THE BOEING CENTURY
H12 July 2016 Sound Publishing
In 1959, 4 people died in 707 crash near Oso
Come in and try one of our new Lite Lunch Combos!
We’ll get ya in and fed in no time!
By Steve Powell Marysville Globe Writer
If you like bland fin you’ll hate our Hapger foods, py Hour. Otherw ise … lookin’ forward to seein’ ya!
HAPPY HOUR: 3 – 6 pm Food & Drink Spe cials!
F ly on in for
a
Free Appetizer
with purchase of any entrée One per table.
Ask about our Catering Menu and large party reservations! P r iv a t e D in in g Everett only
1608128
FEDERAL WAY - 34902 Pacific Hwy S. • 253-874-6000 RENTON - 225 SE 7th St., Renton • 425-227-6881 EVERETT - 11731 Airport Road • 425-265-1770 6
jimmymacsroadhouse.com
OSO — With all the flights Boeing has had over the years, only one commercial jet has crashed in Washington — at Oso in 1959. In late October of that year, a $5 million Boeing 707 was taking a test flight with four representatives from Braniff Airways aboard. The plane was flown by Boeing test pilot Russell H. Baum and Braniff pilot Capt. John A. Berke, according to the accident report released by Civil Aeronautics Board in June 1960. Baum was instructing Berke, who was making his first training flight, CAB investigators wrote. During the flight, investigators wrote, maneuvers by the pilots pushed the aircraft beyond its limits, and three of the four engines were torn off by the force. Witnesses on the ground said “they saw three objects fall out of the overcast,” the report said. Later, “these objects were located and proved to be engines Nos. 1, 2, and 4.” Passengers on the plane and witnesses on the ground said a serious fire was burning where the No. 2 engine had been, investigators wrote. As Baum worked to control the plane and circled in search of a place to land, four of the men aboard retreated to ditching positions in the tail of the 707: William Allsop, 41, a Boeing test pilot; William Huebner, a Federal Aviation Administration inspector; Fred Symmank, a Braniff technical instructor; and Al Krause, a Braniff
COURTESY OF RON PALMER
The tail section of a Boeing 707 sits on a sandbank in the North Fork Stillaguamish River on Oct. 19, 1959, after the plane crashed and broke apart.
flight engineer. The plane descended toward an open field that “had undoubtedly been selected by Baum for the crash landing,” investigators wrote. But the plane struck treetops along the North Fork Stillaguamish River, which cut off a portion of its left wingtip. The plane crashed in the riverbed about half a mile from the field, investigators wrote. The front section of the plane was largely destroyed by the impact and a subsequent fire. The tail, where Allsop, Huebner, Symmank and Krause had ridden out the crash, broke off and veered into the river, where it came to rest on a sandbank, badly damaged but intact, the report said. Four people aboard the plane were killed: Baum, 32, of Bellevue; Berke, 49; George C. Hagen, 28, of Renton, a Boeing flight engineer; and Capt. Frank Staley, 43, a Braniff pilot. The four men in the tail survived. According to a Marysville Globe newspaper
account, the survivors crawled through an escape hatch, waded through waist-deep water, climbed the riverbank and walked to a nearby farm, where they called Boeing. The four men, all injured, were taken to the hospital. According to the Globe account, Anton Ostler, who owned 20 acres of property where the jet crashed, said he heard rumbling and thunderous noises as the plane came down, shaking the ground. Numerous smaller explosions were reported after the crash. Debris was spread over a wide area, and a few trees were burning in the dense woods. Those involved in the rescue and investigation were: then-Snohomish County Coroner Ken Baker; thenSheriff Bob Twitchell with a rescue unit; Al Williams of Stanwood and his Civil Defense unit; Washington State Patrol Sgt. J. Harvey and Lt. Webb Slone; and a fire crew from the naval station at Jim Creek.
CONGRATULATING THE BOEING COMPANY ON 100 YEARS OF INNOVATION
WE ARE PROUD TO BE THE FIRST SUPPLIER OF PLASTIC PARTS TO THE BOEING COMPANY AEROSPACE
DEFENSE
MEDICAL DEVICES
COMMERCIAL & INDUSTRIAL
FULL PRODUCT LIFE-CYCLE SOLUTIONS PROVIDER Vaupell designs, engineers, and produces custom, high performance engineered plastic and composite components and assemblies for demanding applications. We are the global market leader in plastics components and assemblies for aircraft interiors while also serving the broader aerospace, defense, medical, and commercial markets. Vaupell provides engineered solutions to top tier OEM’s, market-leading growth companies, and promising start-ups. Collaboration with our customers in all phases of a the product life cycle results in the highest value solutions that reduce time to market, manage risk and control costs. 1630949
1144 NW 53rd, Seattle, WA 98107 | 206-784-9050 | www.vaupell.com