 mbar or other on request Over-pressure shut-off (OPSO): Can be combined with MGE type 869 Regulator weight: Approx. 1,2 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C
110
Mode of operation The low pressure regulator type 047 is a single stage regulator for gas cylinders which reduces the non-regulated pressure from the cylinder to a nominal set pressure e.g. 50 mbar.
107
MÜLLER GAS EQUIPMENT´s expressed written permission.
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR070_rev1 - © www.reklamehuset.dk
128
447
Budget regulator TECHNICAL SPECIFICATIONS: • • • • • • • • •
Single or second stage regulator Inlet pressure 1-4 bar Outlet pressure 29, 30, 50 mbar Capacity 10 kg/h (dependent on inlet and outlet pressure) OPSO: Can be combined with MGE type 869 PRV (optional) PN 4 Safety diaphragm (optional) Typically combined with MGE type 869
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
447 Budget regulator
74
About this regulator The budget regulator type 447 is a single or second stage regulator with a large range of application possibilities. The regulator can be integrated in all systems, which require a regulated pressure at a low capacity.
54
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
25
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1-4 bar Inlet connection: G1/4, G3/8, G1/2, G3/4 or other on request. Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 10 kg/h (Propane) Outlet pressure: 29 / 30 / 50 mbar or other on request Pressure relief valve (PRV): 90-160 mbar or other on request Over-pressure shut-off (OPSO): Can be combined with MGE type 869 Regulator weight: Approx. 1,2 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C
110
Mode of operation The low pressure regulator type 447 is a single or second stage regulator for gas systems which reduces the non-regulated pressure from up to 4 bar to a nominal pressure e.g. 50 mbar.
107
MÜLLER GAS EQUIPMENT´s expressed written permission.
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR071_rev1 - © www.reklamehuset.dk
128
056 Automatic change-over device TECHNICAL SPECIFICATIONS: • • • • • •
Automatic change-over device Inlet pressure 1,4-12 bar Outlet pressure 0,4-2,5 bar Capacity 4-12 kg/h (dependent on inlet and outlet pressure) PN 16 Hose connections for cylinders on request
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
056 Automatic change-over device
145
About this automatic change-over device The device can operate 2 gas cylinders at the same time. One cylinder is the operating cylinder, being used until the remaining pressure in the operating cylinder sinks below a defined pressure. Now the reserve cylinder is used. You have to close the empty cylinder by switching the knob to the reserve cylinder which is now the operating cylinder. You can change the empty cylinder and add a full cylinder. The benefit of this is that you have a constant gas supply and can change the empty cylinder during the use of gas.
72
32
056-2 (orange knob) Inlet pressure: 2-12 bar Service pressure: 1,6 bar Reserve pressure: 1,0 bar Capacity: 6 kg/h
7
Available models 056-1 (green knob) Inlet pressure: 1,4-12 bar Service pressure: 0,9 bar Reserve pressure: 0,4 bar Capacity: 4 kg/h
056-3 (black knob) Inlet pressure: 2,4-12 bar Service pressure: 2 bar Reserve pressure: 1,4 bar Capacity: 12 kg/h
34 68
056-4 (red knob) Inlet pressure: 2,8-12 bar Service pressure: 2,5 bar Reserve pressure: 1,8 bar Capacity: 12 kg/h
145
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet connection: M18x1,25 int., G3/8 LH Int., G3/8 RH Int. or other on request. Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Weight: Approx. 1,6 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR075_rev1 - © www.reklamehuset.dk
54
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
TECHNICAL SPECIFICATIONS:
057/ 058
Single stage regulator with flange connection - fixed and adjustable
TECHNICAL SPECIFICATIONS: • • • • •
Single stage regulator Inlet pressure 1,8-16 bar Outlet pressure 0,8-4 bar Capacity 24 kg/h (dependent on inlet and outlet pressure) PN 16
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
TECHNICAL SPECIFICATIONS: 057/058 Single stage regulator with flange connection - fixed and adjustable
MÜLLER GAS EQUIPMENT´s expressed written permission.
About this regulator The pressure regulators type 057 and 058 are single stage regulators with a width range of application possibilities. The regulators can be integrated in all systems, which require a regulated pressure.
120
Mode of operation The pressure regulators type 057 and 058 are single stage regulators for gas systems which reduce the non- regulated pressure from up to 16 bar to a nominal or adjusted pressure of up to 4 bar.
