general_overview_1103_EN_SCREEN by Navid Anari

General overview. Pumps and systems for the segments Building Services, Water Management and Industry.

Delivery range â&#x20AC;&#x201C; 2011

Contents

High-efficiency solutions from Wilo.

from page 4

Worldwide.

Building Services

from page 6

Pumps and pump systems for heating, air conditioning, cooling, pressure boosting, water supply and sewage disposal in domestic households, rented accommodation, administrative and commercial buildings.

Water Management.

from page 34

Pump and pump systems for water supply and sewage disposal and sewage treatment in municipal buildings.

Industry

from page 50

Pump and pump systems for cooling water and heating systems, raw water intake, water and fire-extinguishing water supply and for water purification and sewage disposal.

Worldwide. High-efficiency solutions from Wilo.

Production sites Germany

Dortmund Oschersleben Hof Roth Minden

France

Chatou Laval Aubigny

England

Kingâ&#x20AC;&#x2DC;s Lynn London

Ireland India

Limerick Pune Kolhapur Calcutta

China

Beijing Qinghuangdao

South Korea Gimhae USA

Thomasville

WILO SE, with headquarters in Dortmund, is one of the world's leading manufacturers of pumps and pump systems for heating, air conditioning and cooling technology, as well as for water supplies and sewage treatment and disposal. Founded in 1872 as Kupfer- und Messingwarenfabrik Louis OplĂ¤nder, the company has almost 70 branches worldwide and over 6,000 employees. Turnover amounted to 926 million EUR in 2009. International recognition has increased rapidly since the company became a European limited liability company (SE) in 2008. Wilo pumps and systems set global standards for efficiency and technical performance: with high-efficiency solutions for all applications in the segments. Building Services Water Management. Industry

Building Services Pumps and pump systems for heating, air conditioning, cooling, pressure boosting, water supply and sewage disposal in domestic households, rented accommodation, administrative and commercial buildings.

Porsche Museum, Stuttgart, Germany High-efficiency heating and warm-water supply. The Task: The high-efficiency Wilo standard, already well established in the plants and production facilities of Porsche is set to feature in the Porsche museum as well. The Solution: The supply of heating and water to the entire museum shall come solely by means of Wilo Stratos high-efficiency pumps and needsbased and energy-saving in-line pumps from Wilo.

Heating, air-conditioning, cooling.

Pressure boosting.

Sewage disposal.

Wilo-Stratos high-efficiency pump. The first high-efficiency pump for heating, air-conditioning and Âcooling worldwide.

Wilo pressure boosting systems with Helix high-pressure multistage Âcentrifugal pumps. Constant pressure at every level.

Wilo-DrainLift M, L Full-value and connection-ready faeces lifting unit for detached and semi-detached houses.

Skyper-Hochhaus, Frankfurt/Main, Germany. Intelligent pressure boosting. The Task: Needs-based, energy-efficient potable water supply â&#x20AC;&#x201C; with high pressure for more than 38 floors and a height of up to 153 metres. The Solution: Pressure boosting systems from Wilo ensure intelligent water supply with the highest technological standards.

Ostseeresidenz Heringsdorf, Insel Usedom, Germany. Effective sewage management. The Task: Disposal of a range of sewage from a total of 15 hotels, villas and residences, including underground garages, swimming pools and wellness zones, fitness areas, restaurant and a brewery. The Solution: The resource-friendly use of rain water coupled with the extremely effective and reliable handling of all sewage only uses Wilo pumps and heating systems.

Highest efficiency at the lowest life cycle costs. The economic supply to buildings increasingly demands the use of innovative systems from optimally configured components. Whether in a detached or semidetached home, industrial, commercial or public buildings, hospitals or hotels: Wilo convinces everyone with its high-efficiency pumps and systems for heating systems, air conditioning, water supply and sewage disposal. Many processes within Facility Management can be controlled and regulated by building automation systems conveniently. Wilo high-efficiency pumps and Wilo pump systems with electronic controls offer the best technological foundations anywhere in the market. They are at home in any system and can be integrated optimally into building automation. They offer exceptional possibilities for saving on power and upkeep costs. An investment, that will soon be offset and more than pay for itself in the long run.

Wilo Online catalogue. All pumps for the Building Services segment at a glance.

Product overview. Building Services 9

Heating, air-conditioning, cooling

from page 10

Pumps, pump systems and accessories for heating, air-conditioning and secondary hot water. > High-efficiency-, energy-saving and standard pumps in glandless and glanded pump versions > Pump regulators and controls, modules for building automation and switchgears > Lifting units for condensates Water supply

from page 19

Pumps, pump systems and accessories for > Rainwater utilisation > Domestic water supply > Commercial water supply and pressure boosting > Fire-extinguishing water supply > Raw water intake Drainage and sewage

from page 27

Pumps, pump systems and accessories for > Wastewater collection and transport > Drainage > Pressure drainage

Building Services Field of application Heating, air-conditioning, cooling

Field of application Heating, air-conditioning, cooling

APPLIES TO EUROPEAN DIRECTIVE FOR ENERGY RELATED PRODUCTS

Product category Glandless high-efficiency pumps Series Wilo-Stratos PICO

Field of application Heating, air-conditioning, cooling

APPLIES TO EUROPEAN DIRECTIVE FOR ENERGY RELATED PRODUCTS

Product category

Glandless automatic pumps Series Wilo-Smart Wilo-Smart A

Glandless high-efficiency pumps Series Wilo-Stratos Wilo-Stratos-D

Design Glandless circulation pump with screwed connection, blocking-current proof synchronous motor according to ECM technology and built-in electronic performance control for variable differential pressure control. With maximum efficiencies and high starting torque, including automatic deblocking function.

Design Glandless circulation pump with threaded connection or flange connection, EC motor and automatic power adjustment.

Design Glandless circulation pump with threaded connection and automatic power adjustment

Application All hot water heating systems, airconditioning applications, industrial circulation systems.

Application Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems

Application Hot-water heating systems of all kinds and industrial circulation systems

Q max. 4 m³/h

Q max. 61 m³/h

Q max. 3.5 m³/h

H max. 6.0 m

H max. 13 m

H max. 6 m

Technical data • Fluid temperature +2 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Threaded connection Rp ½, Rp 1 and Rp 1¼ • Max. operating pressure 10 bar

Technical data • Perm. temperature range -10 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure screw-end pumps 10 bar • Flange-end pumps 6/10 bar / 6 bar (special version: 10 bar or 16 bar)

Technical data • Perm. temperature range +2 °C to +95 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 42 • Nominal width Rp 1 • Max. operating pressure 10 bar

Equipment/function • Control mode: Δp-v and Δp-c • Automatic setback operation • Automatic bleeding function • Automatic deblocking function • Red-button technology for simple operation • Display indication of current power consumption in W and accumulated electricity consumption in kWh • Blocking current-proof motor • Particle filter • Quick electrical connection with WiloConnector • Options: --Design with bronze pump housing for use in underfloor heating systems, --Versions with short port-to-port length 130 mm

Equipment/function • EC motor • Pre-selectable control modes ∆p-c, ∆p-v, ∆p-T • Automatic setback operation for additional savings potential • Dual pump management • Red-button technology for simple operation • Graphical pump display with rotating display • Remote control via infrared interface (IR-Module/IR-Monitor) • Integrated motor protection • System expansion by means of retrofittable interface modules for communication: Modbus, BACnet, CAN, LON, PLR etc. • Pump housing with cataphoretic coating • Combination flanges PN 6/PN 10 (for DN 32 to DN 65) • Thermal insulation shells as standard for heating applications

Equipment/function • Automatic load adjustment • Red-button technology for easy operation • Blocking current-proof motor • Quick connection with spring clips

Special features • Energy efficiency class A • High-efficiency pump especially for single and two-family houses, as well as for two to six-family houses. • Up to 90% electricity savings compared to old uncontrolled heating pumps • Only 3 watts min. power consumption • Very high starting torque for reliable starting • Integrated motor protection • Bleeding routine for automatic bleeding of the rotor chamber

Special features • Energy efficiency class A • Up to 80 % electricity savings over circulation pumps without speed control • Highest degrees of efficiency due to ECM technology

Special features • Energy efficiency class A (Smart A) • Up to 70% electricity savings compared to uncontrolled heating pumps (Smart A) • Automatic control function

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Heating, air-conditioning, cooling

Field of application Heating, air-conditioning, cooling

Product category

Glandless standard pumps Series Wilo-Star-RS Wilo-Star-RSD

Design Glandless circulation pump with threaded connection. Preselectable speed stages for power adjustment

Glandless standard pumps Series Wilo-TOP-S Wilo-TOP-SD

Design Glandless circulation pump with threaded connection or flange connection.

Glandless standard pumps Series Wilo-TOP-RL

Design Glandless circulation pump with threaded connection or flange connection.

Glandless standard pumps Series Wilo-TOP-D

Design Glandless circulation pump with threaded connection or flange connection and fixed speed

11 Application Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems

Application Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems

Application Hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems

Application Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems

Q max. 5.8 m³/h

Q max. 75 m³/h

Q max. 10 m³/h

Q max. 75 m³/h

H max. 7.8 m

H max. 19 m

H max. 7.5 m

H max. 2.9 m

Technical data • Perm. temperature range -10 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp ½, Rp 1 or Rp 1½ • Max. operating pressure 10 bar

Technical data • Perm. temperature range -20 °C to +130 °C In short-term operation (2 h) up to +140 °C • For use with Wilo-Protect-Module-C: -20 °C to +110 °C • Mains connection: --1~230 V, 50 Hz (depending on type) --3~400 V, 50 Hz --3~230 V, 50 Hz (with optional switching plug) • Protection class IP 44 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure screw-end pumps flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar)

Technical data • Perm. temperature range -20 °C to +130 °C • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz • Protection class IP 44 • Nominal width Rp 1 to DN 40 • Max. operating pressure screw-end pumps 10 bar flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar)

Technical data • Perm. temperature range -20 °C to +130 °C In short-term operation (2 h) up to +140 °C • Mains connection 1~230 V, 50 Hz, with condenser 3~400 V, 50 Hz, 3~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1¼ to DN 125 • Max. operating pressure screw-end pumps 10 bar flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar)

Equipment/function • Three manually selectable speed stages • Wrench attachment point on pump housing • Blocking-current proof motor, motor protection not required • Cable lead-in on both sides for simple installation • Quick connection with spring clips • RSD version as double pump

Equipment/function • Preselectable speed stages for power adjustment • Combination flange PN 6/PN 10 (DN 40 to DN 65) • Pump housing with cataphoretic coating • Thermal insulation shells as standard for heating applications • Extendable motor protection, signal and display functions • Cable lead-in on both sides for easy installation

Equipment/function • Pre-selectable speed stages for power control • Combination flanges PN 6/PN 10 (DN 40) • Pump housing with cataphoretic coating

Equipment/function • Blocking current-proof motor or full motor protection • Pump housing with cataphoretic coating • Combination flanges PN 6/PN 10 (DN 40 to DN 65) • Thermal insulation shells as standard for heating applications

Special features • Suitable for any installation position with horizontal shaft; terminal box in 3-6-9-12 o'clock positions • 3 pre-selectable speed stages for load adjustment

Special features • Pump communication in simple and safe retrofit plug-in technology • Easy installation due to combination flanges up to nominal diameter DN 65

Special features • Pre-selectable speed stages for manual power adjustment

Special features • For the commercial area: for systems with low pipework resistances

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Heating, air-conditioning, cooling

Field of application Heating, air-conditioning, cooling

tension Series ex

NEW

Product category Glanded high-efficiency pumps in in-line design Series Wilo Stratos GIGA

Product category

Glanded energy-saving pumps in in-line design Series Wilo-VeroLine-IP-E Wilo-VeroTwin-DP-E

Glanded energy-saving pumps in in-line design Series Wilo-CronoLine-IL-E Wilo-CronoTwin-DL-E

Design High-efficiency inline pump with EC motor and electronic duty adaptation in glanded construction. Version as singlestage low-pressure centrifugal pump with flange connection and mechanical shaft seal.

Design Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment

Application Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.

Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems

Q max. 35 m³/h

Q max. 170 m³/h

Q max. 680 m³/h

H max. 52 m

H max. 30 m

H max. 65 m

Technical data • Permitted temperature range of the fluid -20 °C to +140 °C • Mains connection: 3~400 V (±10 %), 50/60 Hz; 3~380 V (-5 %/+10 %), 50/60 Hz • Protection class IP 55 • Max. operating pressure 16 bar to +120 °C, 13 bar to +140 °C

Technical data • Permissible temperature range -20 °C to +120 °C • Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 80 • Max. operating pressure 10 bar (special version: 16 bar)

Technical data • Permissible temperature range -20 °C to +140 °C • Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz • Protection class IP 55 • Nominal diameter DN 40 to DN 80 • Max. operating pressure 16 bar

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Coupling • EC motor with electronic power adjustment

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Motor with integrated electronic speed control • DP-E with switchover valve

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Coupling • Engine with integrated electronic power adjustment • DL-E with switchover valve

Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPS-GF40 • Shaft: 1.4122 • Mechanical seal: AQ1EGG Other mechanical seals: on request

Special features • Innovative high-efficiency pump for the highest overall degrees of efficiency based on a new Wilo glanded design • High-efficiency EC motor (degrees of efficiency above IE4 limit values acc. to IEC TS 60034-31 Ed.1) • New hydraulics optimally adapted to the EC motor technology • Integrated electronic power adjustment • Extremely compact and space-saving design • Simple operation by tried-and-tested red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Control range up to three times greater than in conventional electronically controlled pumps • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual-pump management with efficiency-optimised peak-load cut-in Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling We are continually adding to this series.

Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO-GF30 • Shaft: 1.4021 • Mechanical seal: AQEGG Other mechanical seals: on request

Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: Standard version: EN-GJL-200 special version: G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power: motors with IE2 technology • Energy savings due to integrated electronic power control • Simple operation with red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual pump management • Integrated full motor protection (PTC thermistor sensor) with trip electronics

Special features • Motors with IE2 technology for higher efficiency fitted as standard • Energy savings due to integrated electronic power control • Simple operation with red-button technology and display • Various control modes Δp-c, Δp-v, PID and n-const. (control mode) • Analogue interfaces 0-10 V, 2-10 V, 0-20 mA, 4-20 mA • Optional interfaces for bus communication using plug-in IF-Modules • Integrated dual pump management • Integrated full motor protection (PTC thermistor sensor) with trip electronics

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Heating, air-conditioning, cooling

Field of application Heating, air-conditioning, cooling

Product category

Glanded standard pumps in in-line design Series Wilo-VeroLine-IPL Wilo-VeroTwin-DPL

Glanded standard pumps in in-line design Series Wilo-CronoLine-IL Wilo-CronoTwin-DL

Special glanded pumps in in-line design Series Wilo-VeroLine IPH-W Wilo-VeroLine IPH-O

Special glanded pumps in in-line design Series Wilo-VeroLine-IPS

Design Glanded pump in in-line design with threaded connection or flange connection

Design Glanded pump in in-line design with flange connection

Design Glanded pump in in-line design with threaded connection or flange connection

Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems

Application IPH-W: For pumping hot water without abrasive matter in closed industrial circulation systems, district heating, closed heating systems, etc. IPH-O: For pumping heat transfer oil in closed industrial circulation systems

Application For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems.

Q max. 240 m³/h

Q max. 1.150 m³/h

Q max. 80 m³/h

Q max. 13 m³/h

H max. 52 m

H max. 110 m

H max. 38 m

H max. 3 m

Technical data • Perm. temperature range -20°C to +120°C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure 10 bar (special version: 16 bar)

Technical data • Perm. temperature range -20 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 250 • Max. operating pressure 16 bar (25 bar on request)

Technical data • Permissible temperature range IPH-W: -10 °C to +210 °C (at a max. of 23 bar) • Permissible temperature range IPH-O: -10 °C to +350 °C (at a max. 9 bar) • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 20 to DN 80

Technical data • Perm. temperature range -10 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter Rp 1, DN 40 and DN 50 • Max. operating pressure 10 bar or 6 bar for flange connection

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • For flange connection with pressure measuring connection R 1/8 • Motor with one-piece shaft • DPL with switchover valve

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection with pressure measuring connection R 1/8 • Lantern • Coupling • IEC standard motor • DL with switchover valve

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Motor with special shaft

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal or stuffing box • Threaded or flange connection with pressure measuring connection R 1/8 • Standard motor

Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type) • Shaft: 1.4021 • Mechanical seal: AQEGG; other mechanical seals on request

Materials: • Pump housing and lantern: EN-GJL-200 • Impeller: Plastic • Shaft: 1.4021 • Mechanical seal: BVEGG Other mechanical seals on request

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power: motors with IE2 technology • Standard condensate drainage holes in the motor housings and lanterns • Series version: Motor with one-piece shaft • Version N: Standard motor B5 or V1 with stainless steel plug shaft • Bidirectional mechanical seal with forced flushing • Easy to install due to feet with threaded holes on pump housing

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power: motors with IE2 technology • Reduced life cycle costs due to optimised efficiency • Standard condensate drainage holes in the motor housings • Can be used flexibly in air-conditioning and cooling systems, with application benefits due direct draining of condensate via optimised lantern design (patented) • Bidirectional mechanical seal with forced flushing • High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals • Easy to install due to feet with threaded holes on pump housing

Special features • Motors with IE2 technology for higher efficiency fitted as standard • Bidirectional, self-cooled mechanical seal • Great variety of applications by a large fluid temperature range without additional wearing parts

Special features • Worldwide availability of the standard motors used

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Heating, air-conditioning, cooling

Field of application Heating, air-conditioning, cooling

Product category

Glanded monobloc pumps Series Wilo CronoBloc BL

Glanded monobloc pumps Series Wilo-BAC

Standard glanded pumps Series Wilo-CronoNorm NL Wilo-VeroNorm-NPG

System separation for underfloor heating Series Wilo-Safe

Design Glanded pump in monobloc design with flange connection

Design Glanded pump in monobloc design with threaded connection or Victaulic connection

Design Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate.

Design Wilo-Safe: Complete system/basic device for hydraulic separation of floor heating systems

Application For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems.

