Canon manufactures a wide range of printers for every individual including a household user to the business purpose. Canon printers are built with lots of beneficial features and different versions, but they are likely to exhibit some technical issues and errors normally as other automated devices. Canon “MP140 Series” is more prone to some issues and one of the most common errors appears in the printer is “5100” error. To deal with the error code, it is advisable to call on our Canon Printer Support Number, where you will have instant help from the experts.
There are the numbers of reasons behind the error but the most common reasons for the error might be –if the printer is seated incorrectly or there is some wrapping tape inside the printer. Try to follow the solution mentioned below to fix the error “5100” on your own.
The purge cap may be not lubricated correctly. Lubricate the sliders with some white grease, this will help to repair probably to remove the right panel off of the printer to gain access to the purge mechanism. Clean the timing strip: there is a thin plastic strip running across the width in front of and below the drive belt: there are fine black vertical lines on this strip. If the strip gets a piece of crud on it, then there will be an error appears at the start-up sequence. Softly clean this strip with a soft or clean cloth or tissue.
See if the above-stated solution steps help you to overcome the error code. In case the error still persists then you should take help from the experts and technical specialist by dialing a toll-free Canon Printer Technical Support Phone Number – (+1-800-439-2178). The number is available 24*7/365 days for the customers so that they can connect us easily.