3 4 . WM S S TOCK R E TU R N S PROC ES S This allows you to scan the product back into the location you are putting it away in, therefore also capturing the return use by date and adding the stock back into the WMS. This is done by following the procedure. 34.1. Gun process: 34.1.1.
Select the stock returns option
34.1.2.
Collect the driver stock returns
34.1.3. Scan the product barcode or key in SKU, or use your “S” search functions, and then enter depending on what process you used 34.1.4. Once product is scanned the screen will display the product’s description and its pick face location 34.1.5.
Scan the location you are returning the stock to
If this is not the products pick face, a pop up will appear “Not item P/face. Continue Yes,
No, cancel”
34.1.6. Enter the quantity being returned in cartons and units, and then enter. If random weight then this follows the same process as receivals and pick 34.1.7.
Enter the products best before, use by or packed date, and then enter If the product has expired a pop up will appear “Item expired cannot return”, anything with more than 1 day’s life it will not
NOTE: If the product has expired or is close to expiry then put in your isolate area 34.1.8. Enter the GRS this was brought back on, and then enter (process still being determined on this, so enter on this field) 34.1.9.
Continue with your next product return
34.1.10. When finished send to complete, a pop up will appear “is task complete? No, Yes, Cancel” select the required option and enter The full procedure for WMS stock returns process can be found on PFD Connect.
33