Page 1

Simpler.

Our entire Merchant Bar and Light Structural range

Stronger.

is available in 300PLUS® steel, meaning you can

Smarter.

design efficiency. So it’s easier for you to specify for

enjoy the twin benefits of extra strength and extra construction and manufacturing projects. Up to 20% Extra Strength. Because our range of Merchant Bar and Light Structurals is up to 20% stronger, you can factor in the benefits of downsizing that come with higher

Up to

mechanical properties. The improved strength to

20% Extra Strength.

weight ratios mean your constructions can save weight, as well as money. It’s Easy to Order with EzyStock®. 300PLUS® steel is available from your local stockist or distributor. The most popular sections are in our range of EzyStock® products. Everything is ready for prompt delivery to your site.

It’s Easy to

No-fuss Welding. The Welding Technology Institute of Australia (WTIA)

Order with EzyStock . ®

has classified 300 grade steel as grade 4 steel, which means 300PLUS® needs no special pre-heating for welding. It can also be readily welded with any type of welding stick electrode and with automatic and semiautomatic welding techniques. You may also like to know that compliance with the WTIA code is subject to rigid quality controls.

No-fuss Welding.

Without a doubt, 300PLUS® steel is the stronger, simpler and smarter solution to your building and manufacturing requirements.


300PLUS® Merchant Bar Products Parallel Flange Channels (PFC)

Tapered Flange Beams (TFB)

65 x 50 x 5,6,8

75 x 40

100 x 45

30 x 30 x 3,5,6

75 x 50 x 5,6,8

100 x 50

125 x 65

32 x 5,6,8,10,12

40 x 40 x 3,5,6

100 x 75 x 6,8,10

125 x 65

25

40 x 5,6,8,10,12,16,20

45 x 45 x 3,5,6

125 x 75 x 6,8,10,12

40

50 x 5,6,8,10,12,16,20,25

50 x 50 x 3,5,6,8

16

65 x 5,6,8,10,12,16,20

55 x 55 x 5,6

17

75 x 5,6,8,10,12,16,20,25

65 x 65 x 5,6,8,10

18

90 x 6,8,10,12

75 x 75 x 5,6,8,10

19

100 x 5,6,8,10,12,16,20,25

90 x 90 x 6,8,10

20

110 x 6*,8*,10,12*

100 x 100 x 6,8,10,12

22

130 x 5*,6*,8,10,12,16,20,25

24

150 x 5*,6*

27

150 x 8,10,12,16,20,25

30

180 x 6*,10*,12*

33

200 x 6*,8*,10*,12*

36

250 x 6*,8*,10*,12*

39

300 x 6*,8*,10*,12*

Rounds

Squares

Square Edge Flats (SEF)

Equal Angles

10

12

20 x 10

25 x 25 x 3,5,6

12

16

25 x 5,6,8,10,12

13

20

14 15

Unequal Angles

42 45

*Slit Flats (SLTF)

48 50 56 60 65 75 90

You can order the full range of Merchant Bar products listed above in 300PLUS®. For the full story, just call: OneSteel Direct Freecall: 1800 1 STEEL (1800 1 78335) Freefax: 1800 800 744 Email: onesteeldirect@onesteel.com Postal: Locked Bag 8825 South Coast Mail Centre, NSW 2521 Australia Web: www.onesteel.com

This publication has been prepared by OneSteel Rod, Bar & Wire (OneSteel Manufacturing Pty Limited ABN 42 004 651 325). Please note that the specifications and technical data are subject to change without notice and to ensure accuracy, users of this publication are requested to check the information to satisfy themselves and not to rely on the information without first doing so. Unless required by law the company cannot accept any responsibility for any loss, damage or consequence resulting from the use of this publication. Photographs shown are representative only of typical applications, current at February 2009. This brochure is not an offer to trade and shall not form any part of the trading terms in any transaction. © Copyright 2003-2009 OneSteel Manufacturing Pty Limited. EzyStock®‚ EzySteel®‚ and 300PLUS® are registered trademarks of OneSteel Manufacturing Pty Limited. Issue 4, February 2009 BS0183.


300Plus  

No-fuss Welding. Because our range of Merchant Bar and Light mechanical properties. The improved strength to weight ratios mean your constru...

Advertisement
Read more
Read more
Similar to
Popular now
Just for you