Application For pumping water-glycol mixtures with 20 to 40 %

Application • Pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes. • For pumping heating water in accordance with VDI 2035, water/ glycol mixtures, cooling/cold water and process water. • For applications in municipal water supply, irrigation, building services, industry, power stations etc.

Application Wilo-Safe: Floor heating systems of all kinds, system separation for oxygen-rich fluids

Q max. 360 m³/h

Q max. 80 m³/h

Q max. 3,000 m³/h

H max. 105 m

H max. 25 m

H max. 140 m

Technical data • Perm. temperature range -20 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter DN 32 to DN 150 • Max. operating pressure 16 bar (25 bar on request)

Technical data • Perm. temperature range -15 °C to +60 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 54 • Nominal diameter G2/G 1½ (only BAC 40 …) or Victaulic connection 60.3/48.3 mm (BAC 40 …) 73.0/73.0 mm (BAC 70 …) • Max. operating pressure 6 bar

Technical data • Perm. temperature range -20 °C to +140 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter on suction side DN 50 to DN 500 • Nominal diameter on pressure side DN 32 to DN 500 • Maximum operating pressure: depending on type and application up to 16 bar

Technical data Wilo-Safe: • Max. operating pressure 6 bar • Perm. temperature range +20 °C to +90 °C • Mains connection 1~230 V, 50 Hz • Heat exchanger 5-24 kW

Equipment/function Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port with • Mechanical seal • Flange connection with pressure measuring connection R 1/8 • Lantern • Coupling • IEC standard motor

Equipment/function Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port

Equipment/function Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling protection, motor and baseplate • Mechanical seal or stuffing box • Wilo factory motor or ATB motor

Equipment/function Wilo-Safe • The complete system is ready-mounted and pressure-checked

Materials • Pump housing: PA 6.6 50% GF • Impeller: PA/PPO, fibreglass-reinforced • Shaft: X30Cr13 • Mechanical seal: BQEGG

Materials: • Pump housing: EN-GJL-250 • Impeller: EN-GJL-250 • Shaft: 1.4028

Materials • Pump housing standard: EN-GJL-250 Optional: EN-GJS-400-18 • Impeller (standard): EN-GJL-200 Special version: Bronze G-CuSn10 • Shaft: 1.4122 • Mechanical seal: AQEGG other mechanical seals on request Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power motors with IE2 technology • Meets user requirements due to performance and main dimensions in accordance with EN 733 • Long motor life due to standard condensate drainage holes in the motor housing • Corrosion protection due to cataphoretic coating

Special features • Reduced life cycle costs due to optimised efficiency • Pump housing in plastic design • Version with Victaulic or threaded connection (BAC 70/135... with Victaulic connection only)

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power motors with IE2 technology • Other materials and versions on request

Special features • Special versions on request (apart from Wilo-Safe)

Information Online catalogue www.wilo.com

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Heating, air-conditioning, cooling

Field of application Heating, air-conditioning, cooling

Product category

xtensio Series e

Product category Condensate lifting units Series Wilo-DrainLift Con Wilo-DrainLift Con Plus

Control devices Series Wilo-CC-HVAC system Wilo-CRn system Wilo-VR-HVAC system

Pump control Series IR-Module, IR-Monitor Wilo-IF-Module Stratos/Wilo-IF-Module Wilo-Protect-Module-C Wilo-Control AnaConWilo-Control DigiCon/DigiCon-A

Design Automatic condensate lifting unit

Design

Application For pumping condensate out of • Heat generators with condensing boiler technology • Air conditioning and cooling systems (e.g. refrigerators, refrigerated display cases and evaporators)

Application Switchgears for controlling 1 to 6 pumps

Application Wilo-Control products for connecting pumps to the building automation

Q max. 0.6 m³/h

Q max. –

H max. 5.4 m

H max. –

Technical data • Mains connection 1~230 V, 50 Hz • Operating mode S3 • Fluid temperature max. 65 °C, (for short periods 80 °C) • Protection class IP 20 • Pressure port 10 mm • Inlet connections 19/30 mm • Gross tank volume 1.2 l (2 l)

Technical data –

Equipment/function • Ready-to-plug system • Level control with float switch • Alarm signal via potential-free contact (NC contact/NO contact) • Integrated non-return valve • Fixation material • 5 m pressure hose

Equipment/function Wilo-CC-HVAC System • Comfort control system for 1 to 6 pumps switched in parallel, with fixed speed

Equipment/function IR-Module, IR-Monitor • Remote control with infrared interface for electronically controlled Wilo pumps

Wilo-CRn system • Comfort control system for 1 to 6 pumps switched in parallel, with integrated speed control Wilo-VR-HVAC System • Vario controller for 1 to 4 pumps switched in parallel, with integrated speed control

Wilo-IF-Modules Stratos/IF-Modules • Plug-in module for BA connection of Stratos, Stratos GIGA, IP-E, DP-E, IL-E/ DL-E, MHIE, MVIE, Helix VE... Wilo-Protect-Module-C • Plug-in module for building automation control of TOP-S/SD pumps without speed control Wilo-Control AnaCon and DigiCon/ DigiCon-A • Analogue and digital interface converter for connecting pumps to the building automation

Special features • Low-noise operation (≤ 43 dB[A]) • 2/4 inlet openings • Standard alarm contact (NC/NO contact) • Easy to install • Motor unit reversible by 180° (Con) • Variable inlets/drains • Suitable for condensates with a pH value ≥2.4

Special features • Special versions on request

Special features

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Solar thermal

Field of application Solar thermal

Field of application Geothermal energy systems

Field of application Secondary hot water

Product category

Glandless high-efficiency pumps Series Wilo-Stratos-ECO-ST

Glandless standard pumps Series Wilo-Star-ST

Glandless standard pumps Series Wilo-Star-RSG

Glandless high-efficiency pumps Series Wilo-Star-Z NOVA

Design Glandless circulation pump with threaded connection, EC motor and automatic power adjustment

Design Glandless circulation pump with threaded connection. Preselectable speed stages for power adjustment

Design Glandless circulation pump with threaded connection and blocking-current proof synchronous motor

Application Circulation in solar heating systems

Application Circulation in geothermal systems

Application Secondary hot water circulation systems and similar systems in industrial and building services

Q max. 2.5 m³/h

Q max. 4 m³/h

Q max. 5.5 m³/h

Q max. 0.4 m³/h

H max. 5 m

H max. 12 m

H max. 8.5 m

H max. 0.9 m

Technical data • Perm. temperature range +15 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1 • Max. operating pressure 10 bar

Technical data • Perm. temperature range -10 °C to +110 °C • In short-term operation (2 h) up to +120 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp ½ and Rp 1 • Max. operating pressure 10 bar

Technical data • Perm. temperature range -10 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1 and Rp 1¼ • Max. operating pressure 10 bar

Technical data • Fluid temperature: Potable water up to 3.56 mmol/l (20 °d): max. +65°C, in short-term operation (2 h) up to +70°C • Mains connection 1~230 V, 50 Hz • Protection class IP 42 • Threaded connection Rp ½ • Max. operating pressure 10 bar

Equipment/function • EC motor • Control modes ∆p-v and ∆p-c • Automatic setback operation for additional savings potential • Red-button technology for simple operation • Blocking current-proof motor • Cable lead-in on both sides for easy installation • Quick connection with spring clips • Connection for building automation (BA) • Pump housing with cataphoretic coating for external corrosion protection

Equipment/function • Quick electrical connection with WiloConnector • Blocking current-proof motor • Integrated ball shut-off valve on the suction side (Star-Z NOVA A, Star-ZNOVA C only) • Integrated non-return valve on the pressure side (Star-Z NOVA A, Star-ZNOVA C only) • Including digital plug-in time switch (Star-Z NOVA C only) • Including 1.8 m connecting cable with shock-proof plug (Star-Z NOVA C only) • Including thermal insulation

Special features • Class A motor technology • Up to 80 % electricity savings over circulation pumps without speed control • Highest degrees of efficiency due to ECM technology • Min. electronic power consumption only 5.8 W • 3 times higher starting torque than conventional circulation pumps

Special features • Special hydraulics for applications in solar thermal systems • Up to 30% less current consumption due to class B motor technology

Special features • Special hydraulics for use in geothermal systems

Special features • Extremely low power consumption: 2 to 4.5 Watt due to new synchronous motor • Materials of the highest quality: with stainless steel impeller. This results in a top hygiene standard, durability and reliable protection against corrosion. • Extended field of application for calcareous water: up to 20° dH • Flexible service motor: Fast replacement of all common pump types • Quick and convenient electrical connection with no tools required thanks to Wilo-Connector

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Secondary hot water

Field of application Secondary hot water

Product category

Glandless high-efficiency pumps Series Wilo-Stratos-ECO-Z Wilo-Stratos-ECO-Z … BMS

Glandless high-efficiency pumps Series Wilo-Stratos-Z Wilo-Stratos-ZD

Glandless standard pumps Series Wilo-Star-Z Wilo-Star-ZD

Glandless standard pumps Series Wilo-TOP-Z

Design Glandless circulation pump with threaded connection and automatic power adjustment

Design Glandless circulation pump with threaded connection

Application Secondary hot water circulation systems and similar systems in industrial and building services

Q max. 2.5 m³/h

Q max. 41 m³/h

Q max. 5.5 m³/h

Q max. 65 m³/h

H max. 5 m

H max. 12 m

H max. 6.0 m

H max. 9 m

Technical data • Fluid temperature of secondary hot water up to a water hardness of 3.2 mmol/l (18 °d) max. +65 °C • In short-term operation (2 h) up to +70 °C • Heating water: +15 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1 • Max. operating pressure 10 bar

Technical data • Perm. temperature range of secondary hot water up to water hardness of 3.56 mmol/l (20 °d) max. +80 °C • Heating water -10 °C to +110 °C • Mains connection 1~230 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1 to DN 50 • Max. operating pressure screw-end pumps 10 bar flange pumps 6/10 bar

Technical data • Fluid temperature secondary hot water up to water hardness 3.2 mmol/l (18 °d) max. +65 °C in short-term operation (2 h) up to +70 °C Heating water -10 °C up to +110 °C (not Star-Z 15 TT) • Mains connection 1~230 V, 50 Hz or for Star-Z 25/2 DM 3~400 V, 50 Hz • Protection class IP 44 (IP 42 for Star-Z 15 TT) • Nominal diameter Rp ½, Rp 1 • Max. operating pressure 10 bar

Technical data • Perm. temperature range of secondary hot water up to a water hardness of 3.56 mmol/l (20 °d) max. +80 °C • Heating water -10 °C to +110 °C • Mains connection: --1~230 V, 50 Hz (depending on type) --3~400 V, 50 Hz --3~230 V, 50 Hz (with optional switching plug) • Protection class IP 44 • Nominal diameter Rp 1 to DN 50 • Max. operating pressure screw-end pumps 10 bar • Flange pumps 6/10 bar

Equipment/function • EC motor • Control mode ∆p-v (BMS versions ∆p-v and ∆p-c) • Automatic setback operation for additional savings potential • Red-button technology for simple operation • Blocking current-proof motor • Cable lead-in on both sides for easy installation • Quick connection with spring clips • Thermal insulation shell

Equipment/function • EC motor • Pre-selectable control modes ∆p-c, ∆p-v, ∆p-T • Pre-selectable speed for constant operation • Automatic setback operation for additional savings potential • Dual pump management • Red-button technology for simple operation • Graphical pump display with rotating display • Remote control via infrared interface (IR-Module/IR-Monitor) • Integrated motor protection • System extension due to retrofit communication modules LON, CAN, PLR, etc. • Combination flanges PN 6/PN 10 (for DN 40 and DN 50) • Thermal insulation shells as standard for heating applications

Equipment/function • Constant speed or for Star-Z 25/6, 20/4, 20/5, 20/7 three selectable speed stages • Blocking-current proof motor, motor protection not required • Quick connection with spring clips • Thermal insulation as standard for StarZ 15 TT. • Star-Z 15 TT with integrated timer and thermostat, LC display with symbolic language, red button technology and automatic detection of the thermal disinfection of the warm secondary hot water tank, as well as ball shut-off valve on the suction side and non-return valve on the pressure side. • Star-ZD version as double pump

Equipment/function • Pre-selectable speed stages • Thermal insulation as standard • All plastic parts that come into contact with the fluid fulfil KTW recommendations • Combination flange PN 6/PN 10 (DN 40 to DN 65) • Extendable motor protection, signal and display functions • Full motor protection • Cable feed into terminal box possible on both sides (starting from P1 ≥ 250 W) with integrated strain relief

Special features • Corrosion-resistant pump housing made of red brass for systems where oxygen entry is possible • 3 times higher starting torque than conventional circulation pumps • All plastic parts that come into contact with the fluid fulfil KTW recommendations • Min. electronic power consumption only 5.8 W

Special features • Up to 80 % over circulation pumps without speed control • Highest degrees of efficiency due to ECM technology • Corrosion-resistant pump housing made of red brass

Special features • All plastic parts that come into contact with the fluid fulfil KTW recommendations

Special features • Pump communication in simple and safely retrofit plug-in technology • Easy installation due to combination flange, nominal diameter DN 40 to DN 65

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Secondary hot water

Product category Glanded special pumps Series Wilo-VeroLine IP-Z

Design Glanded circulation pump in in-line design with threaded connection Application For pumping potable water, cold and hot water (in accordance with VDI 2035) without abrasive substances, in heating, cold water and cooling water systems Q max. 5 m³/h H max. 4.5 m Technical data • Perm. temperature range of secondary hot water up to a water hardness of 4.99 mmol/l (28 °d) max. +65 • In short-term operation (2 h) up to +110 °C • Heating water -8 °C to +110 °C • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz • Protection class IP 44 • Nominal diameter Rp 1 • Max. operating pressure 10 bar Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Threaded connection • Motor with one-piece shaft

Special features • High resistance to corrosive fluids due to stainless steel housing and Noryl impeller • Wide range of applications due to suitability for water with hardness values up to 5 mmol/l (28 °dH) • All plastic parts that come into contact with the fluid fulfil KTW recommendations

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Water supply

Field of application Water supply

Product category

Rainwater utilisation systems Series Wilo-RainSystem AF Basic Wilo-RainSystem AF Comfort

Rainwater utilisation systems Series Wilo-RainSystem AF 150

Rainwater utilisation systems Series Wilo-RainSystem AF 400

Rainwater utilisation system Series Wilo-RainCollector II RWN

Design Ready-to-plug rainwater utilisation system

Design Automatic rainwater utilisation system with 2 self-priming pumps

Design Automatic rainwater utilisation system with run-down tank container and 2 non self-priming pumps

Design Ready-to-plug rainwater utilisation system with rainwater tank

Application Rainwater utilisation for saving potable water in conjunction with cisterns or tanks

Application Rainwater utilisation in multi-family houses and small trade businesses for saving potable water in conjunction with cisterns or tanks

Application Hybrid system for commercial and industrial rainwater utilisation for saving potable water in conjunction with cisterns or tanks

Application Rainwater utilisation for saving potable water

Q max. 5 m³/h

Q max. 12 m³/h

Q max. 16 m³/h

Q max. 4 m³/h

H max. 52 m

H max. 58 m

H max. 56 m

H max. 52 m

Technical data • Mains connection 1~230 V, 50 Hz • Suction head max. 8 m • Fluid temperature max. +5 °C to +35 °C • Operating pressure max. 8 bar • Replenishment reservoir 11 l • Protection class IP 42

Technical data • Mains connection 1~230 V, 50 Hz • Suction head max. 8 m • Fluid temperature max. +5 °C to +35 °C • Operating pressure max. 8 bar • Replenishment reservoir 150 l • Protection class IP 41

Technical data • Mains connection 3~400 V, 50 Hz • Fluid temperature max. +5 °C to +35 °C • Operating pressure max. 10 bar • Replenishment reservoir 400 l • Protection class IP 54

Technical data • Mains connection 1~230 V, 50 Hz • Fluid temperature max. +5 °C to +35 °C • Operating pressure max. 6 bar • Replenishment reservoir 1,500 l • Protection class IP 54

Equipment/function • Connection-ready module with compact construction • Fully connected electrically and hydraulically • Mounted on a non-corroding base frame • 1 MultiCargo MC centrifugal pump (self-priming) • Pressure-side pipework R 1 • Water replenishment reservoir (11 l) with float valve • 1.8/3.0 m connection cable and mains plug • Switchgear Rain Control Basic RCB/ Economy RCE with control electronics • monitoring rainwater storage levels • Connection for overflow warning

Equipment/function • Connection-ready module with compact construction • Fully connected electrically and hydraulically • Mounted on vibration-insulated painted steel tubular frames • 2 centrifugal pumps MultiCargo MC (self-priming) • Joint tubing R 1 ½" on the pressure side, inc. transmitter unit, diaphragm pressure vessel, shut-off device • Pressure gauge 0-10 bar • Ball valve on suction and pressure sides • Water replenishment reservoir (150 l) with float valve • RainControl Professional central switchgear with control electronics, level sensor • Menu-based operation and display • Cyclical pump cycling and test run when pump at rest • Automatic fault-actuated switchover and peak-load cut-in • Automatic water exchange in the replenishment reservoir, prevents lime deposits • Permanent display of rainwater storage level, system pressure and operating status

Equipment/function • Connection-ready module with compact construction • Fully connected electrically and hydraulically • Mounted on vibration-insulated baseplate • 2 MultiPress MP centrifugal pumps (non-self-priming) • Joint tubing R 1½" on the pressure side, inc. transmitter unit, diaphragm pressure vessel, shut-off device • Pressure gauge 0-10 bar • Ball valve on suction and pressure sides and non-return valve • High-volume hybrid tank with all connections, calmed inlets and overflow with siphon • RainControl Hybrid central switchgear with control electronics • Signals concerning operation and faults • Cyclical pump cycling and test run when pump at rest • Automatic fault-actuated switchover and peak-load cut-in • Automatic water exchange in the replenishment reservoir • Permanent display of rainwater storage tank level, system pressure, operating status (optional)

Equipment/function • 1 centrifugal pump MultiCargo MC (self-priming) • Electronic pump control with WiloFluidControl • Connection cable with plug • 1500 litre storage tank made of polyethylene • Make-up funnel • Dome cover • Protection against low water level • Flexible connection on pressure side • 4 transport carrying handles

Special features • Compact, ready-to-plug rainwater utilisation system • Low-noise, due to multistage centrifugal pump and complete encapsulation of the system (AF Comfort) • Fulfilment of DIN 1988 and EN 1717 • High economic efficiency due to fresh water replenishment according to requirements • Flow- and noise-optimised replenishment reservoir • All parts that come in contact with the fluid are corrosion-free • For AF Comfort: automatic support function for evacuation of air from the suction line

Special features • Low-noise due to multistage centrifugal pumps • All parts that come in contact with the fluid are corrosion-free • Maximum operational safety due to fully electronic RainControl Professional controller • High economic efficiency due to fresh water replenishment according to requirements • High reliability due to DVGW-certified, flow-optimised and noise-optimised replenishment reservoir

Special features • Low-noise due to multistage centrifugal pumps • All parts that come in contact with the fluid are corrosion-free • Maximum operational reliability, due to trendsetting fully electronic RainControl Hybrid controller • High economic efficiency due to fresh water replenishment according to requirements • High reliability, due to flow- and noiseoptimised overall concept • Automatic control of the feeding pump • System/level control in the low-voltage range

Special features • Low-noise, self-priming pump ensures almost noiseless system operation • Corrosion-free • Can be expanded at any time • Multi-tank system with replenishment and setting zone for better water quality (Wilo MKS system) • Greatest possible connection flexibility, due to rotating rainwater inlet

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Other versions, additionally with • Automatic water replenishment • Sable set • Overflow protection when installed under backflow level Extension kits can be retrofitted at any time.

