Screen Print Materials Brochure

Page 1

Graphic Products

Screen Print Materials

Engineered to Perform Better™


ORAFOL’s Headquarters

A dedication to quality is a source of pride for all of us at ORAFOL and it is a key factor in our continued growth and success. Dr. Holger Loclair Managing Director, ORAFOL Europe GmbH


Index Screen Printing Materials Find the right solution for your application needs The ORAFOL line of screen print products include ORACAL®, ORALITE® and ORALUX®. Our team of product application experts can assist you in selecting the perfect material for your application, taking into consideration variables such as application method, substrate type, duration and durability requirements.

Page

List of contents

5 ORACAL® 751

High Performance Cast Film

5 ORACAL® 651

Intermediate Calendered Film

5 ORACAL® 341

Promotional Calendered Film

6 ORACAL® 1640ht

High-Tack Print Vinyl

6 ORACAL 640

Print Vinyl

6 ORACAL® 620

Print Vinyl

7 ORACAL® 301F

Print Polyester

7 ORACAL 352

Print Polyester

7 ORAJET® 1740

Eco Print

8 ORALITE® 5700

Engineer Grade Premium

8 ORALITE® 5500

Engineer Grade

8 ORALITE 5650ra /5600

Fleet Engineer Grade with RapidAir® Technology

Fleet Engineer Grade

®

®

®

9 ORALITE® 5400

Commercial Grade

9 ORALITE 5300

Commercial Grade

9 ORALITE® V98

Conformable Graphic Sheeting

10 ORACAL® 7510/6510

Fluorescent Premium Cast

Fluorescent Cast

®

10 ORALUX 9300

Luminescent Cast

10 ORACAL® 820

Safety Vinyl

®

Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.

11

Notes on Processing and Handling

12-15

Product Overview – Printing Materials


“

ORAFOL products are sold in more than 100 countries worldwide.


Printing Materials · Marking Films

ORACAL® 751 High Performance Cast Designed for lettering, marking and decorative elements with the highest durability and conformability requirements. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

2 mil

Up to 8 years

Silicone-coated paper, 84# Blue liner for white

Solvent Polyacrylate, Permanent

78 Colors + Transparent

Gloss

(010 and 070 available in gloss & matte)

ORACAL® 651 Intermediate Cal The industry standard in intermediate calendered film for medium-term indoor and outdoor lettering, marking and decoration. Special proprietary formulation ensures optimized stability and resistance to UV degradation. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

2.5 mil

Up to 6 years

Silicone-coated paper, 84# Blue liner for white

Solvent Polyacrylate, Permanent

60 Colors + Transparent

Gloss

(010 and 070 available in gloss & matte)

ORACAL® 341 Promotional Cal Ideal for short-term lettering, markings and decorations. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

3 mil

Up to 3 years

Silicone-coated paper, 84#

Polyacrylate dispersion, Permanent

21 Colors + Transparent

Gloss

Typical application examples for ORACAL® 751 and ORACAL® 651

Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.

ORACAL® 751

ORACAL® 651

Engineered to Perform Better™    www.orafolamericas.com

5


Printing Materials

ORACAL® 1640ht High Tack Print Vinyl Short- to medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited. High initial-tack adhesive is perfect for low-energy surfaces. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

4 mil

3 years

Silicone-coated paper on one side, 90#

Polyacrylate, Permanent; High initial-tack

000 Transparent 010 White

Gloss Matte

ORACAL® 640 Print Vinyl Short- to medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

3 mil

3 years

Silicone-coated paper on one side, 90#

Polyacrylate, Permanent

000 Transparent 010 White

Gloss Matte

ORACAL® 620 Print Vinyl Short- to medium-term outdoor applications such as markings, inscriptions and decorations. Indoor exposure is almost unlimited. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

3 mil

3 years

Silicone-coated paper on one side, 90#

Polyacrylate, Removable

000 Transparent 010 White

Gloss Matte

ORACAL® 1640ht

6

www.orafolamericas.com    Engineered to Perform Better™

ORACAL® 640

Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.


