cutting
Circular shears with manual drive type KSH 1 and KSH 3 The manually operated circular shears distinguish themselves by their easy operability. Interior and exterior contours are cut cleanly. It is Driving powern by a handcrank on the top shaft. The round blank diameter is set according to the dimension scale. The blade is advanced by means of a handwheel and spindle. The cut gap can be adjusted quickly and easily by means of a setting ring with scale. The blade shafts are held in place by maintenance-free bearings.
KSH 1
Technical data Type
KSH 1
KSH 3
Sheet thickness
mm
1,5
1,5
Round blank diameter
mm
70 -1000
70 - 1500
Blade overhang
mm
350
350
Net weight approx.
kg
128
150
Special accessories • Special blades for VA-sheets • Transport device for safe transport with forklift or lifting truck.
Subject to constructional changes
Circular shears with motor drive type KSM 1 and KSM 3 The Driving power, controlled via foot jogging switch, is a transmission brake motor with 2 working speeds. Interior and exterior contours are cut cleanly. The round blank diameter is set according to the dimension scale. The blade is advanced by means of a handwheel and spindle. The cut gap can be adjusted quickly and easily by means of a setting ring with scale. The blade shafts are held in place by maintenance-free bearings.
Technical data
Standard accessories
Type
KSM 1
KSM 3
Sheet thickness
mm
1,5
1,5
Round blank diameter
mm
70 - 1000
70 - 1500
Blade overhang
mm
350
350
Working speed
m/min
7 /14
7 / 14
Driving power
kw
0,3/0,45
0,3 / 0,45
x
x
155
178
Connection voltage 3x400V / 50Hz Net weight approx.
KSM 3
kg
• Base • Foot switch
Special accessories • Special blades for VA-sheets • Transport device for safe transport with forklift or lifting truck.
Subject to constructional changes
16
© Schwartmanns Isoliermaschinen