ELECTRICAL STARTING SYSTEM
ELEC
* 9. Clutch switch.
•
Disconnect the clutch switch connector from the harness.
•
Connect the pocket tester (Ω x 1) to the clutch switch cable.
•
Check the clutch switch component for continuity between “Black (1)” and “Black (2)”. Refer to “SWITCH CHECK” in Chapter 3. B B Release Hold
INCORRECT
1
B
B
2
The clutch switch is defective. Replace.
CORRECT 10. Start switch.
•
Disconnect the start switch connector from the harness.
•
Connect the pocket tester (Ω x 1) to the handlebar switch terminal.
•
Check the start switch component for continuity between “Blue/White (1)” and “Black/Yellow (2)”. Refer to “SWITCH CHECK” in Chapter 3. L/W BY Free Pushed in
INCORRECT
LW BY
1
The start switch is defective. Replace the right handlebar switch.
2
CORRECT
* 7-28