WWW.GOCLEAR.CO.NZ RUNNING ON SCR?... ROAD NOISE NEWS
New model MaxiCUBE – Classic Van 2
M
axiTRANS has released the new model MaxiCUBE Classic Van 2 into New Zealand markets, based on Australian changes launched in 2017 and fully tested in the field. The new design front wall and cross member in the floor reduces weight by more than 200kgs and improves thermal performance by at least 10%. It has a modular design skid plate that is easier to repair or replace. The local version is 10mm – a heavy-duty version that is easier for servicing. It has 100mm foam block insulation in the floor, and the 130mm roof and 45mm side wall insulation has fully vacuum bonded panelling. The van has 90mm rear doors with a one-piece full seal per door, and a 130mm roof as standard. The 45mm side walls have full height close 200mm gap pultrusion reinforcements over high impact zones. A reinforced rear frame coupled with stainless steel rear corner castings is better able to withstand
impact during docking. There is also a new galvanised fullwidth apron plate design for easy access when connecting/ disconnecting. Full-width apron plate improves durability at the front section of the van, and it has an improved sealing system and brighter internal LED lighting. The lighter weight (50%) double loader bars make them easier to handle (HSE impact) and they have a higher load rating than before (500kg per pallet to 670kg).