OPERATION
...............................................................................................................................................................................................................
Screen: 7.2.0.0 (COM1 interface) MU type MU baud
84
MU bits MU parity MU stop MU prot MU fmt MU test MU addr #0 MU offset ###0 MU Tout ###0 MU btime ###0 MU code MU M900crc MU except <COMM OUTPUTS >
Selection of the type of COM1 interface MU {Off|Modb. internal|Slave|Test rep.} Sel. of the baud rate for COM1 interface MU {9600|19200|38400} Selection of data bits for COM1 interface MU {7|8} Sel. of the parity for COM1 interface MU {None|Even|Odd} Selection of stop bits for COM1 interface MU {1|2} Selection of the protocol for COM2 interface MU {Modb. ASCII|Modb. RTU|M900} Selection of the Modbus format for COM1 interface MU {4321|2143|1234} Selection of the Modbus test for COM1 interface MU {Off|Test float|Test double|Test int|Test mode|Test long| Test string|Test archive} Modbus address for COM1 interface MU Modbus offset for COM1 interface MU Modbus timeout for COM1 interface MU Modbus bit time for COM1 interface MU Code required for access {No|Yes} M900 protocol with CRC {No|Yes} "Exception" message due to a wrong Modbus address {No|Yes} "COMM" book
IMPORTANT: The factory settings of this interface must not be changed for the device types EC 912 and EC 922!
............................................................................................................................................................................................................... Manual EC 900 路 EN03 路 2012-03