Printing Materials

ORACAL® 301F Print Polyester Perfect indoor/outdoor metallized or white polyester film for short- to medium-term applications such as markings, inscriptions and decorations. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

2 mil

2 years

Silicone-coated polyester film on one side, 4 mil

Polyacrylate, Permanent

010 White | 001 Chrome, 907 Brushed Chrome

Gloss

ORACAL® 352 Print Polyester For decorative labels, name and technical plates, decorative elements and moldings and safety decals. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

1 mil

Up to 2 years

PE-coated Silicone paper, 98#

Solvent polyacrylate, 000 Transparent | 010 White Permanent 001 Chrome | 907 Brushed Chrome | 911 gold-coated | 002 Matte Chrome | 003 Gold Gloss

Gloss

ORACAL® 1740 Eco Print Polyolefin-based film for environmentally-conscious short- and medium-term outdoor advertising. Indoor exposure is almost unlimited. Special topcoat for improved printing. Thickness

Durability

Release Liner

Adhesive

Colors

Finish

3.5 mil

2 years

Silicone-coated paper on one side, 83#

Polyacrylate, permanent

000 Transparent 010 White

Gloss

Typical application examples for ORACAL® 1740 and ORACAL® 301F

ORACAL® 352

ORACAL® 1740

ORACAL® 301F

Engineered to Perform Better™    www.orafolamericas.com

7


Printing Materials · Reflective Materials

ORALITE® 5700 Engineer Grade Premium For the manufacture of traffic control, guidance, warning, information signs and reflective lettering, numbers and symbols. Intended for long-term outdoor use. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness

Durability

Release Liner

Adhesive

Colors

5 mil

7 years

PE-coated paper, 89#

Solvent polyacrylate, permanent

8 Gloss Colors

ORALITE® 5500 Engineer Grade For the manufacture of traffic control, guidance, warning, information signs and reflective lettering, numbers and symbols. Intended for long-term outdoor use. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness

Durability

Release Liner

Adhesive

Colors

4.25 mil

7 years

PE-coated paper, 89#

Solvent polyacrylate, permanent

8 Gloss Colors

ORALITE® 5650ra /5600 Fleet Engineer Grade with RapidAir® Technology/ Fleet Engineer Grade For vehicle graphic applications to produce reflective lettering, markings and decorations. Intended for applications over corrugations and rivets. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness

Durability

Release Liner

Adhesive

Colors

5 mil

7 years

PE-coated paper, 89#

Solvent polyacrylate, permanent

5650ra- 11 Gloss Colors 5600- 14 Gloss Colors

ORALITE® 5700

8

www.orafolamericas.com    Engineered to Perform Better™

ORALITE® 5500


Printing Materials · Reflective Materials

ORALITE® 5400 Commercial Grade For the manufacture of guidance, warning, information signs and reflective lettering, numbers and symbols. Meets ASTM D 4956 specifications for Type I, Class 1 retroreflective sheeting. Thickness

Durability

Release Liner

Adhesive

Colors

3.5 mil

4 years

PE-coated paper, 89#

Solvent polyacrylate, permanent

6 Gloss Colors

ORALITE® 5300 Commercial Grade For the manufacture of traffic control, guidance, warning, information signs and reflective lettering, numbers and symbols which when being used do not have to comply with any national specification for retroreflectivity. Thickness

Durability

Release Liner

Adhesive

Colors

3.5 mil

7 years

PE-coated paper, 89#

Solvent polyacrylate, permanent

6 Gloss Colors

ORALITE® V98 Conformable Graphic Sheeting Ideal for application on ambulances, police, fire and other EMS vehicles. Thickness

Durability

Release Liner

Adhesive

Colors

13-18 mil

5 years Colors 3 years Fluorescents

Polycoated paper, 76#

Solvent polyacrylate

15 White, 18 Yellow, 12 Red, 27 Green, 23 Blue, L1 Fl. Yellow, L2 Fl. Lime, L3 Fl. Orange

Typical application example for ORALITE® 5400

Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.

