Understanding the SRX Menu Structure
Chapter 3
Dial-up ............................................Transfer data usng SFX function (see Series SRX SFX Dial-Up Program Explanations)
3.5.1
Job The Job option is used to perform the following tasks, which are further discussed in Chapter 4, Survey Jobs:
3.5.2
•
Select an unfinished job from a list
•
Start a new job
•
Rename a job
•
Display the statistics of a job
•
Mark a job as a control job
Instrument The instrument screen displays information about the instrument and gives you access to various parameters.
The Instrument Setup fields display the following information: Model ..............................................The type of instrument. EDM desc .......................................(information only) The type of EDM, which transmits in the instrument record. EDM S/N ........................................(information only) The six-digit numeric field for the EDM serial number, which transmits in the instrument record. V.obs................................................The vertical observation selector field displays if the instrument has more than one way of measuring its vertical angle. Zenith - angles are measured with the upward vertical representing 0°, and Horiz - angles are measure upwards from horizontal representing 0°. Orient..............................................Controls the setting of the horizontal circle at the time of a backsight reading. Zero automatically sets the horizontal to zero; averaged F1/F2 values are not allowed, Azimuth automatically sets the computed azimuth; averaged F1/F2 values are not allowed, and None makes no change. Meas................................................Controls the tracking function. Set to Tracking to activate the tracking function which automatically rotates the SRX to a predetermined point during setting-out operations. When set to Standard, the SRX will operate without tracking.
SRX
3-5