56
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1,8-16 bar Inlet connection: G1/4, G3/8, G1/2, G3/4 or other on request. Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 24 kg/h (Propane) Outlet pressure: 0,8-4 bar Regulator weight: Approx. 1 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C 85
56
120
Telephone: +4 Telefax:
+4
E-Mail:
IN
GAS EQUIPMENT A/S Homepage: W
56
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
85
MÜLLER GAS EQUIPMENT´s expressed written permission.
56
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
85
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR072_rev1 - © www.reklamehuset.dk
56
56
8
070 / 071
Single stage regulator with hose connection - fixed and adjustable
TECHNICAL SPECIFICATIONS: • • • • •
Single stage regulator Inlet pressure 1,8-16 bar Outlet pressure 0,8-4 bar Capacity 24 kg/h (dependent on inlet and outlet pressure) PN 16
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
TECHNICAL SPECIFICATIONS: 070/071 Single stage regulator with hose connection - fixed and adjustable
MÜLLER GAS EQUIPMENT´s expressed written permission.
About this regulator The pressure regulators type 070 and 071 are single stage regulators with a width range of application possibilities. The regulator can be integrated in all systems, which requires a regulated pressure.
120
Mode of operation The pressure regulators type 070 and 071 are single stage regulators for gas systems which reduce the non- regulated pressure from up to 16 bar to a nominal or adjusted pressure of up to 4 bar.
56
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1,8-16 bar Inlet connection: Pol, hose connection or other on request. Outlet connection: Hose connection or other on request Capacity: 24 kg/h (Propane) Outlet pressure: 0,8-4 bar Regulator weight: Approx. 1 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C 85
120
56
Telepho
Telefax
E-Mail:
GAS EQUIPMENT A/S Homep
56
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
85 As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
56
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR073_rev1 - © www.reklamehuset.dk
56
56
85
160
Adjustable regulator for high capacity TECHNICAL SPECIFICATIONS: • • • • • • • •
First stage regulator Inlet pressure 1,5 - 16 bar Outlet pressure 0,75 - 1,5 bar Capacity 100 kg/h - 150 kg/h (dependent on inlet and outlet pressure) OPSO (optional) PRV (optional) Pressure gauge (optional) PN 25
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
160 Adjustable regulator for high capacity
Adjustable 166
About this regulator Intermediate Pressure Regulator type MGE 160. The intermediate pressure regulator type MGE 160 is a regulator of 1st stage for LPG which reduces the non-regulated pressure of the gas cylinder to a fixed outlet pressure. The regulator is equipped with an overpressure shut-off valve (OPSO) and a safety relief valve (PRV).
54
41
84
171
371
185
95
137
MÜLLER GAS EQUIPMENT´s expressed written permission.
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1,5-16 bar Inlet connection: G1/4, G3/8, G1/2, G3/4, G1 or other on request. Outlet connection: G1/4, G3/8, G1/2, G3/4, G1 or other on request Capacity: 100 kg/h - 150 kg/h (Propane) Outlet pressure: 0,75 - 4 bar other on request Pressure relief valve (PRV): 1,4 - 5 bar other on request Over pressure shut off (OPSO): 1,2 - 4,7 bar other on request Regulator weight: Approx.5 kg Gas: LPG/LNG or on request Working temperatur: -40°C to +80°C
90,9
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
Mode of operation The intermediate pressure regulator reduces the non-regulated pressure from the gas cylinder to nominal pressure. At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the safety device (OPSO) will be reached which will then close by itself and block the gas flow before the regulator. Should an additional pressure rise occur e.g. through a not complete closing of the over-pressure shut-off valve (OPSO), the relief valve (PRV) will automatically release the gas flow in a limited quantity to the atmosphere after obtaining the fixed activation pressure.
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR076_rev1 - © www.reklamehuset.dk
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
457 / 458
Two stage regulator - fixed and adjustable outlet pressure
TECHNICAL SPECIFICATIONS: Two stage regulator Inlet pressure 1,8-16 bar Outlet pressure 0,8-4 bar Capacity 24 kg/h (dependent on inlet and outlet pressure) OPSO: Can be combined with MGE type 869 • PN 16 • Typically combined with MGE type 869 • • • • •
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS: 457/458 Two stage regulator - fixed and adjustable outlet pressure
31
119
119
99
Regulator combination type MGE 457/458 The regulator combination type MGE 457/458 is a regulator of 1st stage for LPG which reduces the non-regulated pressure of the gas cylinder to a fixed or adjusted outlet pressure. The regulator is equipped with an over-pressure shut-off valve (OPSO).
