SELF-INSPECTION FUNCTIONS Checking Indication
In
Case
of
No.1
Cycle
Discharge
The alarm code occurred last “ ”
Press the check “ ” Switch
P
h
h k“ ”
i h
No.1 Unit Operation Conditions “ ”
“ ”
Discharge Pressure (MPa) Suction Pressure (MPa) Suction Gas Temperature (℃)
This dot shows checking indication mode.
No.2 Unit Operation Conditions “ ”
“ ”
Discharge Pressure (MPa) Suction Pressure (MPa) Suction Gas Temperature (℃)
In Case of No.4 Cycle Suction Gas Temp.2
No.3 Unit Operation Conditions Discharge Pressure (MPa) Suction Pressure (MPa) Suction Gas Temperature (℃) “ ”
“ ”
In Case of Chilled Water Outlet Temp.7
Inlet Water Temperature(℃)
““ ””
“ “” ”
Outlet Water Temperature(℃) In Case of Setting Water Outlet Temp.12 “ ” “ ” “ ” “ ” Setting Water Temperature(℃) “ ”
“ ”
Neutral Zone temperature( ) “ ”
“ ”
In Case of Ambient Temperature 35
Ambient Temperature ( ) “ ”
“ ”
ROM Version No. In Case of ROM Version No. 190
20