Building Services Field of application Water supply

Field of application Water supply

Product category

Self-priming multistage pumps and pump systems Series Wilo-Jet WJ Wilo-Jet HWJ Wilo-Jet FWJ

Self-priming multistage pumps and pump systems Series Wilo-MultiCargo MC Wilo-MultiCargo HMC Wilo-MultiCargo FMC

Self-priming multistage pumps and pump systems Series Wilo-MultiPress MP Wilo-MultiPress HMP Wilo-MultiPress FMP

Cistern pumps Series Wilo-Sub TWI 5/TWI 5-SE Wilo-Sub TWI 5-SE P&P

Design Self-priming multistage centrifugal pumps

Design Non-self-priming multistage centrifugal pumps

Design Submersible pumps

Application For pumping water from wells for filling, pumping empty, transferring by pumping, irrigation and sprinkling. As emergency pump for overflows

Application For domestic water supply, sprinkling, irrigation, spraying and rainwater utilisation

Application For domestic water supply from wells, cisterns and tanks. For irrigation, sprinkling, rainwater utilisation or for pumping out water

Q max. 5 m³/h

Q max. 7 m³/h

Q max. 8 m³/h

Q max. 16 m³/h

H max. 50 m

H max. 57 m

H max. 88 m

Technical data • Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz • Inlet pressure max. 1 bar • Fluid temperature max. +5 °C to +35 °C • Operating pressure max. 6 bar • Protection class IP 44 • Suction/pressure side connections: --WJ (G 1/G 1) --FWJ (G 1/R 1) --HWJ (G 1/Rp 1)

Technical data • Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz • Inlet pressure max. 4 bar • Fluid temperature max. +5 °C to +35 °C • Ambient temperature max. +40 °C • Operating pressure max. 8 bar • Protection class IP 54 • Suction/pressure side connections: --MC (Rp 1/Rp 1) --FMC (R 1/Rp 1) --HMC (Rp 1/Rp 1)

Technical data • Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz • Inlet pressure max. 6 bar • Fluid temperature max. +5 °C to +35 °C • Ambient temperature max. +40 °C • Operating pressure max. 10 bar • Protection class IP 54 • Suction/pressure side connections: --MP 3.. Rp 1 (Rp 1); MP 6.. Rp 1¼/Rp 1 --FMP 3.. R 1/Rp 1; FMP 6.. R 1¼/Rp 1 --HMP 3.. Rp 1/Rp 1; HMP 6.. Rp 1¼/Rp 1

Technical data • Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz • Fluid temperature max. +3 °C to +40 °C • Operating pressure max. 10 bar • Protection class IP 68 • Connection on pressure side Rp 1¼ • Connection on suction side for SE version Rp 1¼

Equipment/function • With or without carrying frame, depending on the version (WJ, FWJ) • For single-phase AC motor (1~230 V) -- Connection cable with plug -- On/Off switch • Thermal motor protection switch

Equipment/function • Directly flanged motor • Thermal motor protection switch for single-phase AC motor (1~230 V)

Equipment/function • Directly flanged motor • Thermal motor protection switch for 1~230 V version

Equipment/function • Connection cable, 20 m • TWI 5 version with standard inlet basket • Variants --SE: with lateral inlet connecting piece --FS: with built-in float switch • Thermal motor protection for EM version (1~230 V) • Version TWI 5-SE Plug & Pump additionally with --pressure and flow controller Wilo-Fluidcontrol --On-/Off switch --Floating suction fine filter incl. suction hose

Special features • Ideal for portable outdoor applications (hobby, garden) • HWJ version with diaphragm pressure vessel and pressure switch • FWJ version with fluid control for system control

Special features • Low-noise • Ideal as a base-load pump for rainwater utilisation • HMC version with diaphragm pressure vessel and pressure switch • FMC version with fluid control for system control

Special features • Low-noise • Ideal as a base-load pump for rainwater utilisation • HMP version with diaphragm pressure vessel and pressure switch • FMP version with fluid control for system control

Special features • Ready-to-plug in EM version (1~230 V) • Pump (housing, stages, impellers) made entirely of stainless steel 1.4301 (AISI 304) • Self-cooling motor • Installation possible outside water • Thermal motor protection for EM version (1~230 V)

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Water supply

Field of application Water supply

Product category

Multi-pump pressure boosting system Series Wilo-Economy COE-2 TWI 5

Horizontal, multistage centrifugal pumps Series Wilo-Economy MHI

Design Submersible pumps (suitable to be used outside water)

Design Non-self-priming multistage pump

Design Non-self-priming multistage pump with integrated frequency converter

Design Non-self-priming multistage pump with glandless pump motor

Application Pressure boosting and water supply in the domestic area as well as for small commercial installations where a compact construction and a low noise level are required.

Application • Water supply and pressure boosting • Commerce and industry • Cooling water circulation systems • Washing and sprinkling systems

Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems

Application • Water supply and pressure boosting

Q max. 16 m³/h

Q max. 25 m³/h

Q max. 30 m³/h

Q max. 14 m³/h

H max. 65 m

H max. 70 m

H max. 84 m

H max. 110 m

Technical data • Fluid temperature +3 to +40 °C • Operating pressure max. 10 bar • Inlet pressure max. 6 bar • Protection class IP 54

Technical data • Fluid temperature -15 to +110 °C • Operating pressure max. 10 bar • Inlet pressure max. 6 bar • Protection class IP 54

Technical data • Fluid temperature -15 to +50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 54

Equipment/function • Inlet and outlet collecting pipes • Ball shut-off valves on the suction and pressure side • Non-return valve on the pressure side • 1 pressure gauge • 2 pressure switches • BC switchgear

Equipment/function • Stainless steel pump in monobloc design • Threaded connection • Single-phase or three-phase AC motor • Single-phase AC motor with integrated thermal motor protection

Equipment/function • Stainless steel in monobloc design • Threaded connection • Integrated frequency converter • Single-phase or three-phase AC motor • Three-phase version with red-button technology and LCD display for state indication • Integrated thermal motor protection

Equipment/function • Stainless steel pump in in-line design • Three-phase AC motor in glandless pump design

Special features • Pumps of the TWI 5 series with low noise level (51-61 dB(A)) • 2-pump pressure boosting system in compact construction because of the vertical pump construction • Economical system, based on the basic functions of the BC switchgear • Pumps and pipes in stainless steel 1.4301 (AISI 304)

Special features • All parts that come in contact with the fluid are made of stainless steel 1.4301 (AISI 304) or 1.4404 (AISI 316) • Compact design • All relevant components have KTW and WRAS approval

Special features • Easy commissioning • All parts that come in contact with the fluid are made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • Compact design • Integrated frequency converter • Full motor protection • All relevant components have KTW and WRAS approval

Special features • Low-noise (up to 20 dB(A) quieter than conventional pumps) • All parts that come in contact with the fluid are corrosion-resistant • Glandless pump technology • All relevant components have KTW and WRAS approval

Information Online catalogue www.wilo.com

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

Information Online catalogue www.wilo.com

Horizontal, multistage centrifugal pumps Series Wilo-Economy MHIE

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Vertical, multistage centrifugal pumps Series Wilo-Multivert MVIS

Building Services Field of application Water supply

Field of application Water supply

Vertical, multistage centrifugal pumps Series Wilo-Multivert MVISE

Product category

Vertical, multistage centrifugal pumps Series Wilo-Helix-V

tion odifica Series m

tension Series ex

Product category

Field of application Water supply

Vertical, multistage centrifugal pumps Series Wilo-Helix-VE

Product category Vertical, multistage centrifugal pumps Series Wilo-Multivert MVI

Design Non-self-priming multistage pump with glandless pump motor and integrated frequency converter

Design Non-self-priming multistage pump

Design Non-self-priming multistage pump with integrated frequency converter

Design Non-self-priming multistage pump

Application • Water supply and pressure boosting

Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Fire extinguishing systems • Washing systems • Irrigation

Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Washing systems • Irrigation

Application • Water supply and pressure boosting • Fire extinguishing systems • Boiler feed • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems

Q max. 14 m³/h

Q max. 80 m³/h

Q max. 45 m³/h

Q max. 155 m³/h

H max. 110 m

H max. 250 m

H max. 234 m

H max. 240 m

Technical data • Fluid temperature -15 to +50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 44 • Emitted interference in compliance with EN 61000-6-1 • Interference resistance in compliance with EN 61000-6-2

Technical data • Fluid temperature -30 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges

Technical data • Fluid temperature -20 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges

Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55

Equipment/function • Stainless steel pump in in-line design • Glandless pump • Self-venting • Hydraulics in 1.4301 • Oval flange, round flange • Three-phase AC motor with integrated frequency converter, with red-button technology and LCD display for state indication • Integrated thermal motor protection • Protection against low water level

Equipment/function • Impellers, stage chambers and pump housing stainless steel 1.4301/1.4404 (AISI304L/AISI316L) • Versions with 1.44xx stainless steel designed for aggressive fluids • Versions --PN16 with oval flanges and PN25 with round DIN flanges --Helix V22, 32, 52 PN16 and PN25 with round loose flanges in accordance with ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor

Equipment/function • Impellers, stage chambers and pump housing stainless steel 1.4301/1.4404 (AISI304L/AISI316L) • Versions with 1.44xx stainless steel designed for aggressive fluids • PN16 and PN25 versions with round loose flanges in accordance with ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor • Integrated frequency converter

Equipment/function • Stainless steel pump in in-line design • Versions --MVI 1.. up to 16..-6 PN16 with oval flanges and PN25 with round DIN flanges --MVI 16.. to 95.. PN16/PN25 with round DIN flanges --Victaulic connections (PN25) depending on pump type • IE2/IEC standard three phase motor, 2-pole, AC or DC version. Single-phase AC motor with integrated thermal motor protection

Special features • Easy commissioning • Glandless pump technology • Low-noise (up to 20 dB(A) quieter than conventional pumps) • Integrated frequency converter • All components that come in contact with the fluid are made of stainless steel 1.4301 (AISI 304) • All relevant components have KTW and WRAS approval

Special features • Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics • Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid

Special features • MVI 100 … 1600-6 All parts that come in contact with the fluid made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • MVI 1600 … MVI 9500 depending on pump type in stainless steel 1.4404 (AISI 316L) or 1.4301 (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval

Information Online catalogue www.wilo.com

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Water supply

Product category

Field of application Water supply

Product category

Field of application Water supply

Product category

: tension Series ex VIE 32../52.. M COR-1 elix VE -GE H -1 COR Product category

Vertical, multistage centrifugal pumps Series Wilo-Multivert-MVIE

Single-pump pressure boosting system with system separation Series Wilo-Economy CO/T-1 MVI … /ER

Single-pump pressure boosting systems Series Wilo-Economy CO-1 MVIS … /ER Wilo-Economy CO-1 MVI … /ER Wilo-Economy CO-1 Helix-V … /CE

Design Non-self-priming multistage pump with integrated frequency converter

Design Water supply systems with system separation and a non-self-priming, highpressure multistage centrifugal pump

Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump

Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump with integrated speed control

Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems

Application For fully automatic water supply in inlet mode from the public water supply network • For pumping potable water and process water, cooling water, water for firefighting or other service water

Application For fully automatic water supply in inlet mode from the public water supply network or from a break tank • For pumping potable water, process water, cooling water, water for firefighting or other service water

Q max. 145 m³/h

Q max. 8 m³/h

Q max. 135 m³/h

Q max. 97 m³/h

H max. 245 m

H max. 110 m

H max. 160 m

H max. 150 m

Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16 bar/25 bar • Inlet pressure max. 6 bar • Protection class IP 54 or IP 55

Technical data • Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) • Fluid temperature max. 50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 41

Technical data • Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) • Fluid temperature max. 50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Switching pressure stages 6 / 10 / 16 bar • Protection class IP 41

Technical data • Mains connection 3~400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 44

Equipment/function • Stainless steel pump in in-line design • PN16 with oval flanges • PN16/25 with DIN round flanges, Victaulic connections depending on pump type • Single-phase or three-phase current standard motor • Integrated frequency converter • Integrated thermal motor protection • Protection against low water level

Equipment/function • 1 pump of MVI series • PE preliminary tank, atmospherically ventilated (120 l) • Components that come in contact with fluid are corrosion-resistant • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Preliminary tank including float valve and float switch • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Low-water cut-out switchgear

Equipment/function • 1 pump of the MVIS, MVI or Helix-V series • Components that come in contact with fluid are corrosion-resistant • Base frame made of stainless steel 1.4301 with height-adjustable vibration damper for insulation against structureborne noise • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side

Equipment/function • 1 pump of the MVIE, Helix-VE or MVISE series with integrated frequency converter • All parts that come in contact with the fluid are corrosion-resistant • Pipework in stainless steel 1.4571 • Check valve, on pressure side • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16

Special features • Easy commissioning • Full motor protection • Large control range • MVI 100 … 1600-6 All parts that come in contact with the fluid made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • MVI 1600 … MVI 9500 depending on pump type in stainless steel 1.4404 (AISI 316L) or 1.4301 (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval

Special features • Compact system, ready for connection, for all applications that require system separation • Operationally reliable due to the combination of the MVI pump series with the ER-1 control unit

Special features For systems with MVIS pump • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output • Operationally reliable due to the combination with the ER-1 control device

Special features • For systems with MVISE pump • Virtually noiseless system due to the use of glandless, stainless steel, highpressure, multistage centrifugal pumps with integrated frequency converter • Up to 20 dB[A] quieter than conventional systems with comparable hydraulic output

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

For systems with Helix-V pump • IE2 standard motors • Efficiency-optimised, laser-welded 2D/3D hydraulics • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Operationally reliable due to the combination CE control device Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Single-pump pressure boosting systems with speed-controlled pump Series Wilo-Comfort-N-Vario COR-1 MVISE … Wilo-Comfort-Vario COR-1 MVIE … Wilo-Comfort-Vario COR-1 Helix-VE …

For systems with Helix-VE pump • IE2 standard motors • Efficiency-optimised, laser-welded 2D/3D hydraulics • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

Building Services Field of application Water supply

Field of application Water supply

Multi-pump pressure boosting systems Series Wilo-Economy CO 2-4 MHI … /ER Wilo-Comfort-N-CO 2-6 MVIS … /CC Wilo-Comfort-CO 2-6 MVI … /CC Wilo-Comfort-CO 2-6 Helix-V … /CC

Product category

Multi-pump pressure boosting systems with speed control Series Wilo-Comfort-N-COR 2-6 MVIS … /CC Wilo-Comfort-COR 2-6 MVI … /CC Wilo-Comfort-COR2-6 Helix-V … /CC

Field of application Water supply

: tension Series ex MVIE 32../52.. 4 2 COR VE /VR 4 Helix COR2-

tion odifica Series m

Product category

Field of application Water supply

Multi-pump pressure boosting systems with speed controlled pumps Series Wilo-Comfort-Vario-COR 2-4 MHIE … /VR Wilo-Comfort-N-Vario-COR 2-4 MVISE … /VR Wilo-Comfort-Vario-COR 2-4 MVIE … /VR Wilo-Comfort-Vario COR2 -4 Helix-VE …

Product category Multi-pump pressure boosting systems Series Wilo-FLA

Design Pressure boosting system with 2 to 6 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel

Design Pressure boosting system with speed control and 2 to 6 non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel

Design Pressure boosting system with 2 to 4 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel, with integrated speed control

Design Pressure boosting system for fire extinguisher applications with 1 to 2 autonomous working, non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel

Application For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems • For pumping potable water and process water, cooling water, water for firefighting or other service water

Application For supply of fire extinguisher water from fire hose reels according to DIN 14462 from 04/2009

Q max. 800 m³/h

Q max. 560 m³/h

Q max. 80 m³/h

H max. 160 m

H max. 150 m

H max. 130 m

Technical data • Mains connection 3~230 V / 400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 10 bar or 16 bar • Inlet pressure 6 bar • Protection class IP 54

Technical data • Mains connection 3~230 / 400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 54

Technical data • Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230 V, 50/60 Hz • Fluid temperature max. 70 °C • Operating pressure 10 bar • Inlet pressure 6 bar • Protection class IP 54

Technical data • Mains connection 3~230/400 V, 50 Hz • Fluid temperature max. 50 °C • Max. operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 54

Equipment/function • 2 to 4 or 2 to 6 pumps per system • Components that come in contact with fluid are corrosion-resistant • Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise • Pipework in stainless steel 1.4571 • Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Pressure sensor, on discharge side

Equipment/function • 2 to 6 pumps per system • Continuous control operation of the base-load pump via frequency converter integrated in the CC controller • Components that come in contact with fluid are corrosion-resistant • Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise • Pipework in stainless steel 1.4571 • Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Pressure sensor, on discharge side

Equipment/function • 2 to 4 pumps per system • Continuous control operation due to pumps with integrated frequency converters • Components that come in contact with fluid are corrosion-resistant • Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise • Pipework in stainless steel 1.4571 • Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Pressure sensor, on discharge side

Equipment/function • 1 to 2 pumps per system • Components that come in contact with fluid are corrosion-resistant • Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise • Pipework in stainless steel 1.4571 • Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides • Non-return valve, on pressure side • Diaphragm pressure vessel 8 l, PN 16, on pressure side • Pressure sensor, on discharge side • Comes as standard with pump protection by means of minimum volume acceptance via bypass switch without auxiliary energy.