71
71,2
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
MÜLLER GAS EQUIPMENT´s expressed written permission.
Bright = open Red = closed
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
Mode of operation The regulator combination reduces the non-regulated pressure from the gas cylinder using 1 stage to nominal pressure. At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the safety device (OPSO) will be reached which will then close by itself and block the gas flow before the regulator. The operating state of the over-pressure shut-off valve (OPSO) can be monitored at the glass.
90
90
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1,8-16 bar Inlet connection: G1/4, G3/8, G1/2, G3/4 or other on request. Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 24 kg/h (Propane) Outlet pressure: 0,8-4 bar 176 Over-pressure shut-off (OPSO): Can be combined with MGE type 869 Regulator weight: Approx. 1 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C
176
Telephone: +45 73 42 12 12 Telefax:
+45 73 42 12 07
E-Mail:
INFO@BMV.DK
GAS EQUIPMENT A/S Homepage: WWW.BMV.DK
90
90
71,2
MÜLLER GAS EQUIPMENT´s expressed written permission.
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
31
119
119
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR074_rev1 - © www.reklamehuset.dk
176
554-1
Regulator combination 554 with OPSO and PRV for gas tank application TECHNICAL SPECIFICATIONS: • Two stage regulator combination • Inlet pressure 1,5-16 bar • Outlet pressure 29 / 30 / 37 / 50 /100 mbar or other on request • Capacity 10 kg/h (dependent on inlet and outlet pressure) • OPSO: 75-150 mbar • PRV: 90-200 mbar • PN 25 • For gas tank applications • Optional test equipment on request
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS: 554-1 Regulator combination 554 with OPSO and PRV for gas tank application
25
92 27
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
229
MÜLLER GAS EQUIPMENT´s expressed written permission.
Bright=open Red=closed
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
Mode of operation The regulator combination reduces the non-regulated pressure from the pressure receptacle using 2 stages to a nominal 50 mbar. At an inadmissible rise of the outlet pressure of the 2nd stage regulator the activation pressure of the safety device (OPSO) will be reached which will then close by itself and block the gas flow before the regulator of 1st stage. The operating status of the over-pressure shutoff valve (OPSO) can be monitored at the glass.
102
About this regulator Regulator combination type MGE 554/859. The regulator combination type MGE 554/859 is a combination of a regulator of 1st stage and a regulator of 2nd stage for LPG which reduces the non-regulated pressure of the pressure receptacle to a fixed outlet pressure. The regulator of 1st stage is equipped with an overpressure shut-off valve (OPSO) and the regulator of 2nd stage is equipped with safety relief valve (PRV).
64 70
48
70
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
108 242
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR078_rev1 - © www.reklamehuset.dk
DVGW Approved: According to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1,5-16 bar Inlet connection: Pol, G1/4, G3/8, G1/2, G3/4 or other on request Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 10 kg/h (Propane) Outlet pressure: 29 / 30/ 37 / 50 / 100 mbar or other on request Pressure relief valve (PRV): 90-200 mbar or other on request Over-pressure shut-off (OPSO): 75-150 mbar Regulator weight: Approx. 2 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +80°C
88
Should an additional pressure rise occur e.g. through a not complete closing of the over-pressure shut-off valve (OPSO), the relief valve (PRV) will automatically release the gas flow in a limited quantity to the atmosphere after obtaining the fixed activation pressure.
554-2
Middle range pressure regulator combination 554 with OPSO and PRV TECHNICAL SPECIFICATIONS: • Single stage regulator combination • Inlet pressure 1,75-16 bar • Outlet pressure 0,75 / 1,0 / 1,5 / 2,0 /2,5 bar or other on request • Capacity 40-60 kg/h (dependent on inlet and outlet pressure) • OPSO: 1,1 - 3,2 bar • PRV: 1,4-3,5 bar • PN 25 • Adjustable (optional) • Pressure gauge (optional) • Optional test equipment on request
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS: 554-2 Middle range pressure regulator combination 554 with OPSO and PRV
25
88 28
Mode of operation The regulator combination reduces the non-regulated pressure from the gas cylinder using 1 stage to nominal pressure. At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the safety device (OPSO) will be reached which will then close by itself and block the gas flow before the regulator. The operating state of the over-pressure shut-off valve (OPSO) can be monitored at the glass.
151
About this regulator Regulator combination type MGE 554. The regulator combination type MGE 554 is a regulator of 1st stage for LPG which reduces the non-regulated pressure of the gas cylinder to a fixed outlet pressure. The regulator is equipped with an over-pressure shut-off valve (OPSO) and a safety relief valve (PRV).
