pp141-161_Oiling System:2010
9/30/09
5:05 PM
Page 151
OIL PRODUCT FILTER ADAPTERS HEADER
OIL BYPASS ELIMINATOR, CHEVY • • • • •
Designed to eliminate the oil bypass found on Chevrolet engines Does not allow unfiltered oil back into the engine A stock type spin-on oil filter can be used with this part installed Machined from billet aluminum for strength Features a single inlet and easy two bolt installation
PART # 23775
DESCRIPTION Oil Bypass Eliminator, SBC, BBC (except Gen V and Gen VI)
No. 23775
OIL FILTER ADAPTERS Fits: Small Block and Big Block (Mark IV) Chevys
PART # 23690 23692 PART # 23708 23706
DESCRIPTION Oil Filter Adapter, Chevy, for plumbing Accumulators and External or Dry Sump Oil Pumps Oil Filter Adapter, Chevy, for plumbing Remote Oil Coolers AVAILABLE OPTIONS 1/2" NPT to -12AN Fittings 1/2" NPT to -12AN Fittings NOTE: For Replacement O-Rings, call Moroso Technical Service.
No. 23690
Racing Oil Filters on pg. 148
OIL FILTER ADAPTER, 4.6/5.4 FORD • Anodized adapter replaces larger factory casting • Provides for easy plumbing of remote oil filters and coolers • Enables the plumbing of external, wet or dry sump oil pumps when lower port is plugged • -16AN fitting supplied for water outlet to radiator • Includes 2 -10AN to -12AN Fittings for oil line plumbing and 1-10AN Plug PART # 23681
No. 23681
OILING SYSTEM EQUIPMENT
• No. 23690 designed to plumb Moroso Accumulators and External or Dry Sump Oil Pumps • No. 23692 engineered for plumbing a remote oil cooler for wet sump oiling systems • Both will fit Small Block Chevy engines without modifications & Big Block Mark IV Chevy engines with minor block modifications • Eliminates need for a remote oil filter and associated plumbing hardware. Standard spin-on filter attaches to bottom • Lowers oil filter by 1-1/2" • Equipped with 1/2" NPT inlet and outlet ports • Includes full instructions, mounting bolts and o-rings
DESCRIPTION Oil Filter Adapter, 4.6/5.4L Ford
OIL COOLER/FILTER SANDWICH ADAPTER • Mounts between spin-on oil filter and filter pad on engine block • Billet Aluminum with a black anodized finish • Provisions for -10AN in and out lines to plumb remotely mounted oil accessories such as oil cooler or accumulator PART # 23693 23694 23695 23698 23699
DESCRIPTION Universal Oil Cooler/Filter Adapter, 3/4"-16 thread and 2-5/8" O-ring Fits: Ford, Chrysler and 4 and 6 cyl. applications Universal Oil Cooler/Filter Adapter, 13/16"-16 thread and 2-5/8" O-ring Fits: Chevy, LS1 through 2006 Small Block Universal Oil Cooler/Filter Adapter, 18mm-1.5 thread and 2-5/8" O-ring Fits: Chevy, LT1 and G.M. 4 and 6 cyl. applications Universal Oil Cooler/Filter Adapter, 20mm-1.5 thread and 2-5/8" O-ring Fits: Honda and other 4 and 6 cyl. applications Universal Oil Cooler/Filter Adapter, 22mm-1.5 thread and 2-5/8" O-ring Fits: New Ford applications
No. 23693
PART # 22605 22606
RECOMMENDED OPTIONS Oil Pump Fitting, -10AN to -10AN Oil Pump Fitting, -10AN to -12AN
Tech Support: 203.458.0542 • 203.458.0546
151