IP54 protection for rotary handle
1SDC210C80F0001
Allows IP54 degree of protection to be obtained. It is available for the transmitted rotary handle operating mechanism on the compartment door (RHE) for all the Tmax circuit-breakers.
IP44 protection for circuit breaker toggle It is installed directly on the front of the circuit breaker and it allows IP44 degree of protection.
1SDC210C81F0001
Front for lever operating mechanism – FLD This can be installed on fixed, plug-in or withdrawable Tmax T4, T5 and T6 circuit-breakers. In the case of withdrawable circuit-breakers, installed in a switchboard, it allows the IP40 degree of protection to be maintained for the whole isolation run of the circuit-breaker. It is always fitted with a padlock in the open position (6 mm Ø stem up to three padlocks - not supplied) which prevents closing of the circuit-breaker and of the compartment door, and with compartment door lock. On request, it can be fitted with a key lock in the open position. It is available in the following versions: – for fixed or plug-in circuit-breaker – for withdrawable circuit-breaker. The front for lever operating mechanism is always an alternative to the motor operator and to the rotary handle and to the display FDU. The same flange for the compartment door already supplied with the circuit-breaker or the one supplied with the conversion kit for withdrawable version can be used.
1SDC210C82F0001
Padlock for operating lever – PLL
1SDC210C83F0001
This is applied to the T1 - T2 - T3 circuit-breaker cover to prevent the lever closing or opening operation. It allows installation up to a maximum of three padlocks - 7 mm Ø stem (not supplied). It is available in the following versions: – plug-in locking device only of the closing operation – locking plate on the closing and opening operation according to the assembly position. The lock on the opening operation does not prevent release of the mechanism following a fault or remote control command – locking plate just for the closing operation. It is incompatible with the front accessories: solenoid operator, rotary handle operating mechanism and mechanic interlock. The padlock is also available for T7 and it is directly mounted on the circuit-breaker cover.
1SDC210C84F0001
T1-T3
T1-T3
3/31 1SDC210015D0206
3