English
RAIS/attika – User manual for Nexo
Installation of stove with swivel base Stoves can be delivered with and without swivel mount. If the stove is delivered with a swivel mount, the swivel base is mounted below the stove and fixed with two transport screws (wing screws) The swivel base can be installed to: • rotate 90° (45° to each side) – (setting on delivery) • rotate 360° Open the front by pulling out the hatch and lifting it.
The swivel base lock (spring) can be tightened by loosening the screw to adjust the mounting and move the mounting towards the plus mark. Remember to retighten the screw. Remove the two wing screws. The stove will now rotate 45° in each direction. For setting the swivel base to 360°. Remove the stop screw. The stove will now rotate freely.
D M Y
Corrections:
Change order Drawing change:
Designer:
Improvement proposal:
ksj
Established: NOTE: 06-04-2018 The stove may only be installed by an authorised/qualified RAIS dealer/installer. See www.rais.com for a list of dealers.Bend Tool:
Project man
14 OV
UV