Special features • Compact system in accordance with the requirements of DIN 1988 • 2 to 4 or 2 to 6 high-pressure, multistage centrifugal pumps switched in parallel • Easily adjustable and operationally reliable due to integrated control devices • Series with Helix-V with IE2 motors

Special features • Easy-to-use system in accordance with all requirements of DIN 1988 • 2 to 6 vertical high-pressure multistage centrifugal pumps switched in parallel • Speed-controlled base-load pump • Series with Helix-V with IE2 motors

Special features • Compact system with excellent value for money due high-pressure, multistage centrifugal pumps with integrated frequency converters • Superproportionally large control range • Integrated full motor protection via PTC • Integrated dry-running detection with automatic cut-out in event of low water via performance characteristics of the motor control electronics • Series with Helix-V with IE2 motors

Special features • Compact system in accordance with all requirements of DIN 1988 • 1 or 2 high-pressure multistage centrifugal pumps Helix V series with IE2 motors • Variants --Single-pump system --Twin-pump system with two independent single-pump systems in a base frame • Comes as standard with pump protection by means of minimum volume acceptance via bypass switch without auxiliary energy.

For systems with MVIS pumps • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

For systems with MVISE pumps • Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump • Up to 20 dB (A) quieter than conventional systems with comparable hydraulic output Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

Information Documentation on request

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Water supply

Field of application Water supply

Product category

tion odifica Series m

Product category Submersible pumps Series Wilo-Sub TWU 3

Product category Submersible pumps Series Wilo-Sub TWU 4 … Wilo-Sub TWU 4 …-QC Wilo-Sub TWU 4 …

Submersible pump system Series Wilo-Sub TWU 3 … Plug & Pump Wilo-Sub TWU 4 … Plug & Pump

Submersible pumps Series Wilo-Sub TWU 6 … Wilo-Sub TWU 8 …

Design Submersible pump, multistage

Design Water-supply unit with submersible pump, control and complete accessories.

Design Submersible pump, multistage

Application Water supply from boreholes, wells and rainwater storage tanks; domestic water supply, sprinkling and irrigation; for pumping water without long-fibre and abrasive constituents geothermal applications

Application Water supply from boreholes, wells and rainwater storage tanks; sprinkling, irrigation and pressure boosting; lowering the water level; for pumping water without long-fibre and abrasive constituents geothermal applications

Application Water-supply unit for water supply from boreholes, wells and cisterns; domestic water supply, sprinkling and irrigation; for pumping water without long-fibre and abrasive constituents

Application Water supply from boreholes and cisterns; sprinkling and irrigation; for lowering the water level; for pumping water without long-fibre and abrasive constituents

Q max. 3 m³/h

Q max. 24 m³/h

Q max. 6 m³/h

Q max. 132 m³/h

H max. 130 m

H max. 322 m

H max. 88 m

H max. 380 m

Technical data • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz • Immersed operating mode: S1 • Fluid temperature: 3-40 °C • Minimum motor flow: 0.08 m/s • Max. sand content: 40 g/m³ • Max. number of starts: 20/h • Max. immersion depth: 60 m • Protection class: IP 58 • Pressure port: Rp 1

Technical data • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz • Immersed operating mode: S1 • Fluid temperature: 3-30 °C or 3-40 °C • Min. flow at motor: 0.08 m/s • Max. sand content: 50 g/m³ • Up to 20 starts per hour • Max. immersion depth: 200 m • Protection class: IP 68

Technical data • Mains connection: 1~230 V, 50 Hz • Immersed operating mode: S1 • Fluid temperature: 3-30 °C or 3-40 °C • Min. flow at motor: 0.08 m/s • Max. sand content: --TWU 3- … : 40 g/m³ --TWU 4- … : 50 g/m³ • Up to 20 starts per hour • Max. immersion depth: --TWU 3- … : 60 m --TWU 4- … : 200 m • Protection class: --TWU 3- … : IP 58 --TWU 4- … : IP 68

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Fluid temperature: 3-30 °C • Min. flow at motor: 0.16 m/s (4" motors = 0.08 m/s) • Max. sand content: 50 g/m³ • Up to 20 starts per hour • Max. immersion depth: --TWU 6 … = 250 m --TWU 8 … = 350 m • Protection class: IP 68

Equipment/function • Multistage submersible pump with radial impellers • Integrated non-return valve • NEMA coupling • Single-phase or three-phase motor • Integrated thermal motor protection for single-phase motor

Equipment/function • Multistage submersible pump with radial or semi-axial impellers • Integrated non-return valve • NEMA coupling • Single-phase or three-phase motor • Integrated thermal motor protection for single-phase motor • Hermetically cast motors

Equipment/function • Multistage submersible pump with radial impellers • Integrated non-return valve • NEMA coupling • Single-phase motor • Integrated thermal motor protection • Dry-running protection system (only for TWU 4- … -P&P with Wilo-Sub-I package)

Equipment/function • Immersible, multistage submersible pump • Radial or semi-axial impellers • Integrated non-return valve • NEMA coupling • Three-phase motor • Hermetically cast motors

Special features • Rewindable motor • Integrated non-return valve • Parts that come in contact with fluids are corrosion-free • Pump connection head and flange made of stainless steel • Vertical and horizontal installation possible • Single-phase version with starting capacitor and On/Off switch

Special features • Integrated non-return valve • Parts that come in contact with fluids are corrosion-free • Vertical and horizontal installation possible • Low-wearing due to floating impellers • Quick and easy extension of motor cable, without dismantling the pump (TWU 4-...-QC)

Special features • Electrical system components already prewired • Easy installation and operation • Integrated non-return valve

Special features • Impellers made of bronze • Integrated non-return valve • Immersion depth up to 350 m • Vertical and horizontal installation possible

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Water supply

Field of application Water supply

tension Series ex

Product category Submersible pumps Series Wilo-Sub TWI 4 … Wilo-Sub TWI 6 … Wilo-Sub TWI 8 … Wilo-Sub TWI 10 …

Product category Sprinkler pumps with VdS approval Series Wilo-EMU sprinkler pumps

Design Submersible pump, multistage

Design Sprinkler pump in sectional design

Application Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; for pumping water without long-fibre and abrasive constituents

Application For supplying sprinkler systems

Q max. 165 m³/h

Q max. 580 m³/h

H max. 500 m

H max. 140 m

Technical data • Mains connection: 1~230 V, 50 Hz (only TWI 4 …) or 3~400 V, 50 Hz • Immersed operating mode: S1 • Fluid temperature: 3-20 °C or 3-30 °C • Min. flow at motor: 0.08-0.5 m/s • Max. sand content: 50 g/m³ • Up to 10 or 20 starts per hour • Max. immersion depth: 100-350 m • Protection class: IP 68

Technical data • Mains connection: 3~400 V/50 Hz • Immersed operating mode: S1 • Max. fluid temperature: 25 °C, higher temperatures on request • Min. flow at motor: 0.1 m/s • Max. sand content: 35 g/m³ • Up to 10 starts per hour • Max. immersion depth: --NU 611 = 100 m --Other motors = 300 m • Protection class: IP 68

Equipment/function • Multistage submersible pump with radial or semi-axial impellers • Integrated non-return valve • NEMA coupling • AC-(only TWI 4) or three phase motor • Hermetically sealed or rewindable (TWI 6 … / TWI 8 … / TWI 10...) motors

Equipment/function • Immersible, multistage submersible pump • Radial or semi-axial impellers • NEMA coupling (depending on type) • Three-phase motor for direct or stardelta start. • Rewindable motors

Special features • Unit made completely of stainless steel • Integrated non-return valve • Vertical and horizontal installation possible • Standard and configurable versions available (TWI 6 … / TWI 8 … / TWI 10...) • Star-delta version • Rewindable motors

Special features • VdS certification • Certified non-return valve available as accessory • Version in bronze material • Pressure shroud installation possible • Vertical and horizontal installation possible

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Submersible drainage pumps Series Wilo-Drain TM/TMW/TMR 32 Wilo-Drain TS/TSW 32

Submersible drainage pumps Series Wilo-Drain TS 40 Wilo-Drain TS 50 Wilo-Drain TS 65

Submersible drainage pumps Series Wilo-EMU KS

Self-priming drainage pumps Series Wilo-Drain LP Wilo-Drain LPC

Design Basement drainage pump

Design Submersible drainage pumps

Design Submersible drainage pumps in rugged design for use on building sites

Design Dry-mounted and self-priming drainage pumps

Application For pumping clear or slightly muddy water • From tanks, sumps or pits • For overflows and flooding • For draining basement stairways and basement areas • From domestic areas (washing machine water, soapsuds) • From small fountains, waterworks or streams

Application For pumping wastewater with foreign matter of max. ø 10 mm for • House/site drainage • Environmental and water treatment technology • Industrial and process engineering

Application For drainage of excavation pits, cellar areas, pits and basins. Ideally suited for applications in fountains

Application For pumping wastewater with small amounts of solid matter for • Excavation pits and ponds • Sprinkling / spraying of gardens and green areas • Drainage of seepage water • Mobile drainage

Q max. 16 m³/h

Q max. 53 m³/h

Q max. 340 m³/h

Q max. 71 m³/h

H max. 12 m

H max. 25 m

H max. 71 m

H max. 29 m

Technical data • Mains connection 1~230 V, 50 Hz • Protection class IP 68 • Max. submersion depth TM/TMW = 3m, TS/TSW = 10m • Fluid temperature 3 °C to 35 °C, for short periods up to 3 min. max. 90 °C • Cable length 3 to 10 m, depending on type • Free ball passage 10 mm • Pressure port Rp 1¼, hose connection 35 mm (TM 32/...), 32 mm (R1) for TS/ TSW

Technical data • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz • Protection class IP 68 • Submersion depth 5 to 10 m • Fluid temperature 3 °C to 35 °C • Free ball passage 10 mm • Pressure port, depending on type Rp 1½, Rp 2 or Rp 2½

Technical data • Operating mode S1 • Max. fluid temperature 40 °C • Protection class IP 68 • Sealed by double mechanical seal • Maintenance-free roller bearing

Technical data • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz • Fluid temperature 3 °C to 35 °C • Free ball passage, depending on type 5 to 12 mm • Connection Rp 1½ to G3

Equipment/function • Ready-to-plug • Motor monitoring via temperature • Sheath current cooling • Connection cable • Hose connection • Turbulator (TMW, TSW) • Float switch (depending on type) • Non-return valve enclosed (depending on type)

Equipment/function • Ready-to-plug versions also with float switch • Thermal motor monitoring • Explosion protection for TS 50 and TS 65 • Connection cable 10 m • Connection cable detachable • Integrated non-return valve for TS 40 • Hose connection for TS 40

Equipment/function • Mechanical seal independent of direction of rotation • Heavy-duty motors (oil-filled and dry) ensure permanent operation even with non-immersed motor • Corrosion-resistant components

Equipment/function • Portable self-priming centrifugal pump

Special features • TMW, TSW with turbulator for constantly clean pump sump • No fluid-related odour formation • Easy installation • High operational reliability • Easy operation

Special features • Inox & composite • Low weight • Detachable connection cable • Detachable float switch for model A • Thermal motor monitoring for AC motor without switchgear

Special features Modular material system: • Normal cast iron version • Wear protection due to ceramic coating • Pump components made of Abrasite (chilled cast iron) • With Ex protection, depending on type

Special features • High operational reliability • Easy handling • Easy operation

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Submersible drainage pumps Series Wilo-Drain TMT Wilo-Drain TMC

Pedestal pumps Series Wilo-Drain VC

Submersible sewage pumps with macerator Series Wilo-Drain MTC… Wilo-Drain MTS…

Submersible sewage pumps Series Wilo-Drain TC 40

Design Submersible drainage pumps

Design Vertical drainage pumps

Design Submersible sewage pumps with macerator

Design Submersible sewage pump

Application For industrial applications, e.g. for condensate, hot water and aggressive fluids.

Application For pumping wastewater/fluids up to 95 °C • From pump sumps • With condensate • From basements at risk of flooding

Application For pumping sewage containing faeces and municipal and industrial sewage, including fibrous matter for pressure drainage, house and site drainage, sewage and water management and environmental and water treatment technology

Application For pumping heavily contaminated fluids for house/site drainage, sewage (not within the scope of DIN EN 12050-1) and water management and environmental and water treatment technology

Q max. 22 m³/h

Q max. 17 m³/h

Q max. 22 m³/h

H max. 13 m

H max. 20 m

H max. 55 m

H max. 10 m

Technical data • Mains connection 3~400 V, 50 Hz • Protection class IP 68 • Submersion depth max. 5 m • Fluid temperature 95 °C, 65 °C non-immersed • Cable length 10 m • Free ball passage 10 mm • Pressure port, depending on type Rp 1¼ or Rp 1½

Technical data • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz • Protection class IP 54 • Fluid temperature +5 °C to +95 °C • Free ball passage 5 or 7 mm, depending on type • Pressure port, depending on type Rp 1 or Rp 1½

Technical data • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz • Immersed operating mode: S1 / S3 25% (depending on type) • Protection class: IP 68 • Insulation class: F • Thermal winding monitoring • Max. fluid temperature: 3–40 °C

Technical data • Mains connection: 1~230 V, 50 Hz • Immersed operating mode: S1, S3 25% • Protection class: IP 68 • Insulation class: B • Thermal winding monitoring • Max. fluid temperature: 3–40 °C • Free ball passage: 35 m • Max. immersion depth: 5 m

Equipment/function • Pump housing and impeller made of grey cast iron, bronze or stainless steel, depending on version

Equipment/function • Attached float switch • Capacitor box (VC 32, 1~)

Equipment/function • Heavy-duty version made of cast iron • Unimpeded flow to the impeller • Maceration of substances being pumped • Simple installation via suspension unit or pump base • Attached float switch (only model A)

Equipment/function • Ready-to-plug • Including float switch • Thermal motor monitoring

MTC: • External macerator MTS: • Innovative patented macerator • Internal rotating blade • Spherically formed macerator • Pulling cut (shearing cut) Special features • High temperature resistance • Also suitable for aggressive fluids

Special features • Long service life • Easy commissioning • Connection outside the fluid • Long downtimes possible • Integrated motor protection due to thermal relay and control electrode

Special features • Submersible • Oil barrier chamber • High degree of efficiency • Mechanical seal on pump side made of solid silicon carbide material • External hardened macerator (MTC) • Internal, spherically formed macerator (MTS) • Longitudinally watertight cable • Version with Ex protection (depending on type)

Special features • Submersible • Heavy-duty hydraulic housing made of cast iron • Easy operation due to the attached float switch • Integrated stainless steel pump base for easy installation • Free ball passage: 40 m

Information Online catalogue www.wilo.com

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Drainage and sewage

Field of application Drainage and sewage

tion

Product category Submersible sewage pumps Series Wilo-Drain STS 40 Wilo-Drain STS 65

tion

xtensio Series e

odifica

Series m

Field of application Drainage and sewage

Series m

Product category Submersible sewage pumps Series Wilo-Drain TP 50 Wilo-Drain TP 65

Product category Submersible sewage pumps Series Wilo-EMU FA 05 … to FA 15 …

Product category Submersible sewage pumps Series Wilo-Drain TP 80 Wilo-Drain TP 100 Wilo-Drain TP...-AM

Design Submersible sewage pumps

Design Submersible sewage pump for industrial applications

Application For pumping heavily contaminated fluids containing faeces (STS 65 …), for house and site drainage, sewage (not within the scope of DIN EN 12050-1) and water treatment technology and industrial and process engineering

Application For pumping heavily contaminated fluids, for house and site drainage, sewage (not within the scope of DIN EN 12050-1) and water management, environmental and water treatment technology and industrial and process engineering

Application For pumping sewage with solid constituents in water treatment systems and pumping stations; local drainage, water control and process water extraction; applications in construction and industry

Application For pumping heavily contaminated fluids, for environmental and water treatment technology and industrial and process engineering

Q max. 70 m³/h

Q max. 60 m³/h

Q max. 103 m³/h

Q max. 180 m³/h

H max. 22 m

H max. 21 m

H max. 51 m

H max. 21 m

Technical data • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz • Immersed operating mode: S1, S3 25% • Surfaced operating mode STS 65 …: S2-8 min or S1 in CS version • Protection class: IP 68 • Insulation class: --STS 40 … : B --STS 65 … : F • Thermal winding monitoring • Max. fluid temperature: 3–40 °C • Free ball passage: 40 or 65 mm • Max. immersion depth: 5–10 m

Technical data • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz • Immersed operating mode: S1, S3 25% • Protection class: IP 68 • Insulation class: F • Thermal winding monitoring • Max. fluid temperature: 35 °C • Free ball passage: 44 m • Max. immersion depth: 10 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Surfaced operating mode: S2-15 or S2-30 (depending on type) • Thermal motor monitoring • Protection class: IP 68 • Insulation class: F • Max. fluid temperature: 40 °C • Free ball passage of 35 to 100 mm • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1, S3 25% • Surfaced operating mode: S1, S3 25% • Protection class: IP 68 • Insulation class: F • Thermal winding monitoring • Sealing chamber control • Max. fluid temperature: 40 °C • Free ball passage: 80 or 100 mm • Max. immersion depth: 20 m

Equipment/function • AC variant ready-to-plug • A-model including float switch • Thermal motor monitoring • CS version with cooling jacket for dry well installation

Equipment/function • AC variant with capacitor box • A-model including float switch and plug • Thermal motor monitoring • ATEX approval (TP 65 3~ without float)

Equipment/function • Heavy-duty version made of cast iron • Simple installation via suspension unit or pump base

Equipment/function • Thermal motor monitoring • Sealing chamber monitoring • ATEX approval (not for model "AM") • Sheath current cooling • Model "AM" with float switch, CEE plug and transport frame

Special features • Submersible • Connection cable detachable • Dry motor, stainless steel version • Attached float switch (A-model) enables easy operation • Integrated pump base (STS 40) for easy installation • Free ball passage: 40–65 mm • STS 65 with connection to a discharge pipeline DN 80 complies with DIN EN 12050-1 • No switchgear needed for thermal fuse protection (STS 40...) • Integrated thermal motor protection (1~/3~) and phase failure protection (3~) for STS 40 … • Longitudinally watertight cable version (STS 65F …) • ATEX approval (STS 65F …)

Special features • Submersible • Detachable connection cable • Dry motor, stainless steel version • ATEXcertified (TP 65 3~ without floater) • Attached float switch (A-model) enables easy operation • Low weight • Wide range of pump curves • Motor housing optional in 1.4435

Special features • Operation in stationary and portable wet well installation • Submersible • Heavy-duty version made of cast iron • Easy installation due to suspension unit or pump base • Longitudinally watertight cable lead-in • ATEX approval

Special features • Stainless steel & composite • ATEX approval (not for model "AM") • Low weight • Detachable connection cable • Standard-equipped with cooling jacket • Corrosion-resistant (e.g. swimming pool water, salt water, etc.)

