5. Sew the hem !

■ Fold towards the inside the 5cm flap that is on the front side of the panel. Hold it in place with some clips and saw it leaving a 1cm seam allowance. There is no need to create a hem on this seam since it will be covered by the zipper.

■ Consider now the curves, those that connect point A to point A in the previous facade. Saw along the line with the polyester thread. Use a straight stitch and set the stitch lenght to 3,5mm.

■ Fold the hem twice towards the inside, follow the stitching as a guide. Place some clips along the hem.

■ Start sewing along the hem, if you have done everything right you should have a 1cm hem that has a double fold.