DIY Tips for Cleaning Gum from Your Property
Bubble gum stuck in your driveway is one of the worst problems one can face. It always gives an untidy impression about your home. However, people thought no one could save them from this problem, apart from Palm Beach Gardens pressure washing companies. And it is not everyone’s cup of tea to bring these professionals to remove chewing gum from your parking lot or sidewalk. So, here are some DIY methods that can help you remove these bubble gums even from your carpets without these professionals. Check them below for more. Get cold Gum may frequently be eliminated from the carpet by freezing. Gum becomes extremely hard and brittle when it is frozen, like most other frozen objects. When the gum is frozen, it will shatter into fragments when scraped with a plastic putty knife, gum scraper, or another security tool. You might need to use an oil/grease/tar-type solvent to spot clean the area after removing and vacuuming the gum to get rid of any last-minute residue or stains. Get warm A hairdryer can also be used to get gum out of the carpet. To soften the gum, apply heat from the hair drier. When you peel the softened gum away from the floor, it should adhere to a cleaning cloth or plastic bag and separate from the carpet fibers. Be prepared to repeat this process several times until the gum has been eliminated. Move cautiously to protect the carpet’s fibers. Use chemistry A gel-based solution, including oil, grease, glue, and tar remover, is the recommended option for bubblegum removal, particularly if the spot is older. Directly apply the gel to the chewing gum, spot, or stained area. After five minutes, massage the gel into the gum to take it from the carpet fibers using a gum scrape tool, plastics putty knife, or another secure scraping tool. Never remove gum with a metal putty knife or any sharp object because the fibers of the carpet may be harmed by the edge. Hire professionals from Palm Beach Gardens pressure washing for the best results.