WASTE WATER SYSTEMS RIGID TANKS FOR WASTE WATER The high-grade linear polythene materials used are the same as all other rigid VETUS tanks and they are available with capacities of 40, 60 or 80 litres. The centre point for an SAE flange gauge sender is incorporated in the moulding together with 5 blind bolt holes. The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. These tanks will save considerable installation time!
Each tank is supplied with the following connections: Fixed hose connector ø 19 mm for the breather line. Rotating hose connector ø 38 mm with pick-up pipe, for waste water suction. A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. These tanks come complete with a screw down inspection lid installed. Provided with ISO 8099 identification.
BTANK40C BTANK60C
BTANK25C
Plastic waste water tank 25 l.
incl. connections and insp. lid (excl. inlet fitting)
BTANK40C
Plastic waste water tank 40 l.
incl. connections and insp. lid (excl. inlet fitting)
BTANK80C
BTANK60C
Plastic waste water tank 60 l.
incl. connections and insp. lid (excl. inlet fitting)
BTANK80C
Plastic waste water tank 80 l.
incl. connections and insp. lid (excl. inlet fitting)
dimensions: plus or minus 2%
BULKHEAD MOUNTED WASTE WATER TANKS These tanks are available in 3 sizes, with capacities of approximately 25, 60 or 80 litres. The tanks are made of odour impermeable polythene and the contents level can be seen from outside. They come complete with the following components installed: - Suction pipe with ø 38 mm angled hose connector, for connection to deck plate - Angled hose connector, ø 38 mm, for discharge - Inspection cover - Angled hose connector, ø 19 mm, for tank ventilation (breather) Angled inlet connectors can be ordered separately; see pricelist. One hole has already been provided, to connect the inlet fitting. These tanks are suitable for mounting under the side decks, above the waterline. When permitted, the contents of the tank can be gravity discharged at sea, without the assistance of a pump. Simply opening the sea cock will empty the tank. Provided with ISO 8099 identification.
WW25W WW60W
WW25WH
Bulkhead mounted waste water tank 25 ltrs
complete
WW80W
WW25W
Bulkhead mounted waste water tank 25 ltrs
complete
WW60W
Bulkhead mounted waste water tank 60 ltrs
complete
WW80W
Bulkhead mounted waste water tank 80 ltrs
complete
dimensions: plus or minus 2%
111
110111_11_ROW.indd 3
12/16/2010 11:26:39 PM