Specialist Gloves - Chainsaw, Impact & Anti Vibration A290
Oak Chainsaw Protective Glove (Class 0) EN 420, EN 388, EN 381-7 AS/NZS 2161 .2 , AS/NZS 2161 .3
Designed to offer maximum protection and comfort whilst performing chainsaw tasks. Protective material in the left glove only to EN381-7 Class 0, 16m/s. 60% Full-Grain Leather, 25% Polyester, 10% Polyethylene, 5% Elastic Orange L/9-XL/10
Oak Chainsaw protective clothing available on pg 258 96 12
EN388 2003
EN381
3.1.2.3. CLASS 0
A790
Anti Vibration Glove
EN 420, EN 388, EN 10819 ANSI/ISEA 105 - 2011 AS/NZS 2161 .2 , AS/NZS 2161 .3 Specially designed to reduce the effects of impact and vibration. Excellent levels of comfort and dexterity when using powertools, jack hammers, concrete breakers etc. 50% Cotton, 45% Nylon, 5% Rubber Chloroprene Black M/8-XL/10
10
100 10
EN388 EN ISO 10819 2003
X.3.4.3
A795 A796
TRM=0.62 TRH=0.55
Cut Level 4
Hammer-Safe Glove (Right) - Latex Hammer-Safe Glove (Left) - Latex EN 420, EN 388 AS/NZS 2161 .2 , AS/NZS 2161 .3
Special construction around the thumb crotch and index finger area adds shock absorbent impact resistance. This item is ideal for hammering nails/stakes and any similar activities. A795 (Right)- For use by right handed people, protective area is on the left glove. A796 (Left)- For use by left handed people, protective area is on the right glove. Polycotton, Latex Grey L/9-XL/10
13
100 10
EN388 2003
3.1.3.1
Designed for Specialist Tasks PW17_GLOVES_1_MASTER.indd 431
431
29/07/2017 14:08 13:23