ORALITE® 5400

ORALITE® 5300

Engineered to Perform Better™    www.orafolamericas.com

9


Printing Materials · Specialty Films

ORACAL® 7510/6510 Fluorescent Premium Cast/Fluorescent Cast Designed for short-term graphics that require high-impact visibility such as vehicle and bus advertising, POP displays, labels, decals and retail applications. Thickness

Durability

Release Liner

Adhesive

Colors

7510- 6 mil 6510- 4-mil

7510– 2 years 1 year Pink & Orange 6510– 1 year 6 mo. Pink & Orange

Silicone-coated paper, 84#

Solvent polyacrylate, permanent

6 Gloss Colors

ORALUX® 9300 Luminescent Cast Great for indoor safety and emergency exit signage in buildings, cruise ships, and airplanes. Thickness

Durability

Release Liner

Adhesive

Colors

6 mil

5 years

PE-coated silicone paper, 90#

Solvent polyacrylate, permanent

Off White

(indoor only)

ORACAL® 820 Safety Vinyl Designed for tamper-evident applications. This film can only be removed in small pieces to prevent fraudulent handling of decals, labels and other markings. Thickness

Durability

Release Liner

Adhesive

Colors

2 mil

5 years

PE-coated paper, 91#

Solvent polyacrylate, permanent

White Gloss & Matte

ORALUX® 9300

10

www.orafolamericas.com    Engineered to Perform Better™

ORACAL® 820

Standard sheet sizes 27" x 38" or 30" x 38". All products are available as rolls.


Notes on Processing and Handling 1. Preliminary remarks The following general tips are given for application of ORAFOL® Screen Print Products. For more information on printable media for vehicles, please visit www.orafolamericas.com. 2. Storage ORACAL® printing films should be stored in a cool dry place protected from sunlight. Material delivered in rolls must either be suspended or stand on-end with the provided roll end caps. ORAFOL® recommends storing sheet form products in their original packaging flat on a shelf or pallet. Prior to processing, the self-adhesive films should be acclimated to the humidity and temperature conditions of the processing area. Ideal humidity should be between 50% and 55% and temperatures between +68°F to +72°F. See table below for general guidelines to allow material to adjust properly to the processing humidity and temperature. Number of sheets per stack

Temperature difference between sheets and processing area ± 41°F

±50°F

±59°F

250

3 hours

6 hours

10 hours

1500

4 hours

9 hours

15 hours

3. Cutting It is important to use a clean, sharp knife when cutting ORAFOL® printing films. A clean knife prevents any buildup of adhesive residue which could be deposited on the edge of the sheet. The clamping balls should apply as little pressure as possible during cutting. 4. Printing Use only printing ink systems recommended by the ink manufacturer for the self-adhesive material being processed. During multicolor printing, always ensure that each layer of ink has thoroughly dried before the next is applied. There is a direct relationship between dimensional stability and register accuracy during printing. Tunnel drying alters the moisture content of the cover paper and the dimensional stability of the film itself may be affected. To ensure register accuracy in multicolor prints, we recommend passing the self-adhesive material once through the printing machine and the tunnel dryer prior to printing.

Wavey edges or plating of the self-adhesive material can always be traced to excessively dry or moist conditions within the processing areas. Constant ambient conditions should be maintained both day and night. A large reduction in temperature promotes wavey edges. If you wish to protect the print with a finishing coat of clear enamel, please be aware that solvents may cause brittleness of the material and that shrinkage may occur during drying causing the film edges to detach from the carrier paper or from the surface to which the film is applied. Compatibility should therefore be tested prior to printing. 5. Application ORAFOL® screen print products should be applied to clean and dry surfaces free of oil, grease, solvents, silicone or other contamination. To avoid potential issues thoroughly clean the substrate before application. Also, allow oven dried or baked paints to outgas for three weeks prior to application. To avoid undesirable temporary whitening in wet application on transparent surfaces, we recommend the use of printing films equipped with solvent polyacrylate adhesive. For more information on proper car application methods, please refer to our product support documents on our website www.orafolamericas.com. Caution! Certain high thermal insulation double glazing systems may be damaged by self-adhesive stickers due to stress caused by extreme temperature fluctuations. 6. Removability Please review individual product technical sheets for adhesive type and areas of use. This information is based on our knowledge and experience. Specialized or occupational knowledge and competence of a professional sign maker are presupposed. Due to the diversity of potential influencing factors during application and use, we recommend customers test our products first. No legally binding warranty of certain qualities can be derived from our information.

