INTRODUCING

The MRS (Monchiero Remote System) allows to share data and parameters of the machine and the harvest itself, with other devices (smartphone, tablet, computers). The MRS collects information about the machines (temperatures, speed levels, location of the machine, etc.); and about its work (amount of harvested fruit, hours of work, etc.).

Checking and analyzing the shared information, it’s possible to manage the harvesters fleets, planning the work and control the situation in real time.

when product quality and efficiency matters

VL08 – Tractor Mounted Tree Shaker

The powerful hydraulic system starts with a huge gear transmission and continues with a powerful hydrostatic pump to shake even the largest shafts.

A Telescopic Arm That Makes Your Work Easier

The telescopic boom can work under the lower trees without hitting them with the tractor. At the same time it gives the ability to move forward without the need to approach and move away from the trees every time. The operator can proceed linearly stopping at each tree.

The head can move to adapt to bended tree, to avoid working on the angle of the pads, that can damage the trees. The operator doesn’t have to do that manually for every tree, because the VL08 is doing that automatically. The power level of the shaking head can be adjusted directly by the driver, on the armrest mounted display.

Main Features :

• Work with automatic sequence operations

• Balance and versatility

• Dedicated technology

• An additional cast iron pump is dedicated to the services

• A telescopic arm that makes your work easier

• The head maximum opening is 60 cm, to accommodate even big trees, there’s no need to change shaker once the trees are growing.

Fast

Effective Gentle On Trees

30140 – Self Propelled Tree Shaker

The electro -hydraulic telescopic arm allows you to reach even the highest branches; it is equipped with a vibrating gripper in high resistance steel suitable for shafts of all sizes. John Deere 4.5 l 135hp Tier III engine (or Tier IV engine).

For large orchards where speed is essential

The 30140 can be equipped with a swiveling head with three 800 mm diameter cutting discs mounted on a hydraulic arm. Can also become a powerful ally in your pruning challenges . The hydraulic arm can work on many different heights and inclinations in order to reach any branch that’s need to be cut.

Main Features :

Pruning disks Optional

• Radiator with air flow proportional to the need.

• Engine water temperature control.

• Hydraulic oil temperature control.

• Less fuel consumption and more power available.

• 4 wheels drive synchronized with double hydrostatic pump at 420 bar. 30140 SHAKER

PU250 – Nut Cleaner

Equipped with a 42 HP water-cooled Yanmar engine, it is efficient and practical thanks to electronic control and adjustment of functions via display and joystick. the PU250 can clean the fruit harvest from leaves, stones, branches and debris.

Dimensions for closed/folded mode:

Height: 2,30 m, Width: 2,32 m

Length: 3,60 m

Main Features :

• The 3.78 m belt for direct trailer loading is adjustable in height by a winch, hydraulically foldable through the joystick and re -foldable for transport; moreover, it can rotate to assume different positions.

• The hopper (2800 l) discharge conveyor with fan for cleaning leaves and debris is adjustable in speed, like the large final sieve for the elimination of waste and fine debris, and the roller separator for branches and stones.

RF19 - Blower

The RF19 is an high performance blower, compact and powerful. The large spiral allows to generate an huge air flow.

well balanced for inclined orchards

Main Features :

• Double speed multiplier, to regulate the air flow as needed.

• Hydraulically adjustable wings to adjust the flow direction.

• Foldable for ease of transportation.

• Well balanced on hydraulic lifting for stability during operation

Rf19 Blower

(optional)

The machine allows faster and more accurate pruning: from their location in the baskets, the operators can easily move forward, up and down as needed, exactly in the most convenient position to carry out their work.

The operator has got the complete control of all the functions of the machine from the commands console situated on the basket.

To accelerate work and solve, as you move on any pruning need at whatever level, without a second passage, the 5050 model allows to connect pneumatic scissors directly to the machine so that two or more operators can work at ground level, while two operators are working from the baskets.

Main Features :

• Yanmar 42 hp low fuel consumption engine,

• Hydrostatic transmission 4x2

• Max pruning height and width: 7 m and 9 m.

5050 allows to connect pneumatic scissors directly to the machine

The operator has got the complete control of all the functions of the machine from the commands console situated on the basket.

Ideal for fruit plants, it allows to cut branches up to 25 cm in diameter, and has got a working width of 2 , 3 m .

The arm is equipped with spring release, to avoid damages on branches or on the chassis in case of collision .

The swiveling head is equipped with three 800 mm diameter cutting discs and is mounted on a hydraulic arm that can be connected to a tractor.

Main Features :

The swiveling head is equipped with three 800 mm diameter cutting discs and is mounted on a hydraulic arm that can be connected to a tractor.

Prune

Chestnut Harvester 498

Chestnut Harvester 498

Designed to facilitate the harvesting of chestnuts in well-leveled and prepared soils. The transmission to the belt, the screen, the star valve and the side fan is completely hydraulic.

The patented shrink disk is rubber coated, so that the opening of the curls is carried out with great efficiency and at the same time, with extreme delicacy. The cleaning phase has improved, in order to allow high hourly yields and reliability over time.

Main Features :

• Suction tube: ø up to 140 mm

• Max hose length (ø 120 mm): 50 m

• Patented loop opening device

• 4-stage cleaning system

• Hydraulic leveling system kit with pipes and couplings (optional)

• Side collector kit (optional)

Specialized machines for chestnut professionals

From the harvest to the calibration of the chestnuts: Monchiero offers a complete range of specialized machines, practical in use and capable of ensuring optimal yields.

Helping our clients become better growers Your turn-key partner in Walnut Business

Copyright (c) 2023 NutVision . All rights reserved .

This brochure contains copyrighted material, including text, graphics, logos, and images, that belong to Nisão Lda and/or other companies . Any unauthorized use, reproduction, or distribution of this material is strictly prohibited and may result in legal action . The NutVision product line featured in this brochure is the property of Nisão, Lda and is protected by copyright laws . Unauthorized use of the NutVision or Nisão name, logo, or any other proprietary information associated with the product line is strictly prohibited . Other companies' trademarks, logos, and product names mentioned in this brochure may also be subject to copyright protection NutVision is committed to protecting its intellectual property rights and will take appropriate legal action against any party found to be in violation of those rights . Thank you for respecting our intellectual property .