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Heating, air-conditioning, cooling

Field of application Drainage and sewage

Product category

xtensio Series e

Product category Condensate lifting units Series Wilo-DrainLift Con Wilo-DrainLift Con Plus

Wastewater lifting units Series Wilo-DrainLift TMP

Wastewater lifting units for underfloor installation Series Wilo-DrainLift Box

Small sewage lifting units Series Wilo-DrainLift KH 32

Design Condensate lifting units

Design Wastewater lifting units

Design Wastewater lifting units for underfloor installation

Design Small sewage lifting units

Application For automatic drainage of showers, washbasins, washing machines/ dishwashers or for pumping wastewater and drainage water that is free of faeces, fibres, grease and oil and non-aggressive rainwater.

Application For concealed floor installation, can be used to drain • Rooms at risk of flooding • Garage entrances • Basement stairways • Showers, washbasins, washing machines, dishwashers

Application For disposal of sewage from a single toilet (free-standing toilets) and e.g. an additional washbasin that cannot be discharged to the sewer system via the natural fall

Q max. 0.6 m³/h

Max. intake/h with S3 operation 156 (900 L)

Max. intake/h with S3 operation 900...1320 L

Max. intake/h with S3 operation 260 L

H max. 5.4 m

operating mode S3-10 % / S3-25 %

operating mode S3 -25 %

Technical data • Mains connection 1~230 V, 50 Hz • Fluid temperature max. 80 °C • Protection class IP 20 • Pressure port 10 mm • Inlet connections 19/30 mm • Gross tank volume 1.5 l (2 l)

Technical data • Mains connection 1~230 V, 50 Hz • Fluid temperature max. 35/45 °C, for short periods (3 min.) 75/90 °C • Ventilation connection 25/32 mm • Protection class IP 44/67 • Gross tank volume 17/32 l • Switching volume 2.6/15 l

Technical data • Mains connection 1~230 V, 50 Hz • Fluid temperature max. 35 °C • Protection class IP 67 • Gross tank volume 85 l • Switching volume: 22 l for type 40/10: 30 l

Technical data • Mains connection 1~230 V, 50 Hz • Fluid temperature max. 35 °C • Free ball passage 10 mm • Protection class IP 44 • Gross tank volume 17 l • Switching volume 2.6 l

Equipment/function • Ready-to-plug system • Level control with pneumatic pressure transducer (TMP 32) • Integrated non-return valve • Fixation material • Integrated active carbon filter (TMP 32) • Integrated submersible pump of the TMW series (TMP 40)

Equipment/function • Ready-to-plug system • Plastic tank with ready-mounted drainage pump, control, pressure pipe and integrated non-return valve • Mains connection cable with shockproof plug • Motor monitoring via temperature (WSK) • Level control with float switch

Equipment/function • Ready-to-plug system • Level control with pneumatic pressure transducer • Non-return valve • Inlet seal • Kit for pressure pipe connection • Fixation material • Integrated active carbon filter

Special features • Low-noise operation (≤ 43 dB[A]) • 2/4 inlet openings • Standard alarm contact (NC/NO contact) • Easy to install • Motor unit reversible by 180° • Variable inlets/drains • Suitable for condensates with a pH value ≥2.4

Special features • Modern design • Shower drain with a height of 110 mm possible (only in conjunction with TMP 32-0,5) • Low-noise operation • Service-friendly due to integrated submersible pump (TMP 40)

Special features • Easy to install due to integrated pump and non-return valve • Large tank volume • Easy to maintain • Pumps with pressure pipe that can be pulled • Stainless steel tile frame with trap

Special features • Modern, space-saving design • Easy installation due to self-sealing, direct toilet connection

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage and Heating, air-conditioning and cooling

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Drainage and sewage

Field of application Drainage and sewage

tion odifica Series m 1/8 and M2/8 M ft Li Drain

Product category Small sewage lifting units for front wall installation Series Wilo-DrainLift XS-F

Product category Compact sewage lifting units with 1 integrated pump Series Wilo-DrainLift S

Product category Sewage lifting units with 1 or 2 integrated pumps Series Wilo-DrainLift M Wilo-DrainLift L

Product category Sewage lifting unit with 2 integrated pumps Series Wilo-DrainLift XL

Design Small sewage lifting units

Design Compact sewage lifting units with integrated pump

Design Sewage lifting units with 1 or 2 integrated pumps

Design Sewage lifting unit with 2 integrated pumps

Application For the sewage disposal of a single toilet (wall-mounted WC) in addition to a hand washbasin, a shower or bidet, the wastewater/sewage of which cannot be discharged to the sewer system via the natural fall

Application For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall

Max. intake/h with S3 operation 120 L

Max. intake/h with S3 operation 600 L

Max. intake/h with S3 operation 1050...3600 L

Max. intake/h with S3 operation 15600 L

operating mode S3 -30 %

operating mode S3-15 %, 120 s

operating mode S3-15 %, 80 s or 120 s

operating mode S3-60 %, 120 s

Technical data • Mains connection 1~230 V, 50 Hz • Fluid temperature max. 35 °C • Free ball passage 25 mm • Protection class IP 44 • Tank volume 7.9 l • Switching volume 1.2 l

Technical data • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz • Max. fluid temperature 35 °C, for short periods 60 °C • Protection class (without switchgear) IP 67 • Gross tank volume 45 l • Switching volume 20 l

Technical data • Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz • Max. fluid temperature 40 °C, for short periods 60 °C • Protection class (without switchgear) IP 67 • Gross tank volume, depending on type, of 62 to 140 l • Switching volume 24 to 50 l, depending on type

Technical data • Mains connection 3~400 V, 50 Hz • Operating mode: S1; S3 • Fluid temperature max. 40 °C, for short periods 60 °C • Protection class IP 67 • Tank volume 380 l • Switching volume 260 l

Equipment/function • Ready-to-plug system for front wall installation • Level control with pneumatic pressure transducer • Potential-free contact • Non-return valve • Inlet seals • Kit for pressure pipe connection • Fixation material • Active carbon filter

Equipment/function • Ready-to-plug • Thermal motor monitoring • Level control with pneumatic pressure transducer • Potential-free contact • Pump cable detachable • Non-return valve • Inlet seal • Hole saw for inlet borehole • Hose connection for ventilation • Hose connection for diaphragm hand pump • Fixation material • Soundproofing material

Equipment/function • Ready-to-plug • Thermal motor monitoring • Level control with float switch • Mains-independent alarm • Potential-free contact • Pump cable detachable • Non-return valve (RV version) • Inlet seal • Hole saw for inlet borehole • Hose connection for ventilation • Kit for pressure pipe connection • Fixation material • Soundproofing material • Switchgear

Equipment/function • Thermal motor monitoring • Level control with level sensor • Potential-free contact • Pump cable detachable • Inlet seal DN 150 • Keyhole saw for inlet seal • Non-return valve • Hose connection for ventilation • Hose connection for diaphragm hand pump • Kit for pressure pipe connection • Fixation material • Switchgear with breakdown barrier

Special features • Quiet operation for high user comfort • Reliable due to integrated alarm • Large scope of delivery (all sleeves, non-return valve, ventilation set with active carbon filter etc.)

Special features • Easy to install due to: --Low weight --Large scope of delivery • Flexible due to: --Freely selectable inlets --Front-wall-like installation --Space-saving installation (depth 30 cm) • Safe due to: --Reliable pneumatic level measurement

Special features • Easy to install due to: --Low weight --Only one pressure outlet with doublepump system (integrated Y-pipe) --Built-in non-return valve • Flexible due to: --Freely selectable inlets • Safe due to: --Large tank volume --Mains-independent alarm function --Additional potential-free contact --Integrated thermal motor protection • Maintenance interval display and early error detection (DrainLift M2/8)

Special features • Easy installation / commissioning due to --Built-in non-return valve --Higher flexibility in the intake area (connection is height-adjustable and can be swivelled) --Menu-prompted setting on switchgear • Safe due to: --Large switching volume --Additional potential-free contact --Reliable level measurement due to level sensor --Suitable for permanent operation (due to integrated sheath current cooling)

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Sewage lifting unit with 2 dry-mounted pumps Series Wilo-DrainLift XXL

Pumps station with synthetic tank Series Wilo-DrainLift WS 40 Basic Wilo-DrainLift WS 40-50

Pumps station with synthetic tank Series Wilo-DrainLift WS 625

Pumps station with synthetic tank Series Wilo DrainLift WS 830 Wilo-DrainLift WS 900 Wilo-DrainLift WS 1100

Design Sewage lifting unit with 2 dry-mounted pumps

Design Pumps station with synthetic tank or as sewage lifting unit in the building

Design Pumps station with synthetic tank

Design Pump stations with synthetic tanks, as a single- or double-pump system

Application For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall

Max. intake/h with S3 operation 26400...55200

Q max. 60 m³/h

Q max. 15 m³/h

Q max. 180 m³/h

Operating mode S3-25%, 60 s

H max. 27 m

H max. 55 m

Technical data • Mains connection 3~400 V, 50 Hz • Operating mode S1, S3 • Max. fluid temperature 40 °C, for short periods 60 °C • Protection class (without switchgear) IP 68 • Gross tank volume 400/800 l • Switching volume 305 ... 630 l

Technical data • Synthetic pumps station made of recyclable PE • Maximum upward pressure reliability and inherent stability due to finning • Inlets freely selectable on site • For supply line in DN 100 • Ventilation pipe connection in DN 70 • Max. pressure in the pressure pipe 6 bar

Technical data • Synthetic pumps station made of recyclable PE • Highest degree of upward pressure reliability due to finning • Available in 4 heights, 1,200, 1,500, 1,800 and 2,100 mm • Sump covers in the standard versions, can be walked on or driven over • Max. pressure in the pressure pipe 6 bar (MTS 40) or 4 bar

Technical data • Synthetic pumps station made of recyclable PE • Maximum upward pressure reliability due to 2 or 4 lateral fins • 2/4 inlets can be selected onsite • Maximum stability due to moulded hemispherical shape of the sump floor • Wilo surface coupling • Good accessibility of the level sensor due to installation with hinged supporting bar • Max. traffic load 5 kN/m² (in accordance with DIN EN 124, Group 1) • Max. pressure in the pressure pipe 6 bar

Equipment/function • Sheath current cooling • Thermal motor monitoring and leakage detection • Level control with level sensor • Potential-free contact • Pump cable detachable • Hose connection for ventilation • Hose connection for diaphragm hand pump • Kit for pressure pipe connection • Fixation material • Switchgear with breakdown barrier in the housing

Equipment/function Wilo-Drain pumps that can be used: TC 40 TP 50 TP 65 MTS 40/21 … 27

Equipment/function Wilo-Drain pumps that can be used: TMW 32 TC 40 STS 40 MTS 40/21 … 27

Equipment/function Wilo-Drain pumps that can be used: TS 40 TP 50 TP 65 STS 65 TP 80 MTC 32 MTC 40 MTS 40

Special features • Large tank volume • Low weight • Wide performance range • Suitable for permanent operation (due to integrated sheath current cooling)

Special features • Freely selectable inlets • Flexible use: As lifting unit inside buildings or as pumps station outside buildings. • Large tank volume (255/400 l) • Flexible installation due to optional sump length extension • Easy installation and maintenance of the pumps due to surface coupling when Wilo-Drain pumps TP 50 and/or TP 65 are used • Also with macerator pumps Wilo-Drain MTS 40/21 … 27

Special features • Small sump diameter (625 mm) • Flexible use due to different installation heights • Complete due to integrated fittings and seals • Can be walked on or driven over, depending on optional cover • Also with Wilo-Drain MTS 40/21...27 macerator pump

Special features • Deposit-free collection space • Maximum strength due to hemispherically shaped sump floor • 2/4 inlets can be selected onsite • stainless steel pipework • Also with Wilo-Drain MTS 40...3240 macerator pump • New generation of pump stations for pressure drainage (WS 830)

Information Online catalogue www.wilo.com Building Services catalogue, Drainage and Sewage

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Building Services

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management. Pump and pump systems for water supply and sewage disposal and sewage treatment in municipal buildings.

Highlands water project Lesotho, Africa. Needs-based operation. The Task: To transfer water from rain-rich Lesotho to the drier industrial region of South Africa around Johannesburg. The water is taken from the Mohale Dam and transported 32 km to the Katse Dam. The Solution: Wilo delivered two submersible pumps with needs-based throttling due to the large difference between the two water levels.

Water supply.

Sewage disposal.

Sewage treatment.

Wilo-EMU KM 1300 + NU 911 submersible pumps. Perfect for water supply/transport.

Wilo-EMU FA submersible pump. High operating reliability in sewage disposal.

Wilo EMU Megaprop TR 326 Submersible mixer. Enormous energy savings in water purification.

Pumping station Tuzla, Turkey Reliable sewage disposal. The Task: The municipal sewage treatment facility in Tuzla cleans sewage produced by 4.5 million residents from 7 regions in the dormitory towns around Istanbul. Sewage collection is ensured by means of 2 separate subterranean sewer systems. Afterwards, the sewage must be raised above a level gap of -8.47 m to supply it to the wastewater treatment plant. 2 pump stations are in continuous use here. The Solution: Wilo supplied reliable submersible pumps of type Wilo-EMU FA 50. All pumps are fitted with a ceramic coating here.

Wastewater treatment plant Atlanta, USA For minimum life cycle costs. The Task: To increase efficiency in the fields of mixed media, purification and food filtration. The Solution: Wilo supplied 134 high-efficiency and low-wearing submersible mixers due to their flawless operation and the enormous energy savings during the test phase – right up to today!

High competence for water and sewage. Clean water is becoming increasingly scarce. This makes the sourcing and transportation of valuable water a ceaseless challenge. In view of the variety of sources, e.g. desalinated seawater or aquifers, treatment systems must be more flexible to meet the different compositions of the water. Pumps and components from Wilo are able to supply the fluid for as efficiently and for as long as possible in the best possible way. When it comes to environmental protection and preserving natural resources, sewage disposal and sewage treatment play an important part. Ongoing challenges such as the increasing content of solid in sewage which makes operating conditions for plants and equipment more difficult create a need for innovative approaches. Wilo offers the right solution for any application: with the highest safety standards and lowest costs.

Wilo Online catalogue. All pumps for the Water Management segment at a glance.

Product overview. Water Management. 37

Water supply

from page 38

Pumps, pump systems and accessories for > Water supply and pressure boosting > Clean water treatment > Raw water intake > Desalination > Commercial agriculture Special applications.

from page 38 to 49

Pumps, pump systems and accessories for applications in energy generation and leisure area, as well as services for pump systems. Drainage and sewage

from page 42

Pumps, pump systems and accessories for > Wastewater collection and transport > Sewage treatment > Dewatering and flood protection

Water Management Field of application Water supply

Field of application Water supply

Product category

Standard glanded pumps Series Wilo-CronoNorm NL Wilo-VeroNorm-NPG

Axially split case pumps Series Wilo-SCP

Design Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate.

Design Low-pressure centrifugal pump with axially split housing mounted on a baseplate

Application For pumping heating water in accordance with VDI 2035, water/glycol mixtures, cooling/cold water and process water. For applications in municipal water supply, irrigation, building services, industry, power stations etc.

