Multi-point Full Body Bottom Cake Discharge The pharma and fine chemicals manufacturing sectors have to face the challenge of impurities below PPM (parts per million) levels. A clean centrifuge is a must. ACE offers full dome opening machines in its entire range of basket sizes. The simplicity of the bottom discharge arrangement is also taken care of. The multi-point full body bottom cake discharges without sweepers, the hydraulic scraper, the cake sensor, the zero speed interlock, the safety switches, the anti-vibration tripper, the DIN pressure test for air-tight operation, nitrogen purging with oxygen analyser, the GMP version, are all a part of the ACE bottom discharge centrifuge.
For more information, please contact:
Separation of Powders & Liquid Slurries The Finex Ultima offers large movements in capacity, accuracy, noise levels and upgradeability over spring separators. These high performance separators offer a costeffective solution to any requirement, including sizing, scalping, safety screening, dewatering, and grading or product recovery. It improves product quality through accurate particle size separators; increases productivity with higher capacities, and improves operator health and safety by lowering noise levels. They are available in sizes 750, 1,000, 1,200 and 1,500 mm.
For more information, please contact:
ACE Industries (India) Pvt Ltd 118 Alpha Indl Estate Marol Military Road, Andheri (E) Mumbai 400 059 Tel: 022-42258000 E-mail: ace_centrifuges@yahoo.co.in
Russell Finex Pvt Ltd A-1201 Rustomjee Adarsh Regal Adarsh Vihar Complex, Off Marve Road Malad (W), Mumbai 400 064 E-mail: sales.rfsf@russellfinex.com
Integrated Wet Granulation Line Prism integrated granulation lines as per current GMP requirements is fully contained during processing to protect operators and environment. Also improves productivity through closed materials transfer, automation, increase yields and efficient cleaning procedures. An integrated granulation line for solid dosages is available from 2 to 1,200 litre working capacity; closed process technology for grading, mixing, granulating, drying, milling, blending and tabletting; reduced amount of transfer operation; better containment for highly potent materials; materials transfer by vacuum transfer system; and sophisticated PLC controls with HMI touch screen. For more information, please contact: Prism Pharma Machinery Plot No: 3713, Phase IV GIDC, Vatva, Ahmedabad Gujarat 382 445 Tel: 079-29096204 Fax: 91-079-25841623 E-mail: mkt@prismpharmamachinery.com sales@prismpharmamachinery.com
Pharma Bio World
August 2018 â–ş 39