2 minute read
FBS Hub&Terrace - System Components 08
8.3 Sensors
8.3.1 Drivers for W1 - INS268 HB PIR (xx)
Advertisement
8.3.4 Sensor for Double Height Area - Helvar 322
8.3.5 Sensor for Single Height Area - Helvar 321
heights that are too high for general sensors
The High Bay Multisensor is a compact unit that provides energy-saving functions in DALI applications where mounting heights are too high for standard sensors, such as warehouses and factories.
Product datasheet
8.3.2 Drivers for WW2 - INS273 HB PIR (xx) DALI
Sealed with a gasket that protects it from dust and water, this IP65 sensor is designed to be recessed in a ceiling void or in a luminaire construction.
Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, fewer
LS/PD LT2 LI UF | Sensors for light management systems control in response to changes in space occupancy. It switches the lights on when its coverage area is
8.3.3 Sensor for P2 - ZMP_2873346
LS/PD LT2 LI UF | Sensors for light management systems
PIR sensor
The Multisensor is a compact unit that combines a light sensor for constant light control and a passive infrared (PIR) presence detector to provide energy-saving functions in a DALI system.
The light sensor measures reflected light from the surface directly beneath it. The unit uses this information to maintain a constant light level by adjusting the lamp outputs.
The PIR sensor enables the Multisensor to switch the lights on when its coverage area is occupied, and off when it is unoccupied.
Light sensor Status LED
The sensor’s settings are adjusted using Helvar’s Designer or Toolbox software.
The High Bay Multisensor is compatible with Helvar’s lighting systems and configuration software, Designer and Toolbox.
Key Features
Due to its excellent detection performance, the Multisensor is especially suitable for applications where small or slow movements take place for extended periods of time, such as offices or classrooms. Since its detection sensitivity is less dependent on movement direction than that of most PIR sensors, fewer units are required to reliably cover a target area.
• Excellent detection performance through high sensitivity and multidirectional coverage
Product family features
A light sensor, which provides a bright-out function: it can be programmed in Designer to switch off the lights when the natural light rises above a predefined illuminance threshold.
• Suitable for applications with very high ceilings
• Protected against dust and water (IP65)
The unit can be mounted into a ceiling void or onto a solid surface using Helvar’s SBB-C (white) or SBB-CB (black) mounting box (sold separately).
Touch DIM light and presence sensor for LEDset interface connection
Presence Detection Coverage at 15 m Height
Product family features
Touch DIM light and presence sensor for LEDset interface connection
• Programmable bright-out control for energy efficiency*
• Simple connection and integration into a Helvar DALI control network.
Key Features
Can also be used purely as a light sensor or purely as a presence sensor
• Programmable in Designer and Toolbox
* Bright-out function is available only on a lighting router system.
• Excellent detection performance through high sensitivity and multidirectional coverage
• Programmable constant light control for energy efficiency
• 10 mA DALI current consumption
Can also be used purely as a light sensor or purely as a presence sensor
Presence Detection Coverage at 7.5 m Height
• Compact and functional design
• Programmable in Designer and Toolbox
