CALL US NOW _____________________ USA/CA : +1-888-266-0783 UK : +44-808-164-5280
It’s a simple process of Fix Canon Printer Error Code 1702 which generally cause when the ink absorber is almost full. So, if you have an issue with your Canon Printer, which shows up Error 1702, then don’t panic. This error message indicates the ink absorber is full. Your printer has an ink absorber which takes in ink during the printing and print head cleaning operation. Over the life of the printer, the amount of ink that the ink absorber has absorbed is calculated by the printer. Eventually, after substantial use, the printer will enter an error condition when the ink absorber is almost full/completely full. To protect the printer from damage, you will not be able to print at all once the ink absorber is full. Then don’t worry about anything, you just need to follow the steps which given below to fix this issue. Also, you can contact to Canon Printer technical support number to lineup with experts to get comprehensive guidance for this.
Solutions to Fix Canon Printer Error Code 1702 Solution 1:- Press “OK” to Continue Printing •When you get Canon Printer Error Code 1702, while you’re working. Then it’s suggestion for you to run a press the machine’s “OK” button to continue printing. •If you are unable to print or connect to your Canon Printer in your Windows computer, then go to the next solution. Solution 2:- Resetting the Waste Ink Absorber
•Resetting the waste ink absorber on a Canon printer can resolve some error codes that appear when turning it on. Follow these steps:•Make sure the Canon Printer is turned OFF. •Then press and hold the “Resume” button (triangle inside a circle). •Whilst it is held down, hold down the “Power” button. Then the green led light should come on.
•Keep the “Power” button held down. Release the “Resume” button and then press it twice. The light should go amber, and then green again. •Then release the “Power” button. •Next, press the “Resume” button four times and then press the “Power” button and straight after to confirm the selected action (Reset Counter Absorber). •Then you turn off the printer and then turn it on again. Start your task. •If printing is in progress and is able to continue printing, then it’s ok. Else, go to the next solution. Solution 3:- Replacing the Ink Absorber •The waste ink pad has become full and needs to be replaced to get everything back to alright. You will have to order new waste ink pads from Canon and replace accordingly to get everything back to alright. •Replacing the ink absorber is a complicated and potentially messy procedure. Even if the ink absorber is successfully changed, the ink absorber counter must be reset. It’s not recommended for you to replace the waste ink absorber tank. •If you want, you can also take the help of our Canon Printer Customer Service Experts to replace it at your doorstep at cost-effective rates. •I hope your issue is fixed, after perfume the above solutions. •If you need any help with the above solution, then you can contact at canon printer customer service phone number and get help from Canon customer support experts for getting instant assistance.