Q max. 3,000 m³/h

Q max. 3,400 m³/h

H max. 140 m

H max. 245 m

Technical data • Perm. temperature range -8 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter on suction side DN 65 to DN 500 • Nominal diameter on pressure side DN 50 to DN 400 • Max. operating pressure: depending on type 16 or 25 bar

Equipment/function 1- or 2-stage, low-pressure centrifugal pump in monobloc design • Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics • Shaft seal with mechanical seal or stuffing box • 4-pole and 6-pole motors

Materials: • Pump housing: EN-GJL-250 • Impeller: EN-GJL-250 • Shaft: 1.4028

Materials: • Pump housing: EN-GJL-250 • Impeller: GCuSn5 ZnPb • Shaft: X12Cr13

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power motors with IE2 technology • Other materials and versions on request

Special features • Higher capacities up to 17,000 m³/h on request • Special motors and other materials on request

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Water supply

tension Series ex

Product category Vertical, multistage centrifugal pumps Series Wilo-Helix-V

Field of application Water supply

tion odifica Series m

tension Series ex

Product category Vertical, multistage centrifugal pumps Series Wilo-Helix-VE

Product category Vertical, multistage centrifugal pumps Series Wilo-Multivert MVI

tension Series ex

Product category Vertical, multistage centrifugal pumps Series Wilo-Multivert-MVIE

Design Non-self-priming multistage pump

Design Non-self-priming multistage pump with integrated frequency converter

Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Washing systems • Irrigation

Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems

Q max. 35 m³/h

Q max. 45 m³/h

Q max. 155 m³/h

Q max. 145 m³/h

H max. 232 m

H max. 234 m

H max. 235 m

H max. 245 m

Technical data • Fluid temperature -20 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges

Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55

Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16 bar/25 bar • Inlet pressure max. 6 bar • Protection class IP 54 or IP 55

Equipment/function • Impellers and stage chambers made of 1.4307 stainless steel, pump housing made of EN-GJL-250 cast iron, cataphoretic-coated • Versions with 1.44xx stainless steel designed for aggressive fluids • Versions --PN16 with oval flanges and PN25 with round DIN flanges --Helix V22, 32, 52 PN16 and PN25 with round loose flanges as per ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor

Equipment/function • Impellers and stage chambers made of 1.4307 stainless steel, pump housing made of EN-GJL-250 cast iron, cataphoretic-coated • Versions with 1.44xx stainless steel designed for aggressive fluids • PN16 and PN25 versions with round loose flanges in accordance with ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor • Integrated frequency converter

Equipment/function • Stainless steel pump in in-line design • Version • PN16 with oval flanges • PN16/25 with DIN round flanges; Victaulic connections depending on pump • IE2/IEC standard three phase motor, 2-pole, AC or DC version. Single-phase AC motor with integrated thermal motor protection

Equipment/function • Stainless steel pump in in-line design • PN16 with oval flanges • PN16/25 with DIN round flanges; Victaulic connections depending on pump • Single-phase or three-phase current standard motor • Integrated frequency converter • Integrated thermal motor protection • Protection against low water level

Special features Helix V22 • Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics • Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid

Special features Helix VE22 • Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics • Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. • User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance • Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Water supply

Field of application Water supply

tension Series ex

Product category Sprinkler pumps with VdS approval Series Wilo-EMU sprinkler pumps

Product category

Submersible pumps Series Wilo-Sub TWU 6 … Wilo-Sub TWU 8 …

Submersible pumps Series Wilo-Sub TWI 4 … Wilo-Sub TWI 6 … Wilo-Sub TWI 8 … Wilo-Sub TWI 10 …

Product category Submersible pumps Series Wilo-EMU 6" series Wilo-EMU 8" series Wilo-EMU 10"…24“ series

Design Sprinkler pump in sectional design

Design Submersible pump, multistage

Design Submersible pump with sectional construction

Application For supplying sprinkler systems

Application Water supply from boreholes and cisterns; sprinkling and irrigation; for lowering the water level; for pumping water without long-fibre and abrasive constituents

Application Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; utilisation of geothermal energy and offshore applications; supplying fountains, snow cannons and water organs

Q max. 580 m³/h

Q max. 132 m³/h

Q max. 165 m³/h

Q max. 2400 m³/h

H max. 140 m

H max. 380 m

H max. 500 m

H max. 560 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Max. fluid temperature: 20...30 °C • Min. flow at motor: 0.1 ... 0.5 m/s • Max. sand content: 35 g/m³ • Up to 10 starts per hour • Max. immersion depth: 100 or 300/350 % • Protection class: IP 68 • Control range for frequency converter: 25...50 or 30...50 Hz

Equipment/function • Immersible, multistage submersible pump • Radial or semi-axial impellers • Integrated non-return valve • NEMA coupling • Three-phase motor • Hermetically cast motors

Equipment/function • Immersible, multistage submersible pump • Radial or semi-axial impellers • Hydraulics and motor freely configurable according to power requirements • Integrated non-return valve (depending on type) • NEMA coupling or standardised connection (from 10" motors on) • Three-phase motor for direct or stardelta start.

Special features • Impellers made of bronze • Integrated non-return valve • Immersion depth up to 350 m • Vertical and horizontal installation possible

Special features • Water pumping with large volume flows • Corrosion-resistant impellers • Wear-resistant GI bushing (depending on type) • Special materials possible • Individual adjustment to duty point due to impeller correction • 4-pole motors for long service life and high degree of efficiency • Motors with CoolAct technology for high power density (from 10" motors on) • High voltage up to 6000 V possible • Vertical and horizontal installation possible • Ceram CT coating possible to increase effectiveness • Pressure shroud installation option

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Water supply

Field of application Water supply

Product category

Submersible pumps Series Wilo-EMU bottom intake pumps

Vertical turbine pumps Series Series VMF, CNE, VAF

Design Submersible bottom intake pump

Design Dry installed vertical turbine pumps with immersed axial- or semi-axial hydraulics

Application Potable and process water from tanks or shallow bodies of water; municipal and industrial water supply; sprinkling and irrigation; lowering the water level; utilisation of geothermal energy and offshore applications;

Application For industrial or municipal water supply and • Irrigation • Fire-extinguishing water supply • Cooling water supply • Drainage and high water protection

Q max. 1.200 m³/h

Q max. 40.000 m³/h

H max. 160 m

H max. 450 m

Technical data • Mains connection: 3~400 V, 50 Hz • Max. fluid temperature: 20 °C • Min. flow at outside shroud: not necessary • Max. sand content: 35 g/m³ • Up to 10 starts per hour • Max. immersion depth: 300 m • Protection class: IP 68 • Control range for frequency converter: --2-pole: 25-50 Hz --4-pole: 30-50 Hz

Technical data • Perm. temperature range to 80 °C 105 °C • Nominal diameter DN 100 to DN 2000

Equipment/function • Immersible, multistage submersible pump • Semi-axial impellers • Hydraulics and motor freely configurable according to power requirements • Three-phase motor for direct or stardelta start. • Motors rewindable as standard

Equipment/function For installation types with pressure ports for underground, above-ground or twinroof installation • Design --as removable or permanent installation -- with axial or semi-axial, single or multistage hydraulics --with open shaft for bearing lubrication with the fluid or with shaft trim for separate bearing lubrication • Drive options: Electric motor, Diesel motor or steam turbine

Special features • Deep water lowering • Self-cooling design • Easy installation on the ascending pipe • Wear-resistant design due to different material versions • Compact design • Rewindable motors • Individual adjustment to duty point due to impeller correction • Ceram CT coating possible to increase effectiveness

Special features • Minimum surface area needed • High hydraulic efficiency • immersed pump hydraulics • Design to order as per customer specifications

Information Online catalogue www.wilo.com

Information Documentation on request

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Submersible drainage pumps Series Wilo-Drain TM/TMW/TMR 32 Wilo-Drain TS/TSW 32

Submersible drainage pumps Series Wilo-Drain TS 40 Wilo-Drain TS 50 Wilo-Drain TS 65

Submersible drainage pumps Series Wilo-EMU KS

Self-priming drainage pumps Series Wilo-Drain LP Wilo-Drain LPC

Design Basement drainage pump

Design Submersible drainage pumps

Design Submersible drainage pumps in rugged design for use on building sites

Design Dry-mounted and self-priming drainage pumps

Application For pumping wastewater with foreign matter of max. ø 10 mm for • House/site drainage • Environmental and water treatment technology • Industrial and process engineering

Application For drainage of excavation pits, cellar areas, pits and basins. Ideally suited for applications in fountains

Q max. 16 m³/h

Q max. 53 m³/h

Q max. 340 m³/h

Q max. 71 m³/h

H max. 12 m

H max. 25 m

H max. 71 m

H max. 29 m

Technical data • Operating mode S1 • Max. fluid temperature 40 °C • Protection class IP 68 • Sealed by double mechanical seal • Maintenance-free roller bearing

Technical data • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz • Fluid temperature 3 °C to 35 °C • Free ball passage, depending on type 5 to 12 mm • Connection Rp 1½ to G3

Equipment/function • Portable self-priming centrifugal pump

Special features • TMW, TSW with turbulator for constantly clean pump sump • No fluid-related odour formation • Easy installation • High operational reliability • Easy operation

Special features • Inox & composite • Low weight • Detachable connection cable • Detachable float switch for model A • Thermal motor monitoring for AC motor without switchgear

Special features • High operational reliability • Easy handling • Easy operation

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

Field of application Drainage and sewage

tion

odifica

Series m

Product category Submersible sewage pumps with macerator Series Wilo-Drain MTC… Wilo-Drain MTS…

Product category Submersible sewage pumps Series Wilo-Drain TC 40

Product category Submersible sewage pumps Series Wilo-Drain STS 40 Wilo-Drain STS 65

Product category Submersible sewage pumps Series Wilo-Drain TP 50 Wilo-Drain TP 65

Design Submersible sewage pumps with macerator

Design Submersible sewage pump

Design Submersible sewage pumps

Application For pumping heavily contaminated fluids for house/site drainage, sewage (not within the scope of DIN EN 12050-1) and water management and environmental and water treatment technology

Q max. 17 m³/h

Q max. 22 m³/h

Q max. 70 m³/h

Q max. 60 m³/h

H max. 55 m

H max. 10 m

H max. 22 m

H max. 21 m

Equipment/function • Ready-to-plug • Including float switch • Thermal motor monitoring

Equipment/function • AC variant ready-to-plug • A-model including float switch • Thermal motor monitoring • CS version with cooling jacket for dry well installation

Equipment/function • AC variant with capacitor box • A-model including float switch and plug • Thermal motor monitoring • ATEX approval (TP 65 3~ without float)

Special features • Submersible • Detachable connection cable • Dry motor, stainless steel version • ATEX certified (TP 65 3~ without floater) • Attached float switch (A-model) enables easy operation • Low weight • Wide range of pump curves • Motor housing optional in 1.4435

Information Online catalogue www.wilo.com

MTC: • External macerator MTS: • Innovative patented macerator • Internal rotating blade • Spherically formed macerator • Pulling cut (shearing cut)

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

Field of application Drainage and sewage

xtensio Series e

Product category Submersible sewage pumps Series Wilo-Drain TP 80 Wilo-Drain TP 100 Wilo-Drain TP...-AM

tion

odifica

Series m

Product category Submersible sewage pumps Series Wilo-EMU FA 05 … to FA 15 …

Design Submersible sewage pump for industrial applications

Design Submersible sewage pumps

Application For pumping heavily contaminated fluids, for environmental and water treatment technology and industrial and process engineering

Q max. 180 m³/h

Q max. 103 m³/h

H max. 21 m

H max. 51 m

Equipment/function • Thermal motor monitoring • Sealing chamber monitoring • ATEX approval (not for model “AM”) • Sheath current cooling • Model “AM” with float switch, CEE plug and transport frame

Equipment/function • Heavy-duty version made of cast iron • Simple installation via suspension unit or pump base

Special features • Stainless steel & composite • ATEX approval (not for model “AM”) • Low weight • Detachable connection cable • Standard-equipped with cooling jacket • Corrosion-resistant (e.g. swimming pool water, salt water, etc.)

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Submersible sewage pumps Series Wilo-EMU FA 05 … to FA 15 … Wilo-EMU FA 20 … to FA 25 … Wilo-EMU FA 30 … to FA 60 …

Submersible sewage pumps Series Wilo-EMU FA…RF

Submersible sewage pumps Series Wilo-EMU FA…WR

Submersible sewage pumps Series Wilo-EMU KPR …

Design Submersible sewage pump with dry motors or self-cooling motors

Design Submersible pumps made of cast stainless steel

Design Submersible sewage pump with mechanical stirring apparatus

Design Axial submersible pump with dry motor for use in pipe sumps

Application In water treatment applications or industrial applications

Application In grit chambers and for pumping sludge

Application For pumping cooling or rainwater, cleaned sewage and for irrigation and pumping sludge

Q max. 7950 m³/h

Q max. 70 m³/h

Q max. 72 m³/h

Q max. 9500 m³/h

H max. 87 m

H max. 30 m

H max. 27 m

H max. 8.4 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Surfaced operating mode with selfcooling motor: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C, higher temperatures on request • Sealing with rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on motor • Free ball passage of 35 to 170 mm • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C, higher temperatures on request • Sealing with two mechanical seals or one block seal cartridge, depending on motor • Free ball passage of 35 to 45 mm • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Surfaced operating mode with selfcooling motor: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C, higher temperatures on request • Sealing with rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on motor • Free ball passage of 23 to 58 mm • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C, higher temperatures on request • Sealing with two mechanical seals or one block seal cartridge, depending on motor • Free ball passage of 85 to 130 mm • Short common pump/motor shaft • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Equipment/function • Heavy-duty version made of cast iron • Self-cooling motors with 1or 2-chamber system • Simple installation via suspension unit or pump base

Equipment/function • Heavy-duty version made of cast stainless steel (1.4581) • Simple installation via suspension unit or pump base

Equipment/function • Heavy-duty version made of cast iron • Self-cooling motors with 1or 2-chamber system • Simple installation via suspension unit or pump base • Mechanical stirring apparatus is fastened directly to the impeller • Mixer head made of chilled cast iron, Abrasite

Equipment/function • Heavy-duty version made of cast iron

Special features • Operation in stationary and portable wet well and dry well installation • Submersible • Easy installation due to suspension unit or pump base • Special materials and coatings against abrasion and corrosion • Longitudinally watertight cable lead-in (depending on motor) • Adjustment of duty point by trimming the impeller

Special features • Operation in stationary and portable wet well installation • Submersible • Version made completely of cast stainless steel 1.4581 • Easy installation due to suspension unit or pump base • Longitudinally watertight cable lead-in • Adjustment of duty point by trimming the impeller

Special features • Operation in stationary and portable wet well installation • Submersible • Avoidance of deposits in the suction area of the pump • Easy installation due to suspension unit or pump base • Coatings against abrasion and corrosion • Longitudinally watertight cable lead-in (depending on motor) • Adjustment of duty point by trimming the impeller

Special features • Submersible • Special materials and coatings against abrasion and corrosion • Longitudinally watertight cable lead-in • Angle of propeller blades adjustable by hand

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Pumps station with synthetic tank Series Wilo-DrainLift WS 40 Basic Wilo-DrainLift WS 40-50

Pumps station with synthetic tank Series Wilo-DrainLift WS 625

Pumps station with synthetic tank Series Wilo DrainLift WS 830 Wilo-DrainLift WS 900 Wilo-DrainLift WS 1100

Solids separation system Series Wilo-EMUport FTS MG... Wilo-EMUport FTS MS... Wilo-EMUport FTS FG... Wilo-EMUport FTS FS...

Design Pumps station with synthetic tank or as sewage lifting unit in the building

Design Pumps station with synthetic tank

Design Pumps station with synthetic tanks, as single or twin pump system

Design Underground pumping station made of PEHD

Application For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall

Q max. 60 m³/h

Q max. 15 m³/h

Q max. 180 m³/h

Q max. On request

H max. 27 m

H max. 55 m

H max. On request

Technical data Pumps stations ready for connection • With dry-mounted sewage pumps and solids separation system • Available in shaft- (MS, FS) or building version (MG, FG)

Equipment/function Wilo-Drain pumps that can be used: TC 40 TP 50 TP 65 MTS 40/21 … 27

Equipment/function Wilo-Drain pumps that can be used: TMW 32 TC 40 STS 40 MTS 40/21 … 27

Equipment/function Wilo-Drain pumps that can be used: TS 40 TP 50 TP 65 STS 65 TP 80 MTC 32 MTC 40 MTS 40

Equipment/function • Solids separation system --Collection reservoir --2x solids tank --2x sewage pumps --complete piping network incl. feed and pressure connection and nonreturn valve

Special features • Low maintenance and operating costs • Pump room is dry, clean and odourless • the system remains fully functional even during the maintenance of a pump • Low wear

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

Field of application Drainage and sewage

xtensio Series e

Product category Wilo-EMU Miniprop Series TR 14 to TR 28

Field of application Drainage and sewage

Product category Wilo-EMU Uniprop without gear Series TR 22 to TR 40

xtensio Series e

Product category Wilo-EMU Uniprop with gear Series TR 50-2 to TR 90-2 TRE 90-2 with IE3 motor

xtensio Series e

Product category Wilo-EMU Maxi-/Megaprop with gear Series TR 216 to TR 226 TR 316 to TR 326 TRE 221/TRE 321 with IE3 motor

Design Compact directly driven submersible mixer

Design Submersible mixer with single-stage planetary gear

Design Slow-running submersible mixer with two-stage planetary gear

Application Swirling of deposits and solids in rain spillway basin and pump sump; destruction of floating sludge layers; other areas of application in agriculture and water supply

Application Application in activated sludge tanks and sludge tanks for creation of fluid current, suspension of solids, homogenisation and prevention of floating sludge layers; other areas of application in industry, agriculture and water supply

Application Energy-optimised mixing and circulation of activated sludge; generation of flow rates in circulation channels; further areas of application in industry

Q max. Thrust: 45 - 330 N

Q max. Thrust: 185 - 1100 N

Q max. Thrust: 350 - 3940 N

Q max. Thrust: 470 - 4340 N

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C • Mechanical seal with SiC/SiC combination • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C • Single-stage planetary gear • Mechanical seal with SiC/SiC combination • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C • Two-stage planetary gear with exchangeable second planetary stage • Mechanical seal with SiC/SiC combination • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m

Equipment/function • Stationary installation on walls and floors • Flexible installation through the use of lowering device or special pipe attachment • Can be swivelled vertically and horizontally for installation with lowering device

Equipment/function • Stationary installation on walls and floors • Flexible installation through the use of lowering device • Can be swivelled vertically and horizontally for installation with lowering device

Equipment/function • Stationary installation on walls • Flexible installation through the use of lowering device • Can be swivelled horizontally for installation with lowering device • Installation with stand allows free placement in basin • Single-stage planetary gear

Equipment/function • Installation with stand allows free placement in basin • Flexible installation • Two-stage planetary gear with exchangeable second planetary stage

Special features • Submersible • Low power consumption • Low weight • ATEX and FM versions • Self-cleaning propeller with helix hub • Easy-to-install propeller attachment • Propeller in steel or PUR version • Optional: Motor shaft made of 1.4462 material

Special features • Submersible • Self-cleaning propeller with helix hub • Easy-to-install propeller attachment • Propeller in steel or PUR version • ATEX and FM versions

Special features • Submersible • Single-stage planetary gear for adjusting the propeller speed • Self-cleaning propeller • Easy-to-install propeller attachment • Propeller in steel, PUR or PUR/GFK version • ATEX and FM versions • 1.4462 gear shaft • Type "TRE" with IE3 performance optimised motors

Special features • Submersible • 2-stage planetary gear for adjusting the propeller speed • Self-cleaning propeller • Propeller blades can be replaced individually • Easy-to-install blades and hub • Propeller in GFK version • ATEX and FM versions • 1.4462 gear shaft • "TRE" type with high performance motors according to IE3

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management Field of application Drainage and sewage

tion

odifica

Series m

Product category Wilo-EMU Rezijet Series RZP 20 to RZP 80-2

Design Submersible mixers with housing unit, direct driven (RZP 20 …, RZP 25-2 … RZP 40...) or with 1-stage planetary gear (RZP 50-3 …, RZP 60-3 …, RZP 80-2 …) Application For pumping sewage via low delivery heads at high flow rates, e.g. between balancing, nitrification and denitrification basins; for pumping process, raw, pure and cooling water, e.g. in paint finishing systems or for potable water treatment; generation of fluid current in water channels, e.g. amusement parks Q max. 6800 m³/h H max. 1,1 m Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 • Protection class: IP 68 • Max. fluid temperature: 40 °C • Units are directly driven or with singlestage planetary gear • Mechanical seal with SiC/SiC combination • Permanently lubricated anti-friction bearing • Max. immersion depth: 12.5 m Equipment/function • Stationary installation directly on flow pipe • Flexible installation through the use of lowering device • Vertical or in-line installation possible Special features • Submersible • Vertical or in-line design • Self-cleaning propeller, partially with helix hub • Propeller in steel or PUR version • ATEX and FM versions Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Water Management

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry. Pump and pumping systems for cooling water and heating circuits, raw water intake, water and fire extinguishing water supply and for water treatment and sewage disposal.

