Manage: Remote Operated Battery Switches (motorized)
Remote Operated Battery Switches Due to the increased load requirements and large increases in the cost of copper battery cable, the MD range of battery switches allows you to install the battery switch very close to the battery, reducing cable lengths to the starter motor. They are also ideal for remote isolation of bow thrusters. The 720-MDO has been enhanced to
include internal optical sensors providing even more operational functionality to this innovative master switch. Remote operation Battery switch can be mounted alongside battery, reducing cable lengths and cable sizes to starter motor. (Large cost saving in copper cables) Reduced installation labor, due to shorter battery cable runs Manual override option to meet CE requirements Power Draw: Switch off: 12mA. Switch on: 15mA, switch operating 120mA for 3 seconds @ 12V nominal
Optical sensor benefits (720-MDO only) Can be used to switch in positive or negative lines Low stand by current draw (7mA) (zero if aux control switch used. See instruction sheet) Main contacts isolated from control circuit allowing operation via another battery source
720-MDO
control switch mounting options as standard BEP™ battery switches Uses same interchangeable labeling system as BEP™ battery switches (136)
701-MD
Specifications - All recessed or surface mount, tin-plated copper studs & nuts, ignition-protected Item # 701-MD 720-MDO
in LxWxH 2.7"x2.7"x4" 4"x4"x4.33"
mm LxWxH 68x68x101 mm 102x102x110 mm
Rating (A DC) Voltage Continuous Intermittent Cranking (V DC) 275 455 1250 9.5–32 500 700 2500 9.5–32
Stud size Function Studs x (in/mm) On/Off 2 x (3/8" / 10 mm) On/Off 2 x (1/2" / 12 mm)
Terminal Link Kits (TLK's) Now available for the 701 and 720 size switches, the TLK's allow for cable connections to be made outside of the body of the switches. Image not available yet. Item # 80-708-0017-00 701-MD Item # 80-708-0013-00 720-MDO
Wireless Remote Control You can now wirelessly operate your BEP™ motorized battery switches from a distance of up to 250 feet (80 meters) away Control up to 4 separate 5A circuits; eg, 701-MD/720-MDO battery switches, anchor light, navigation lights, and courtesy lights No more lifting hatches to turn on battery switches — it’s now all controlled from the remote key fob Control battery switches easily (On/Off) from the dock Remote has a rolling code, for security
Remote On/Off Key Switch For the remote operation of the 701-MD and 720-MDO battery switches (above). It can be mounted standalone or within the Contour Connect panel range. Item # 80-724-0006-00
Item # 80-911-0045-00
96
Manage.indd 96
toll free 800.307.6702
MASTERVOLT | mastervolt.us
MARINCO | marinco.com
9/28/11 12:47 PM