Half Cut Solar Panels Murickens Group is the leading Manufacturer and supplier of solar products under the trademarks MG and Flyline. Half cut solar cells are silicon solar cells that are cut in half with a laser cutter. So the maximum number of cells accommodate in a limited space. Half cut solar cells are high wattage solar cells .This type of solar cells manufactured using Robotic technology. The efficiency of half-cut solar cells is very high compared to local solar cells. It is a very durable type of solar cell. Half-cut solar cells are manufactured using highly efficient robotic technology. Another important specialty of the half-cut solar panel is it works fine even if one side is shaded. Murickens Group uses top-tier solar panels for the entire production. Trina Solar Panels, JA Solar Panels, Canadian Solar Panels, Jinko Solar Panels, REC Solar panels, etc. are our main solar panels.
Half-Cut Solar Panel
Full-Cut Solar Panel
A half-cut solar panel with 600 W power requires only 2.2 meters of length and 1 meters of width. We can use the full cut of two panels (300 W x 2 = 600 W panel) instead of the 600 W half cut. Each individual unit has 300 W of power, which requires a space of 1.6 meters in length and 1 meters in width for each panel. This requires space near to double compared to the 600 W half- cut single panel.
Half-cut solar cells are most beneficial to manufacturers. It lowers manufacturing costs, risk factors, and so on. On the customer side, there is only one benefit, i.e., it saves a small amount of installation space. Half-cut cells are more physically durable than traditional solar panels. They are more resistant to cracking because they are smaller in size. Murickens Group is an international-quality solar product manufacturer and distributor in all of Kerala and outside Kerala.
Advantages of Half Cut Solar cells 1 High Efficiency 2 Durability 3 Higher Shade tolerance - One portion is active even if the other half is shaded. 4 This reduces manpower, maintenance, and fabrication costs.
5 Half-cut solar cells are more useful to the manufacturers. It reduces manufacturing cost, risk factors etc