OUR LOVE BARS COLLECTION Meet Love Bars! Our new ceramic tile collection is sure to add a touch of elegance and style to any space. With a range of chic mattes and vibrant glossy colors to choose from, Love Bars is the perfect choice for any design project. What sets Love Bars apart is the unique combination of rich deep minerals and organic clays used to create each tile. This perfect blend results in a stunning finish that will leave a lasting impression on anyone who sees it. Each tile has its own unique story to tell, giving you the freedom to create truly original designs. They are a perfect choice for design professionals who want to create something truly special.
Venetian Fog
LOVE BARS BERRY
LO V E B A R S M AT T E
White
Sand
5" x 10"
5" x 10"
Grey
Blush
5" x 10"
5" x 10"
Venetian Fog
LOVE BARS WHITE MATTE
LO V E B A R S M AT T E
Sage
Teal
5" x 10"
5" x 10"
Berry 5" x 10"
LOVE BARS S GREY MATTE
LOVE BARS GLOSSY
Deep White
Greige
5" x 10"
5" x 10"
Mineral Grey
Coral
5" x 10"
5" x 10"
LOVE BARS BLUE
Venetian Fog
Fern
Royal Green
5" x 10"
5" x 10"
Blue
Ebony
5" x 10"
5" x 10"
LOVE BARS GLOSSY
LOVE BARS GREIGE
Venetian Fog
LOVE BARS TEAL MATTE
LOVE DEEP WHITE GLOSSY
LOVE BARS ROYAL GREEEN
Venetian Fog
LOVE BARS BLUSH MATTE
Venetian Fog
LOVE BARS SAND MATTE
LOVE BARS FERN
HOW TO CREATE ROUNDED CORNERS
see royal green + blue project photos for reference.
SIZES TILES Height
Width
Thickness
Nominal
10"
3/8"
YES
5"
FINISHES Matte
Glossy
Bar Size: 0.33 in
ORDER NOTE The size of the piece may vary depending on the color. We do not recommend using compositions that mix different colors. WAREHOUSING: In order to guarantee the characteristics of the finish the product must be kept in its original packaging until the time of fixing. If the product is likely to be stored for a long period of time it should be suitably covered. TILE FIXING: To ensure the products adhere correctly to the surface, it is essential to use specific adhesive and grouting material. This must also be suitable for the environment they will have to withstand. Fitting with traditional mortars does not ensure good adhesion. Due to the nature of the material there may be dimensional variations between pieces. Therefore , all types of joints must be planned and carried out correctly: structural, perimeter, expansion and installation joints. Fitting tiles without joints is not advisable from any technical point of view as this may lead to various problems. For an optimal result we advise to use 1,5 mm (0.06”) grout. MAINTENANCE AND CLEANING: Once the materials have been fitted, it is advisable to remove any remaining adhesive and grouting material by using a commercial descaling product designed especially, diluted with water . The descaling product must not remain in contact with the surface to be cleaned for more than 5 minutes. As a general guideline, powder dertergents should not be used, not wire wool or abrasive materials. Generally a sponge will be sufficient with warm water and liquid neutral soap. Then rinse with plenty of clean water. All sizes are nominal and in inches. Special cut sizes and additional trim pieces are available upon meeting a required minimum order quantity.
INTERIORS
WET
WALLS
A P P L I C AT I O N S
RESIDENTIAL
COMMERCIAL
H I G H -T R A F F I C
70% PRE-CONSUMER R ECYC L E D C O N T E N T
NASCO STONE + TILE
I N S P I R I N G C R E AT I V I T Y S I N C E 1 9 6 5
NASCOSTONETILE.COM