Bright=open Red=closed
45
90
DVGW Approved: According to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1,75-16 bar Inlet connection: Pol, G1/4, G3/8, G1/2, G3/4 or other on request Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 40-60 kg/h (Propane) Outlet pressure: 0,75 / 1,0 / 1,5 / 2,0 /2,5 bar or other on request Pressure relief valve (PRV): 1,4-3,5 bar or other on request Over-pressure shut-off (OPSO): 1,1 - 3,2 bar Regulator weight: Approx. 2 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +80°C
54
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
MÜLLER GAS EQUIPMENT´s expressed written permission.
Should an additional pressure rise occur e.g. through a not complete closing of the over-pressure shut-off valve (OPSO), the relief valve (PRV) will automatically release the gas flow in a limited quantity to the atmosphere after obtaining the fixed activation pressure.
64
218
109
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR079_rev1 - © www.reklamehuset.dk
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
554-3
Low pressure regulator combination 554 with OPSO and PRV or double diaphragm TECHNICAL SPECIFICATIONS: • Single stage regulator combination • Inlet pressure 0,5-4 bar • Outlet pressure 30 / 37 / 50 mbar or other on request • Capacity 12-24 kg/h (dependent on inlet and outlet pressure) • OPSO: 90-120 mbar bar • PRV: 90-200 mbar • PS 4 • Additional diaphragm (optional) • Pressure gauge (optional) • Optional test equipment on request
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
88
25
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
228
MÜLLER GAS EQUIPMENT´s expressed written permission.
Bright=open Red=closed
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
Mode of operation The regulator combination reduces the regulated pressure from the gas cylinder using 1 stage to nominal pressure. At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the safety device (OPSO) will be reached which will then close by itself and block the gas flow before the regulator. The operating state of the over-pressure shut-off valve (OPSO) can be monitored at the glass.
28
About this regulator Regulator combination type MGE 554. The regulator combination type MGE 554 is a regulator of 2nd stage for LPG which reduces the regulated pressure of the regulator of 1st stage to a fixed outlet pressure. The regulator is equipped with an over-pressure shut-off valve (OPSO) and an additional diaphragm (AD) or a safety relief valve (PRV). Due to the safety diaphragm it is not necessary to have a vent.
102
TECHNICAL SPECIFICATIONS: 554-3 Low pressure regulator combination 554 with OPSO and PRV or double diaphragm
241
70
DVGW Approved: According to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 0,5-4 bar Inlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 12-24 kg/h (Propane) Outlet pressure: 30 / 37 / 50 mbar or other on request Pressure relief valve (PRV): 90-200 mbar or other on request Over-pressure shut-off (OPSO): 75-150 mbar Regulator weight: Approx. 2 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +80°C
54
45
64
Should an additional pressure rise occur e.g. through a not complete closing of the over-pressure shut-off valve (OPSO), the safety diaphragms will stop a non-controlled discharge of the gas.
109
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR080_rev1 - © www.reklamehuset.dk
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
555 High capacity LPG regulator TECHNICAL SPECIFICATIONS: • • • • • • • •
Second stage regulator Inlet pressure 1-4 bar Outlet pressure 29, 37, 50, 67 or 100 mbar Capacity 60 kg/h – 150 kg/h (dependent on inlet and outlet pressure) OPSO (optional) PRV or additional diaphragm Pressure gauge (optional) PN 4
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
555 High capacity LPG regulator
42
Mode of operation The regulators reduce the regulated pressure from the pressure regulator of the 1st stage to nominal 29/37/50/67 or 100 mbar. At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the over pressure shut off valve (OPSO) is reached and the over-pressure shut-off valve will close by itself and block the gas flow before the regulator. Should an additional pressure rise occur e.g. through a not complete closing of the over-pressure shut-off valve the relief valve (PRV) will automatically release a limited gas flow to the atmosphere after obtaining the fixed activation pressure.
33
137
About this regulator The low pressure regulators type MGE 555 are pressure regulators of 2nd stage for liquid gas which reduce the regulated pressure from the regulators of 1st stage to a fixed outlet pressure. As a safety device the regulator is equipped with an over-pressure shut-off valve (OPSO) and a safety relief valve (PRV). Furthermore it can be equipped with an additional diaphragm.
104
259
222 78
MÜLLER GAS EQUIPMENT´s expressed written permission.