Engineered to Perform Better™    www.orafolamericas.com

11


Product Overview – Screen Printing Materials

Product

ORACAL® 751

Description

High Performance Cast Film

Front Material (without paper and adhesive)

Cast PVC film, 2 mil

Release Paper

84# silicone-coated paper

Adhesive

Colors

(FINAT-TM 14)

Solvent polyacrylate, permanent

78 Colors + Transparent (Gloss) 010 & 070 also

Adhered to steel, no shrinkage in cross direction; in length, <.006"

60 Colors + Transparent (Gloss) 010 & 070 also

Adhered to steel, no shrinkage in cross direction; in length, <.016"

available in matte

ORACAL® 651

Intermediate Calendered Film

Calendered PVC film, 2.5 mil

84# silicone-coated paper

Solvent polyacrylate, permanent

available in matte

12

ORACAL® 341

Promotional Calendered Film

Calendered PVC film, 3 mil

84# silicone-coated paper

ORACAL® 1640ht

Print Vinyl

Soft PVC film, 4 mil

ORACAL® 640

Print Vinyl

ORACAL® 620

Dimensional Stability

21 Colors + Transparent (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, <.019"

90# Polyacrylate, silicone-coated permanent paper on one side

White and Transparent (Gloss/Matte)

Adhered to steel, no shrinkage in cross direction; in length, <.016"

Soft PVC film, 3 mil

90# Polyacrylate, silicone-coated permanent paper on one side

White and Transparent (Gloss/Matte)

Adhered to steel, no shrinkage in cross direction; in length, <.016"

Print Vinyl

Soft PVC film, 3 mil

90# Polyacrylate, silicone-coated removable paper on one side

White and Transparent (Gloss/Matte)

Adhered to steel, no shrinkage in cross direction; in length, <.016"

ORACAL® 301F

Print Polyester

Print polyester, 2 mil

4 mil Polyester film, silicone-coated on one side

Polyacrylate, permanent

Chrome, Brushed Chrome and White (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, <.008"

ORACAL® 352

Print Polyester Film

Print polyester 1 mil

98# PE-coated paper on both sides

Solvent polyacrylate, permanent

White and Transparent (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, <.004"

ORACAL® 1740

Eco Print

Polyolefin film 3.5 mil

83# Polyacrylate, silicone-coated permanent paper on one side

White and Transparent (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, 0.016"

ORALITE® Engineer Grade 5700 Premium

Reflective film, 5 mil

89# PE-coated silicone paper

Solvent polyacrylate, permanent

8 colors (Gloss)

N/A

ORALITE® Engineer Grade 5500

Reflective film, 4.25 mil

89# PE-coated silicone paper

Solvent polyacrylate, permanent

8 colors (Gloss)

N/A

www.orafolamericas.com    Engineered to Perform Better™

Polyacrylate dispersion, permanent


Temperature Resistance

Adhesive Power (FINAT-TM 1, after 24 hrs.)

Print Compatibility

Tensile Strength

Elongation at Break

(DIN EN ISO 527)

(DIN EN ISO 527)

along

across

along

across

Minimum Life Expectancy (Not printed)

Minimum Application Temperature

1

Adhered to aluminum, -58°F to +230°F, no variation

Adhered to stainless steel, 4.1 lb./in.

Thermal Transfer (gloss finish only)

Min. 19 MPa

Min. 19 MPa

Min. 120%

Min. 120%

Up to 8 years

46ºF

Adhered to aluminum, -40°F to +176°F, no variation

Adhered to stainless steel, 4.1 lb./in.

Thermal Transfer (gloss finish only)

Min. 19 MPa

Min. 19 MPa

Min. 130%

Min. 150%

Up to 6 years

46ºF

Adhered to aluminum, -40°F to +158°F, no variation

Adhered to stainless steel, 3.4 lb./in.

Thermal Transfer

Min. 17 MPa

Min. 17 MPa

Min. 120%

Min. 140%

Up to 3 years

50ºF

Adhered to aluminum, -40°F to +176°F, no variation

Adhered to stainless steel, 5.02 lb./in.

