250MX
250MX REPLACEMENT PARTS
STRIKE ROUTER
VERSATILE, SAFETY FEATURES 9-FOOT JAMB READY
BITS
ELECTRICAL
MECHANICAL
165-001 Hinge bit 1/2” dia. 1/4 radius 1/4-28 thread
SAF5001 Shank 1/2” D x 1-1/2” OA
0203-005 Clamp Block
4816-007 $19.95 Switch insert
9025-101 Stop, jamb
11-1797 $16.25 Switch, handle
11-300 Relay
DEW616M Router motor
13-1022 Dewalt router cord
BLA398139 Router brush all dew616 routers EACH
10-133 Air cylinder, clamp
10-535 Air valve clamp pedal
TEMPLATES
250M Service Kits
26-0203-00: 250M Dust Collection Kit Without Vacuum
For 250M SR-1850 and above 0292-004 Uses 9202-001 & 9206-001 at 5-1/2” center to center
0292-006 Template. Uses 9202001 & 9219-001 at 5-1/2” center to center
250M Service Kits
The cutting bit on a 250M is fairly exposed. This kit, even though it was intended to add vacuum to the machine, provides additional guarding around the bit.
PNEUMATIC
26-0201-01 250M Extra Stop System For all 250’s that have Dead Bolt Stops
The extra stop system for the 250M machines is a set of stops that mount onto the slide rods for the dead bolt stops. The stops can be set for almost any dimension less than the dead bolt stop. One of the common uses of the stop system is to prep heads for ball catch strikes.
DeWalt 616 Router Upgrade Machine Parts
The 250M used a Black & Decker or DeWalt motor that is no longer available. The motor that is currently available from DeWalt is larger and will not fit the machine as built. This kit converts the 250M strike routers to use the DeWalt DW616 router motor. Router included. 26-0206-00 26-0206-01
SR2102 & below SR2103 & above
26-0201-00 Deadbolt Stop Assembly Kit For 250M
The 26-0201-00 is the dead bolt stop upgrade kit. It adds the dead bolt stop assembly option to a 250M that was ordered without it. 126
1-800-824-6242 • 1-530-879-3137