1. Cut the material

■ Lay out the Nylon fabric on a large surface and cut the margins of the fabric. to make sure that you are cutting along straight angles use the ripstop weave as a guide.

■ Once you have a perfect rectangle that measures 150x500cm take the measures for the two main pieces that you will have to cut, the fly and the door.

■ On the leftover material draw the reinforcement patches and the material for the stuff sack.

■ To cut straight lines use a long ruler as a guide and follow the edge with the rotary cutter. To cut curves instead it is easier to use a pair of sharp scissors.

The elements displayed here are not proportionally scaled in relation one to the other in order to show the dimensions conveniently.

Stuff sack

Tie-out patches

Angle patches

Apex patch

Apex patch