Screen Printing Flexo and UV-offset printing (special inks

Min. 19 MPa

Min. 19 MPa

Min. 130%

Min. 150%

3 years

50ºF

Adhered to aluminum, -40°F to +176°F, no variation

Adhered to stainless steel, 3.65 lb./in.

Screen Printing

Min. 19 MPa

Min. 19 MPa

Min. 130%

Min. 150%

3 years

Adhered to aluminum, -40°F to +176°F, no variation

Adhered to stainless steel, 1.37 lb./in.

Screen Printing

Min. 19 MPa

Min. 19 MPa

Min. 130%

Min. 150%

3 years

N/A

Adhered to stainless steel, 5.7 lb./in.

Screen Printing UV-offset printing

Min. 200 MPa

Min. 260 MPa

Min. 125%

Min. 80%

2 years

> 46ºF

Adhered to aluminum, -40°F to +248°F, no variation

Adhered to stainless steel, 2.7 lb./in.

Screen Printing UV-Offset printing

Min. 200 MPa

Min. 260 MPa

Min. 125%

Min. 80%

2 years

46ºF

Adhered to aluminum, -40°F to +158°F, no variation

Adhered to stainless steel, 2.74 lb./in.

Screen Printing UV-Offset printing

Min. 38 MPa

Min. 38 MPa

Min. 130%

Min. 150%

2 years

> 50ºF

Min. 110%

Min. 120%

Adhered to aluminum, -68°F to +179°F, no variation

Adhered to stainless steel, 3.43 lb./in. film tear

Screen Printing

N/A

N/A

N/A

N/A

7 years

> +50ºF

Adhered to aluminum, -68°F to +179°F, no variation

Adhered to stainless steel, 3.42 lb./in. film tear

Screen Printing (ORALITE® 5018 is recommended)

N/A

N/A

N/A

N/A

7 years

> +50ºF

(dry application)

required)

32ºF (dry application)

32ºF (dry application)

Engineered to Perform Better™    www.orafolamericas.com

13


Product Overview – Screen Printing Materials

Product

Description

Front Material (without paper and adhesive)

Release Paper

Adhesive

Colors

(FINAT-TM 14)

ORALITE® Fleet Engineer 5650ra Grade with RapidAir® Technology

PVC reflective film, 4.25-5.5 mil

89# PE-coated silicone paper

Solvent polyacrylate, permanent

11 colors (Gloss)

N/A

ORALITE® Fleet Engineer 5600 Grade

PVC reflective film, 5 mil

89# PE-coated silicone paper

Solvent polyacrylate, permanent

14 colors (Gloss)

N/A

ORALITE® Commercial Grade Reflective film, 5400 3.5 mil

89# PE-coated paper

Solvent polyacrylate, permanent

6 colors

N/A

ORALITE® Commercial Grade Reflective film, 5300 3.5 mil

89# PE-coated silicone paper

Solvent polyacrylate, permanent

6 colors

N/A

ORALITE® Conformable V98 Graphic Sheeting

13-18 mil

76# Polycoated paper

Solvent polyacrylate,

8 colors

Adhered to steel, no shrinkage in cross direction; in length, <.063"

ORACAL® 7510

Fluorescent Premium Cast

Cast PVC film, 6 mil

84# Silicone-coated paper

Solvent polyacrylate, permanent

6 colors (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, <.012"

ORACAL® 6510

Fluorescent Cast

Cast PVC film, 4 mil

84# Silicone-coated paper

Solvent polyacrylate, permanent

6 colors (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, <.012"

ORALUX® 9300

Luminescent Cast Film

Special PVC film, 6 mil

90# PE-coated silicone paper

Solvent polyacrylate, permanent

Off white (Gloss)

Adhered to steel, no shrinkage in cross direction; in length, <.01"

ORACAL® 820

Safety Vinyl

Cast PVC film, 2 mil

91# PE-coated silicone paper

Solvent polyacrylate, permanent

White (Gloss/Matte)

No measurable shrinkage in cross direction, in length max. 0.007"

Standard sheet sizes are 27" x 38" or 30" x 38". Special sheet sizes available upon request. All products are available as rolls. 100 sheets/box (unless noted otherwise). 25 boxes/pallet (unless noted otherwise).