Anpara power plant, India. Efficiency writ large. The Task: The Anpara power plant is the largest one in Uttar Pradesh with an output of 1,630 MW. Plants of this size need a continuous supply of very large amounts of coolant The Solution: Wilo developed its most powerful system yet. Each one of the 5 pipe housing pumps in Anpara delivered a flow of 35.600 m続/h. Besides the very high flow rate, the customer also specified a very high efficiency level of 90%.

Raw water intake.

Lime water circuit.

Process water disposal.

Wilo vertical turbine pump. New dimensions for transporting water.

Wilo-EMU FA submersible pump. Best wear protection.

Wilo-EMU KM submersible water pump. Needs-based water supply.

Salzgitter Flachstahl GmbH, Salzgitter, Germany. In the exact climate control of special office, production or storage spaces and low-temperature applications, Wilo pumps have also shown their worth – also in fire extinguisher systems and water supply, disposal and treatment. The Task: Following the expansion of the warm water rolling mill, the increased production increased the load on the scale-forming water from 8,000 to 11,000 m³/h. This made a second circuit necessary. The Solution: A highly wear resistant Wilo-EMU FA 30 submersible motor pump came into use. It managed a service life of over one year and was easily replaced by two technicians in just two days. A comparison with previously installed standard pumps: a considerable reduction in life cycle costs.

Paulaner Brauerei GmbH & Co KG, Munich, Germany. Brewery water supply on tap. The Task: For brewing and additional process steps, such as e. g. bottle cleaning, the brewery needs around 900,000 m³ water per year. This high water requirement should be met by 5 up to 240m deep wells. The Solution: Each well was equipped with a multistage heavy-duty submersible pump Wilo-EMU N 82 . From a depth of 80 m these 5 pumps serve the fluctuating water demand during running beer production. The variable speed pump controls with frequency converters ensure needs-based and an extremely energy-efficient water supply.

Highest priority at lowest energy consumption. The transport of fluids of a wide variety of types is the basis for many industrial production processes. Wilo pumps and systems for business and industry guarantee a high degree of reliability, flexibility and efficiency. Our particular strength lies in applications in the process-supporting periphery–in such a diverse range of areas such as the food and metal industry, mining and electricity generation. Also in the precise climate control of special office, production or storage rooms such as in low-temperature applications, Wilo pumps do not fail to convince – also in fire extinguishing technology and water supply, drainage and treatment. Our recognised expertise results from a mature product range, joined up knowledge and effective quality management.

Wilo Online catalogue. All pumps for the Industry segment at a glance.

Product overview. Industry. 53

Industrial processes

from page 54

Pumps for process-supporting peripheral applications in the food and metal industries, in mining and energy generation. Heating, cooling, air-conditioning

from page 57

Pumps, pump systems and accessories for heating and cooling applications and airconditioning. Water supply

from page 60

Pumps, pump systems and accessories for > Water supply and pressure boosting > Fire-extinguishing water supply > Clean water treatment > Raw water intake > Desalination Drainage and sewage

from page 64

Pumps, pump systems and accessories for > Wastewater collection and transport > Sewage treatment > Dewatering

Industry Field of application Industry processes

Field of application Industry processes

Product category

Glanded monobloc pumps

Glanded norm pumps

Norm pumps according to EN733

Series Wilo CronoBloc BL

Series Wilo-CronoNorm NL Wilo-VeroNorm-NPG

Series Series NOLH Series NOEH

Norm pumps according to EN733 and EN22858 Series Series NESD Series NESE

Design Glanded pump in monobloc design with flange connection

Design Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate.

Design Single-stage centrifugal pump mounted on a baseplate

Application For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems.

Application For supplying clean or lightly contaminated fluids without solid material. For use in the following applications: • Industrial processes • Non-hygienic food industry • Power generation • Water circulation in the metal industry • Heating, cold water and coolant plants

Application For heat transfer or circulating hot water in industrial processes, for power generation or in building services.

Q max. 360 m³/h

Q max. 3,000 m³/h

Q max. 1800 m³/h

Q max. 600 m³/h

H max. 105 m

H max. 140 m

H max. 90 m

Technical data • Permissible temperature range -20 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Nominal diameter on pressure side DN 32 to DN 125 • Max. operating pressure PN16

Technical data • Max. permissible fluid temperature NESD: 207 °C NESE: 0 °C ... 120 °C (40 bar) 120 °C … 200 °C (35 bar) 200 °C ... 230 °C (32 bar) • Minimum fluid temperature: 170 °C • Nominal diameter on pressure side DN 32 to DN 125 • Max. operating pressure NESD: PN25; NESE: PN25

Equipment/function • Single-stage, horizontal centrifugal pump with axial suction connection and radial pressure upwards-facing pressure connection • Dimensions and hydraulic output as per EN733 • Hydraulics from cast iron (ML) or stainless steel (MX) depending on version. • Sealed by uncooled mechanical seal • Version with or without spacer coupling • 2 or 4-pole IEC standard rotor • Baseplate made from steel or cast iron • Delivered as complete unit (pump, coupling, coupling protection, motor and baseplate) or without motor or only pump with free shaft end

Equipment/function • Single-stage, horizontal centrifugal pump with axial suction connection and radial pressure upwards-facing pressure connection • Dimensions and hydraulic output as per EN 22858 • Special self-cooling design allows for use of an uncooled shaft seal. Additional or external cooling device not required. • Hydraulics in spheroidal cast iron EN‑GS400 (MG version) • flange version in accordance with EN 1092-1 • Version with or without spacer coupling • 2 or 4-pole IEC standard motor 50 Hz • Baseplate made from steel or cast iron • Delivered as complete unit (pump, coupling, coupling protection, motor and baseplate) or without motor or only pump with free shaft end

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power motors with IE2 technology • Meets user requirements due to performance and main dimensions in accordance with EN 733 • Long motor life due to standard condensate drainage holes in the motor housing • Corrosion protection due to cataphoretic coating

Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power motors with IE2 technology • Other materials and versions on request

Special features • Impeller diameter is adjusted to the dutypoint as appropriate • Many model options for shaft seal • 60 Hz or ATEX version on request

Special features • Impeller diameter is adjusted to the dutypoint as appropriate • 60 Hz or ATEX version on request

Information Online catalogue www.wilo.com

Information Documentation on request

Materials • Pump housing standard: EN-GJL-250 Optional: EN-GJS-400-18 • Impeller (standard): EN‑GJL‑200 Special version: Bronze G-CuSn10 • Shaft: 1.4122 • Mechanical seal: AQEGG other mechanical seals on request

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Industry processes

Field of application Industry processes

Product category

Line-shaft pump Series Series Norma V

Line-shaft pump Series Series MMI 50 V

Norm pumps according to EN733 Series Series NFCH

Design Single-stage low-pressure centrifugal pump mounted on a baseplate

Design Single-stage line-shaft pump with pump hydraulics as per EN733

Design Multistage line-shaft pump

Application For pumping mineral or synthetic heat carrying fluids up to 350 °C, e.g.: in industrial processes or for power generation

Application For pumping clean or lightly contaminated fluids in industrial processes and in sewage treatment as well as for transporting light-duty mineral oil products. For installation in tanks, vessels, rainwater storage tanks and sumps

Application For pumping clean or slightly contaminated water within industrial processes or water purification. Ideal in situations where no installation space is available. • For installation in tanks, vessels, rainwater storage tanks and sumps

Q max. 1000 m³/h

Q max. 200 m³/h

Q max. 30 m³/h

H max. 90 m

H max. 100 m

H max. 180 m

Technical data • Permissible temperature range up to +350 °C, dependent on max. operating pressure: 0 °C ... 120 °C (16 bar) 120 °C … 300 °C (13 bar) 300 °C ... 350 °C (16 bar) • Nominal diameter on pressure side DN 32 to DN 125 • Max. operating pressure PN16

Technical data • Permissible temperature range up to +120 °C • Nominal diameter on pressure side DN 32 to DN 100 • Max. operating pressure PN16 • Mains connection 3~400 V, 50 Hz • Max. viscosity 150 cSt

Technical data • Permissible temperature range -20 °C to +120 °C • Nominal diameter on pressure side DN 32 to DN 100 • Max. operating pressure PN10 or PN16 • Mains connection 3~400 V, 50 Hz • Max. viscosity 150 cSt

Equipment/function • Single-stage, horizontal centrifugal pump with axial suction connection and radial pressure upwards-facing pressure connection • Dimensions and hydraulic output as per EN 733 • Self-cooling design with double temperature barrier allows the use of an uncooled shaft seal, reducing heat loss. • Standard mechanical seal corresponding to heat carrier medium • Version with or without spacer coupling • 2 or 4-pole IEC standard motor 50 Hz • Delivered as complete unit (pump, coupling, coupling protection, motor and baseplate) or without motor or only pump with free shaft end

Equipment/function • Single-stage pipe housing pump, pressure chamber • Axial suction • Connection on pressure side above or optionally also below the connection plate • Flange version in PN 10/16/25 • Ground versions: VCS : adjustable base and fixed coupling VEM : Cast iron support and fixed coupling VTM : Bearing block and semi-elastic coupling

Equipment/function VCS : adjustable base and fixed coupling: VEM : Cast iron support and fixed coupling VTM : Bearing block and semi-elastic coupling VTMRI : Bearing block and semi-elastic coupling with internal flow (shaft seal) for small installation spaces VRI : Cast iron support, fixed coupling and internal flow (shaft seal) for small installation spaces

Special features Impeller diameter is adjusted to the dutypoint as appropriate • 60 Hz or ATEX version on request

Special features • Low maintenance • No shaft sealing • Noise-free suction • Replaceable IEC standard motor • Semi-elastic coupling with the VTM version

Special features • Low maintenance • No mechanical shaft seal • Noise-free suction • Replaceable IEC standard motor • Semi-elastic coupling with the VTM version • Internal seal for pressure side and mechanical shaft seal in versions VTMRI and VRI • All parts in contact with fluid are made of stainless steel • for high pressure applications

Information Documentation on request

• IEC motor B14/V1, 1450 or 2900 1/min (60 Hz on request) • Optional: explosion-proof float switch; • Optional: external lubrication of bearing or lubrication provided by fluid (default)

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Industry processes

Field of application Industry processes, water supply

Product category

Ring-section pumps Series Series RN, HS, IPB, PJ, STD PLURO, FG/FH

Axially split case pumps Series Wilo-SCP

Vertical turbine pumps Series Series VMF, CNE, VAF

Design Multistage high-pressure multistage centrifugal pump in sectional construction mounted on a baseplate

Design Low-pressure centrifugal pump with axially split housing mounted on a baseplate

Design Dry installed vertical turbine pumps with immersed axial or semi-axial hydraulics

Application For industrial use in high-pressure applications, such as: • Metal industry • Mine drainage • Desalination plants • Boiler supply • Fire extinguisher supply • High-pressure cleaning • Water supply

Application For industrial or municipal water supply and • Irrigation • Fire-extinguishing water supply • Cooling water supply • Drainage and high water protection

Q max. 1000 m³/h

Q max. 3,400 m³/h

Q max. 40.000 m³/h

H max. 1800 m

H max. 245 m

H max. 450 m

Technical data • Perm. temperature range up to +80 °C or +160 °C on request • Max. operating pressure 180 bar • Nominal diameter on pressure side DN 32 to DN 250

Technical data • Perm. temperature range 80 °C to 105 °C • Nominal diameter DN 100 to DN 2000

Equipment/function • High-pressure multistage centrifugal pump in sectional construction • 2 to 15-stage industrial version • screwed segments • hydraulic axial compensation • Shaft seal with mechanical seal or stuffing box • Optional with several pressure outlets for e.g.: Fire extinguishing applications • 2- or 4-pole 50 Hz motors, 60 Hz on request • Delivered as complete unit (pump, coupling, motor on baseplate) or without motor or only pump with free shaft end

Special features • Modular design ensures pump model with variety of materials and versions which can be adapted to meet customer demands precisely • Hydraulic pressure compensation relieves load on bearings and ensures a longer lifetime. • Several optional pressure connections allow you different pressures to be supplied from a single pump.

Special features • Higher capacities up to 17,000 m³/h on request • Special motors and other materials on request

Special features • Minimum surface area needed • High hydraulic efficiency • immersed pump hydraulics • Design to order as per customer specifications

Information Documentation on request

Information Online catalogue www.wilo.com

Information Documentation on request

Materials: • Pump housing: EN-GJL-250 • Impeller: G-CuSn 10 • Shaft: X12Cr13

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Heating, air-conditioning, cooling, Industrial circulation systems

Field of application Heating, air-conditioning, cooling, Industrial circulation systems

! tension Series ex

Product category Glanded high-efficiency pumps in in-line design Series Wilo-Statos GIGA

Product category Glanded energy-saving pumps in in-line design Series Wilo-VeroLine-IP-E Wilo-VeroTwin-DP-E

Product category Glanded energy-saving pumps in in-line design Series Wilo-CronoLine-IL-E Wilo-CronoTwin-DL-E

Product category Glanded standard pumps in in-line design Series Wilo-VeroLine-IPL Wilo-VeroTwin-DPL

Design Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment

Design Glanded pump in in-line design with threaded connection or flange connection

Application Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.

Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems

Q max. 35 m³/h

Q max. 170 m³/h

Q max. 680 m³/h

Q max. 240 m³/h

H max. 52 m

H max. 30 m

H max. 65 m

H max. 52 m

Technical data • Perm. temperature range -20 °C to +120 °C • Mains connection 3~400 V, 50 Hz • Protection class IP 55 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure 10 bar (special version: 16 bar)

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Coupling • EC motor with electronic power adjustment Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPS-GF40 • Shaft: 1.4122 • Mechanical seal: AQ1EGG Other mechanical seals:on request

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Engine with integrated electronic power adjustment • DP-E with switchover valve

Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: PPO-GF30 • Shaft: 1.4021 • Mechanical seal: AQEGG Other mechanical seals: on request

Materials: • Pump housing and lantern: EN-GJL-250 • Impeller: Standard version: EN-GJL200 special version: G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Heating, air-conditioning, cooling, Industrial circulation systems

Field of application Heating, air-conditioning, cooling, Industrial circulation systems

Product category

Glanded standard pumps in in-line design Series Wilo-CronoLine-IL Wilo-CronoTwin-DL

Special glanded pumps in in-line design Series Wilo-VeroLine-IPH-W Wilo-VeroLine-IPH-O

Special glanded pumps in in-line design Series Wilo-VeroLine-IPS

Glanded monobloc pumps Series Wilo-BAC

Design Glanded pump in in-line design with flange connection

Design Glanded pump in in-line design with threaded connection or flange connection

Design Glanded pump in monobloc design with threaded connection or Victaulic connection

Application For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems

Application For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems.

Application For pumping water-glycol mixtures with 20 to 40 %

Q max. 1.150 m³/h

Q max. 80 m³/h

Q max. 13 m³/h

Q max. 80 m³/h

H max. 110 m

H max. 38 m

H max. 3 m

H max. 25 m

Equipment/function Single-stage, low-pressure centrifugal pump in in-line design with • Mechanical seal • Flange connection • Lantern • Motor with special shaft

Equipment/function Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port

Materials: • Pump housing and lantern: EN-GJL-200 • Impeller: Plastic • Shaft: 1.4021 • Mechanical seal: BVEGG Other mechanical seals on request

Materials • Pump housing: PA 6.6 50 % GF • Impeller: PA/PPO, fibreglass-reinforced • Shaft: X30Cr13 • Mechanical seal: BQEGG

Special features • Worldwide availability of the standard motors used

Information Online catalogue www.wilo.com

Materials: • Pump housing and lantern: Standard version: EN-GJL-250 Optional: Spheroidal cast iron EN-GJS400-18-LT • Impeller: Standard: EN-GJL200 Special version: Red brass G-CuSn 10 • Shaft: 1.4122 • Mechanical seal: AQEGG Other mechanical seals: on request Special features • High-efficiency motors as standard; from 0.75 kW nominal motor power: motors with IE2 technology • Reduced life cycle costs due to optimised efficiency • Standard condensate drainage holes in the motor housings • Can be used flexibly in air-conditioning and cooling systems, with application benefits due direct draining of condensate via optimised lantern design (patented) • Bidirectional mechanical seal with forced flushing • High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals • Easy to install due to feet with threaded holes on pump housing Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Heating, air-conditioning, cooling, Industrial circulation systems

Field of application Heating, air-conditioning, cooling, Industrial circulation systems

APPLIES TO EUROPEAN DIRECTIVE FOR ENERGY RELATED PRODUCTS

Product category Glandless high-efficiency pumps Series Wilo-Stratos Wilo-Stratos-D

Product category Glandless standard pumps Series Wilo-TOP-S Wilo-TOP-SD

Design Glandless circulation pump with threaded connection or flange connection, EC motor and automatic power adjustment.

