TURBO MANUFACTURER OF ENGENEERED PRODUCTS
INSTRUCTIONS
TIP SELECTION GUIDE
WHAT TO CONSIDER WHEN YOU’RE CHOOSING TIPS BUCKET ALL TURBO BUCKET TIPS ARE MADE FROM ONE OF TWO SPECIAL STEEL ALLOYS: F2 , which resists softening in applications that generate high heat. F4 , which is through-hardened to provide consistently low wear rates throughout the life of the tip.
STRENGTH:
The ability to withstand digging and penetrating shocks and high breakout forces
PENETRATION:
The ability to penetrate tough material, when it’s tightly compacted,rocky or frozen
PENETRATION: PSHORT:
LONG: P
- Use in densely com pacted material such as clay.
- Use inhigh-impact and pry-out work such as rock.
- Gives maximum penetration.
- Extremely strong.
- Use in most general applications where breakage is not a problem.
- Self-sharpening.
TIPS COME IN SO MANY DIFFERENT SHAPES AND SIZES, YOU MIGHT THINK IT TAKES AN EXPERT TO PICK THE RIGHT ONE. NOT SO. IT CAN ALL BE REDUCED TO A FEW SIMPLE GUIDELINES.
- Extremely strong.
WEAR LIFE:
The ability to withstand wearing, scouring, and abrasive action of the material being handled
HEAVY DUTY LONG:
HEAVY P DUTY ABRASION:
- se in general loading and excavation work.
- Use when working in sand, gravel and shot rock.
- Use to increase wear life and penetration. As the Heavy Duty
- Use in high-impact, hard-to-penetrate material.
- Maximum wear material.
- Long Life tip wears, ease of penetration.
- Extended wear life.
- Has extended wear Has extended wear strength.
PHEAVY DUTY LONG LIFE:
PHEAVY DUTY PENETRATION:
ROCK CHISEL: - 3 to 5 times more wear life than standard.
PAGE-04