Step 6: Drywall application

First, determine the height at which you want your headboard to hang.

Next, using a drill and a 5/16” drill bit, drill two holes 1562mm apart from each other, making sure that they are level. Once your holes are drilled, insert the Drywall Anchors (9) into the holes, then begin screwing the M4.2*50mm Screws (11) into the Drywall Anchors.

9

Important Note: Take note of where the top of the keyholes on the Left Side Frame (C) and Right Side Frame (A) sit.

This will be the height that you will drill your holes at.

11

Important Note: Leave a 3mm gap between the wall and the back of the screw head to hang the headboard on in the following steps.