Design Glandless circulation pump with threaded connection or flange connection.

Application Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems

Application Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems

Q max. 61 m³/h

Q max. 75 m³/h

H max. 13 m

H max. 19 m

Technical data • Perm. temperature range -20 °C to +130 °C In short-term operation (2 h) up to +140 °C • For use with Wilo-Protect-Module-C: -20 °C to +110 °C • Mains connection: --1~230 V, 50 Hz (depending on type) --3~400 V, 50 Hz --3~230 V, 50 Hz (with optional switching plug) • Protection class IP 44 • Nominal diameter Rp 1 to DN 100 • Max. operating pressure screw-end pumps 10 bar flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar)

Special features • Energy efficiency class A • Up to 80 % electricity savings over circulation pumps without speed control • Highest degrees of efficiency due to ECM technology For other standard circulation pump, see also pages 10 and 17

Special features • Pump communication in simple and safe retrofit plug-in technology • Easy installation due to combination flanges up to nominal diameter DN 65 For other standard circulation pump, see also pages 11 and 17

Information Online catalogue www.wilo.com Building Services catalogue, Heating, Air-Conditioning, Cooling

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Water supply

Field of application Water supply

Field of application Water supply, fire water supply

tension Series ex

Product category Submersible pumps Series Wilo-Sub TWI 4 … Wilo-Sub TWI 6 … Wilo-Sub TWI 8 … Wilo-Sub TWI 10 …

Product category

tension Series ex

Product category

Submersible pumps Series Wilo-EMU 6" series Wilo-EMU 8" series Wilo-EMU 10"…24“ series

Submersible pumps Series Wilo-EMU bottom intake pumps

Product category Sprinkler pumps with VdS approval Series Wilo-EMU sprinkler pumps

Design Submersible pump, multistage

Design Submersible pump with sectional construction

Design Submersible bottom intake pump

Design Sprinkler pump in sectional design

Application Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; utilisation of geothermal energy and offshore applications; supplying fountains, snow cannons and water organs

Application For supplying sprinkler systems

Q max. 165 m³/h

Q max. 2400 m³/h

Q max. 1.200 m³/h

Q max. 580 m³/h

H max. 500 m

H max. 560 m

H max. 160 m

H max. 140 m

Technical data • Mains connection: 1~230 V, 50 Hz (only TWI 4 …) or 3~400 V, 50 Hz • Immersed operating mode: S1 • Fluid temperature: 3-20 °C or 3-30 °C • Min. flow at motor: 0.08-0.5 m/s • Max. sand content: 50 g/m³ • Up to 10 20 starts per hour • Max. immersion depth: 100-350 m • Protection class: IP 68

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Water supply

tension Series ex

Product category Vertical, multistage centrifugal pumps Series Wilo-Helix-V

Field of application Water supply

tion odifica Series m

tension Series ex

Product category Vertical, multistage centrifugal pumps Series Wilo-Helix-VE

Product category Vertical, multistage centrifugal pumps Series Wilo-Multivert MVI

tension Series ex

Product category Vertical, multistage centrifugal pumps Series Wilo-Multivert-MVIE

Design Non-self-priming multistage pump

Design Non-self-priming multistage pump with integrated frequency converter

Design Non-self-priming multistage pump

Design Non-self-priming multistage pump with integrated frequency converter

Application • Water supply and pressure boosting • Industrial circulation systems • Process water • Cooling water circulation systems • Washing systems • Irrigation

Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems

Q max. 80 m³/h

Q max. 45 m³/h

Q max. 155 m³/h

Q max. 145 m³/h

H max. 250 m

H max. 234 m

H max. 240 m

H max. 245 m

Technical data • Fluid temperature -30 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges

Technical data • Fluid temperature -20 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55 • PN 16 and PN 25 with loose round flanges

Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16/25 bar • Inlet pressure max. 10 bar • Protection class IP 55

Technical data • Fluid temperature -15 to +120 °C • Operating pressure max. 16 bar/25 bar • Inlet pressure max. 6 bar • Protection class IP 54 or IP 55

Equipment/function • Impellers, stage chambers and pump housing stainless steel 1.4301/1.4404 (AISI304L/AISI316L) • Versions with 1.44xx stainless steel designed for aggressive fluids • Versions --PN16 with oval flanges and PN25 with round DIN flanges --Helix V22, 32, 52 PN16 and PN25 with round loose flanges as per ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor

Equipment/function • Impellers, stage chambers and pump housing stainless steel 1.4301/1.4404 (AISI304L/AISI316L) • Versions with 1.44xx stainless steel designed for aggressive fluids • PN16 and PN25 version with round loose flanges as per ISO 2531 and ISO 7005 • IE2/IEC standard three-phase AC motor • Integrated frequency converter

Special features • MVI 100 … 1600-6 All parts that come in contact with the fluid made of stainless steel 1.4301 (AISI 304) or 14404 (AISI 316L) • MVI 1600 … MVI 9500 depending on pump type in stainless steel 1.4404 (AISI 316L) or 1.4301 (AISI 304) with pump housing made of grey cast iron • EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Water supply

Field of application Water supply

Product category

Horizontal, multistage centrifugal pumps Series Wilo-Economy MHIL

Vertical, multistage centrifugal pumps Series Wilo-Multivert MVIL

Horizontal, multistage centrifugal pumps Series Wilo-Economy MHI

Horizontal, multistage centrifugal pumps Series Wilo-Economy MHIE

Design Non-self-priming multistage pump

Design Non-self-priming multistage pump with integrated frequency converter

Application • Water supply and pressure boosting • Commerce and industry • Washing and spraying systems • Rainwater utilisation • Cooling and cold water circulation systems

Application • Water supply and pressure boosting • Commerce and industry • Cooling water circulation systems • Washing and sprinkling systems

Application • Water supply and pressure boosting • Industrial circulation systems • Process engineering • Cooling water circulation systems • Washing and sprinkling systems

Q max. 13 m³/h

Q max. 25 m³/h

Q max. 30 m³/h

H max. 68 m

H max. 135 m

H max. 70 m

H max. 84 m

Technical data • Fluid temperature -15 to +90 °C • Operating pressure max. 10 bar • Inlet pressure max. 6 bar • Protection class IP 54

Technical data • Fluid temperature -15 to +90 °C • Operating pressure max. 10 bar • Max. inlet pressure 6 bar • Protection class IP 54

Technical data • Fluid temperature -15 to +110 °C • Operating pressure max. 10 bar • Inlet pressure max. 6 bar • Protection class IP 54

Equipment/function • Pump in monobloc design • Threaded connection • Single-phase or three-phase AC motor • Single-phase AC motor with integrated thermal motor protection

Equipment/function • Pump in in-line design • Oval flange • Single-phase or three-phase AC motor • Single-phase AC motor with integrated thermal motor protection

Equipment/function • Stainless steel pump in monobloc design • Threaded connection • Single-phase or three-phase AC motor • Single-phase AC motor with integrated thermal motor protection

Special features • Impellers and stage chambers made of stainless steel 1.4301 (AISI 304) • Pump housing made of grey cast iron EN-GJL-250, cataphoretic coating • All relevant components have KTW and WRAS approval

Information Online catalogue www.wilo.com

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Water supply

Product category Single-pump pressure boosting system with system separation Series Wilo-Economy CO/T-1 MVI … /ER

Field of application Water supply

Product category Single-pump pressure boosting systems Series Wilo-Economy CO-1 MVIS … /ER Wilo-Economy CO-1 MVI … /ER Wilo-Economy CO-1 Helix-V … /CE

Field of application Water supply

Product category

: tension Series ex VIE 32../52.. M COR-1 elix VE -GE H -1 COR

Single-pump pressure boosting systems with speed-controlled pump Series Wilo-Comfort-N-Vario COR-1 MVISE … Wilo-Comfort-Vario COR-1 MVIE … Wilo-Comfort-Vario COR-1 Helix-VE …

Field of application Water supply

tion odifica Series m

Product category Multi-pump pressure boosting systems Series Wilo-Economy CO 2-4 MHI … /ER Wilo-Comfort-N-CO 2-6 MVIS … /CC Wilo-Comfort-CO 2-6 MVI … /CC Wilo-Comfort-CO 2-6 Helix-V … /CC

Design Water supply systems with system separation and a non-self-priming, highpressure multistage centrifugal pump

Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump

Design Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump with integrated speed control

Design Pressure boosting system with 2 to 6 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel

Q max. 8 m³/h

Q max. 135 m³/h

Q max. 97 m³/h

Q max. 800 m³/h

H max. 110 m

H max. 160 m

H max. 150 m

H max. 160 m

Technical data • Mains connection 3~400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 44

Technical data • Mains connection 3~230 V / 400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 10 bar or 16 bar • Inlet pressure 6 bar • Protection class IP 54

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

Industry Field of application Water supply

Field of application Water supply

Multi-pump pressure boosting systems with speed control Series Wilo-Comfort-N-COR 2-6 MVIS … /CC Wilo-Comfort-COR 2-6 MVI … /CC Wilo-Comfort-COR2-6 Helix-V … /CC

Field of application Drainage and sewage

Product category

: tension Series ex MVIE 32../52.. 4 2 R CO VE /VR 4 Helix COR2-

tion odifica Series m

Product category

Field of application Water supply, fire water supply

Product category Multi-pump pressure boosting systems with speed controlled pumps Series Wilo-Comfort-Vario-COR 2-4 MHIE … /VR Wilo-Comfort-N-Vario-COR 2-4 MVISE … /VR Wilo-Comfort-Vario-COR 2-4 MVIE … /VR Wilo-Comfort-Vario COR2 -4 Helix-VE …

Multi-pump pressure boosting systems Series Wilo-FLA

Submersible drainage pumps Series Wilo-Drain TMT Wilo-Drain TMC

Design Pressure boosting system with speed control and 2 to 6 non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel

Design Pressure boosting system with 2 to 4 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel, with integrated speed control

Design Pressure boosting system for fire extinguisher applications with 1 to 2 autonomous working, non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel

Design Submersible drainage pumps

Application For supply of fire extinguisher water from fire hose reels according to DIN 14462 from 04/2009

Application For industrial applications, e.g. for condensate, hot water and aggressive fluids.

Q max. 800 m³/h

Q max. 560 m³/h

Q max. 80 m³/h

Q max. 22 m³/h

H max. 160 m

H max. 150 m

H max. 130 m

H max. 13 m

Technical data • Mains connection 3~230 / 400 V, 50 Hz • Fluid temperature max. 50 °C • Operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 54

Technical data • Mains connection 3~230/400 V, 50 Hz • Fluid temperature max. 50 °C • Max. operating pressure 16 bar • Inlet pressure 6 bar • Protection class IP 54

Equipment/function • Pump housing and impeller made of grey cast iron, bronze or stainless steel, depending on version

Special features • High temperature resistance • Also suitable for aggressive fluids

Information Documentation on request

Information Online catalogue www.wilo.com

Information Online catalogue www.wilo.com Building Services catalogue, Water Supply

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Drainage and sewage

Field of application Drainage and sewage

xtensio Series e

Product category Submersible sewage pumps Series Wilo-Drain TP 80 Wilo-Drain TP 100 Wilo-Drain TP...-AM

Field of application Drainage and sewage

tion

Product category Submersible sewage pumps Series Wilo-EMU FA 05 … to FA 15 …

xtensio Series e

odifica

Series m

Field of application Drainage and sewage

Product category Wilo-EMU Uniprop without gear Series TR 22 to TR 40

xtensio Series e

Product category Wilo-EMU Maxi-/Megaprop with gear Series TR 216 to TR 226 TR 316 to TR 326 TRE 221/TRE 321 with IE3 motor

Design Submersible sewage pump for industrial applications

Design Submersible sewage pumps

Design Compact directly driven submersible mixer

Design Slow-running submersible mixer with two-stage planetary gear

Application For pumping heavily contaminated fluids, for environmental and water treatment technology and industrial and process engineering

Application Swirling of deposits and solids in rain spillway basin and pump sump; destruction of floating sludge layers; other areas of application in agriculture and water supply

Application Energy-optimised mixing and circulation of activated sludge; generation of flow rates in circulation channels; further areas of application in industry

Q max. 180 m³/h

Q max. 103 m³/h

Q max. Thrust: 185 - 1100 N

Q max. Thrust: 470 - 4340 N

H max. 21 m

H max. 51 m

Technical data • Mains connection: 3~400 V, 50 Hz • Immersed operating mode: S1 or S3 25% • Surfaced operating mode: S1 or S3 25% • Protection class: IP 68 • Insulation class: F • Thermal winding monitoring • Sealing chamber control • Max. fluid temperature: 40 °C • Free ball passage: 80 or 100 mm • Max. immersion depth: 20 m

Equipment/function • Heavy-duty version made of cast iron • Simple installation via suspension unit or pump base

Equipment/function • Installation with stand allows free placement in basin • Flexible installation • Two-stage planetary gear with exchangeable second planetary stage

Special features • Submersible • Self-cleaning propeller with helix hub • Easy-to-install propeller attachment • Propeller in steel or PUR version • ATEX and FM versions

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Submersible drainage pumps Series Wilo-EMU KS

Self-priming drainage pumps Series Wilo-Drain LP Wilo-Drain LPC

Self-priming drainage pumps Series Series Type S

Pedestal pumps Series Wilo-Drain VC

Design Submersible drainage pumps in rugged design for use on building sites

Design Dry-mounted and self-priming drainage pumps

Design Vertical drainage pumps

Application For drainage of excavation pits, cellar areas, pits and basins. Ideally suited for applications in fountains

Application For stationary or mobile pumping of clean or sludgy fluids in the following applications: • chemical industry • Food industry • Wastewater • Sludgy or sandy water • Seawater or brackish water

Application For pumping wastewater/fluids up to 95 °C • From pump sumps • With condensate • From basements at risk of flooding

Q max. 340 m³/h

Q max. 71 m³/h

Q max. 630 m³/h

Q max. 17 m³/h

H max. 71 m

H max. 29 m

H max. 50 m

H max. 20 m

Technical data • Operating mode S1 • Max. fluid temperature 40 °C • Protection class IP 68 • Sealed by double mechanical seal • Maintenance-free roller bearing

Technical data • Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz • Fluid temperature 3 °C to 35 °C • Free ball passage, depending on type 5 to 12 mm • Connection Rp 1½ to G3

Technical data • Permissible temperature range +5°C to +70/+150 °C • Free ball passage 20 to 72 mm, depending on type • IEC electro, petrol or diesel motor • Nominal diameter on pressure side DN 1 1/2840 to DN 200 • Max. operating pressure PN16

Equipment/function • Portable self-priming centrifugal pump

Equipment/function • Single-stage self-priming circulation pump with open impeller • Single-stage self-priming circulation pump with open impeller • For mobile use with support frame or installed on handcart • With IEC motor or optionally with diesel/ petrol engine • Optional cutting device • Optional external lubrication of mechanical shaft seal

Equipment/function • Attached float switch • Capacitor box (VC 32, 1~)

Special features • High operational reliability • Easy handling • Easy operation

Special features • Quick self-priming up to 7.5 m • Free ball passage 75 mm • Highly resistant to abrasion thanks to use of easy-to-replace wear plates • Highly resistant to abrasion thanks to use of easy-to-replace wear plates • Available in cast iron or bronze/stainless steel • Version for sea water applications contain zinc anodes in the pump housing • Optional cutting device • Optional 60 Hz /ATEX versions

Special features • Long service life • Easy commissioning • Connection outside the fluid • Long downtimes possible • Integrated motor protection due to thermal relay and control electrode

Information Online catalogue www.wilo.com

Information Documentation on request

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

Industry Field of application Drainage and sewage

Field of application Drainage and sewage

Product category

Sewage lifting unit with 1 or 2 integrated pumps Series Wilo-DrainLift M Wilo-DrainLift L Wilo-DrainLift XL Wilo-DrainLift XXL

Pumps station with synthetic tank Series Wilo-DrainLift WS 40 Basic Wilo-DrainLift WS 40-50

Pumps station with synthetic tank Series Wilo-DrainLift WS 625

Pumps station with synthetic tank Series Wilo DrainLift WS 830 Wilo-DrainLift WS 900 Wilo-DrainLift WS 1100

Design Sewage lifting unit with 1 or 2 integrated pumps

Design Pumps station with synthetic tank or as sewage lifting unit in the building

Design Pumps station with synthetic tank

Design Pumps station with synthetic tanks, as single or twin pump system

Application For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall

Max. intake/h with S3 operation 1.050...55.200L

Q max. 60 m³/h

Q max. 15 m³/h

Q max. 180 m³/h

H max. 27 m

H max. 55 m

Technical data • Mains connection 3~400 V, 50 Hz • Operating mode: S1; S3 • Fluid temperature max. 40 °C, for short periods 60 °C • Protection class IP 67 • Tank volume 62 to 800 l, depending on type • Switching volume 24 to 630 l, depending on type

Equipment/function • Thermal motor monitoring • Level control with level sensor • Potential-free contact • Pump cable detachable • Inlet seal • Non-return valve

Equipment/function Wilo-Drain pumps that can be used: TC 40 TP 50 TP 65 MTS 40/21 … 27

Equipment/function Wilo-Drain pumps that can be used: TMW 32 TC 40 STS 40 MTS 40/21 … 27

Equipment/function Wilo-Drain pumps that can be used: TS 40 TP 50 TP 65 STS 65 TP 80 MTC 32 MTC 40 MTS 40

Special features • For DrainLift M, L and XL easy assembly/ commissioning thanks to --Built-in non-return valve --Higher flexibility in the intake area (connection is height-adjustable and can be swivelled) • Safe due to: --Large switching volume --Additional potential-free contact --Reliable level measurement due to level sensor --DrainLift XL and XXL suitable for endurance runs (though integrated sheath current cooling) For other dirt and sewage lifting units, see also pages 31 and 32

Information Online catalogue www.wilo.com

General Overview International 2011 – 50 Hz – Subject to change without prior notice.

2117723/2T/1103/INT/FRO

WILO SE · Nortkirchenstraße 100 · 44263 Dortmund · Germany · T 0231 4102-0 · F 0231 4102-7363 · wilo@wilo.de · www.wilo.com