1

14

Dimensional Stability

With vertical external weathering (ORAFOL Americas climate zone 1)

www.orafolamericas.com    Engineered to Perform Better™


Temperature Resistance

Adhesive Power (FINAT-TM 1, after 24 hrs.)

Print Compatibility

Tensile Strength

Elongation at Break

(DIN EN ISO 527)

(DIN EN ISO 527)

along

along

across

Minimum Life Expectancy (Unprinted)

Minimum Application Temperature

1

across

Adhered to aluminum, -58°F to +203°F, no variation

Adhered to stainless steel, 3.8 lb./in. Adhered to acrylic coating, 3.9 lb./in.

Latex, Solvent, EcoSolvent, UV Curable and Screen Printing

Min. 10 MPa

Min. 10 MPa

Min. 100%

Min. 100%

7 years

59ºF

Adhered to aluminum, -58°F to +203°F, no variation

Adhered to stainless steel, 3.43 lb./in. film tear

Latex, Solvent, EcoSolvent, UV Curable and Screen Printing

Min. 10 MPa

Min. 10 MPa

Min. 100%

Min. 100%

7 years

> +59ºF

Adhered to aluminum, -58°F to +180°F, no variation

Adhered to stainless steel, 3.42 lb./in. film tear

Latex, Solvent, EcoSolvent, UV Curable and Screen Printing

N/A

N/A

N/A

N/A

4 years

50ºF

Adhered to aluminum, -58°F to +180°F, no variation

Adhered to stainless steel, 3.42 lb./in. film tear

Screen printing

N/A

N/A

N/A

N/A

7 years

50ºF

Adhered to aluminum, -40°F to +221°F, no variation

4.0 lb./in.

Latex, Solvent, EcoSolvent, UV Curable and Screen Printing

N/A

N/A

N/A

N/A

5 years Colors 3 years Fluorescents

50ºF

Adhered to aluminum, -40°F to +230°F, no variation

Adhered to stainless steel, 4.1 lb./in.

Screen printing

Min. 15 MPa

Min. 15 MPa

Min. 120%

Min. 120%

2 years 1 year- Pink & Orange

46ºF

Adhered to aluminum, -40°F to +221°F, no variation

Adhered to stainless steel, 3.5 lb./in.

Screen printing

Min. 13 MPa

Min. 13 MPa

Min. 100%

Min. 100%

1 year 6 months- Pink & Orange

46ºF

Adhered to aluminum, -40°F to +212°F, no variation

Adhered to stainless steel, 4.1 lb./in.

Screen printing

Min. 12 MPa

Min. 10 MPa

Min. 100%

Min. 100%

5 years

46ºF

Screen printing. Also suitable for inkjet printing with solventbased, UV or latex inks.

Min. 14 MPa

Min. 14 MPa

Min. 4%

Min. 4%

5 years

> +50°F

-40°F to +194°F, no variation

N/A

The statements in this information sheet are based upon our knowledge and practical experience. This data is intended only as a source of information, is given without guarantee and does not constitute a warranty. Due to the wide variety of possible uses and applications, customers should independently determine the suitability of this material for their specific purpose, prior to use.

Engineered to Perform Better™    www.orafolamericas.com

15


Graphic Products Engineered to Perform Better™

Revised 09/15 | © 2015 ORAFOL Americas Inc.     GP-SCREEN PRINT BROC     48720-SP

ORAFOL Americas - GA 1100 Oracal Parkway Black Creek, GA 31308

ORAFOL Americas - CT 120 Darling Drive Avon, CT 06001

ORAFOL Canada 2831 Bristol Circle Oakville, Ontario L6H 6X5

912-851-5000 • Fax | 912-851-5110 Toll Free | 888-672-2251

905-829-2828 • Fax | 905-829-9941 Toll Free | 888-727-3374

905-829-2828 • Fax | 905-829-9941 Toll Free | 888-727-3374

graphics-americas@orafol.com • www.orafolamericas.com