DVGW Approved: according to EN 16129 / CE marking according to 2016/426 (GAR) Inlet pressure: 1-4 bar Inlet connection: G1 Outlet connection: G1 Capacity: 60-150 kg/h (Propane) Outlet pressure: 29 / 37 / 50 / 67 / 100 mbar other on request Pressure relief valve (PRV): 90-190 mbar other on request Over pressure shut off (OPSO): 90-160 mbar other on request Regulator weight: Approx.5 kg Gas: LPG/LNG, natural gas or on request Working temperatur: -40°C to +80°C
138
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
If equipped with additional diaphragm it can be used in housing installations.
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR077_rev2 - © www.reklamehuset.dk
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
744
Pressure relief valve
TECHNICAL SPECIFICATIONS: • • • •
Set pressure 1-5 bar Can be combined with nearly every MGE regulator Spare part PN 25
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
67 25
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Connection: G 1/4 Set pressure: 1-5 bar or other on request Weight: Approx. 0,5 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
About this over-pressure shut off safety device At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the safety device (PRV) will be reached which will then exhaust the gas flow.
MÜLLER GAS EQUIPMENT´s expressed written permission.
744 Pressure relief valve
G 1/4
O 45
y Ke t fla
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR083_rev1 - © www.reklamehuset.dk
21
See our online catalogue
858 / 859 Regulator with OPSO TECHNICAL SPECIFICATIONS: • • • • • • • •
First stage regulator Inlet pressure 3-16 bar Outlet pressure 1-4 bar Capacity 10 kg/h OPSO included PN 25 Type 858 adjustable regulation Type 859 fixed regulation
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
858/859 Regulator with OPSO
47
88
70
About this regulator The regulator type MGE 859 is a regulator of single stage for LPG, which reduces the non-regulated pressure of the pressure receptacle to a fixed outlet pressure. The regulator is equipped with an over-pressure shut-off valve (OPSO).
MÜLLER GAS EQUIPMENT´s expressed written permission.
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Inlet pressure: 1-16 bar Inlet connection: POL or other on request Outlet connection: G1/4, G3/8, G1/2, G3/4 or other on request Capacity: 10 kg/h (Propane) Outlet pressure: 3,2 bar or other on request Over-pressure schut-off (OPSO): 75-150 mbar Weight: Approx. 1 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C
48,0 27
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
Bright=open Red=closed
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
Mode of operation The regulator reduces the non-regulated pressure receptacle using one stage to a nominal 3 bar. At an inadmissible rise of the outlet pressure, the safety device (OPSO) will be reached which will then close by itself and block the gas flow. The operating state of the overpressure shut-off valve (OPSO) can be monitored at the glass
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR081_rev1 - © www.reklamehuset.dk
92
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
865
Over-pressure shut off safety device
TECHNICAL SPECIFICATIONS: • • • •
Set pressure 1,2 - 4,7 bar OPSO for type 160 Spare part PN 25
For further technical specifications on this regulator please see reverse.
90 years of proven experience Discover more of our products at: www.bmv.dk
TECHNICAL SPECIFICATIONS:
DVGW Approved: according to EN 16129 / CE marking according to 2009/142/EC Connection: To be connected with type 160 Set pressure: 1,2 - 4,7 bar or other on request Weight: Approx. 1 kg Gas: LPG / LNG / Propane / Butane / Natural gas or other on request Working temperatur: -40°C to +50°C
84
authorized by MÜLLER GAS EQUIPMENT A/S or copied or otherwise utilized by anybody without
If the OPSO device needs to be reset then disassemble the brass protection cap and the internal thread has to be screwed on to the threaded pin. The cap can then be pulled back to reset the OPSO device.
50
74
MÜLLER GAS EQUIPMENT´s expressed written permission.
About this over-pressure shut off safety device At an inadmissible rise of the outlet pressure of the regulator the activation pressure of the safety device (OPSO) will be reached which will then close by itself and block the gas flow.
As this is the property of MÜLLER GAS EQUIPMENT A/S this must not be passed on to any person not
865 Over-pressure shut off safety device
Protection cap can be used as tool for resetting the OPSO device.
91
Contact our Sales Department to place your order: Phone: +45 73 42 12 12 · info@bmv.dk
124
See our online catalogue
Müller Gas Equipment A/S Mommarkvej 7-11 · Vollerup · DK-6400 Sønderborg Telefon: +45 73 42 12 12 · Fax: +45 73 42 12 07 · email: info@bmv.dk · www.bmv.dk
001PR082_rev1 - © www.reklamehuset.dk
156