pp114-136_OilPumps_2012 10/10/11 4:11 PM Page 136
PRODUCT DRIVE BELTS HEADER
RADIUS TOOTH BELTS Fits: Radius Tooth Pulleys with 8mm Pitch
• Provides higher power and torque transmission, improved No. 97115 meshing to reduce tooth jump, greater resistance to tooth shear and reduced friction to extend belt life • Fiberglass cord is wound across the entire width of the belt to minimize stretching • Belt body is manufactured from a synthetic neoprene compound that resists heat, oils, ozone and aging • Tough nylon fabric is bonded to the tooth surface for greater wear resistance PART # 97105 97115 97125 97135 97136 97138
DESCRIPTION Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt
LENGTH x WIDTH (MM) 21"x 1" (533 x 25.4) 22" x 1" (559 x 25.4) 23.6" x 1" (599 x 25.4) 25.2" x 1" (641 x 25.4) 25.8" x 1" (655 x 25.4) 26.8" x 1" (681 x 25.4)
TEETH 67 70 75 80 82 85
No. 97110
GILMER DRIVE BELTS • For Moroso Dry Sump Pump setups • Will also work with other manufacturers’ 3/8" pitch Gilmer Drive setups PART # 97110 97120 97130 97140
DESCRIPTION Gilmer Drive Belt Gilmer Drive Belt Gilmer Drive Belt Gilmer Drive Belt
LENGTH x WIDTH (MM) 22.5" x 1" (572 x 25.4) 24" x 1" (610 x 25.4) 25.5" x 1" (648 x 25.4) 27" x 1" (686 x 25.4)
TEETH 60 64 68 72
RADIUS TOOTH BELTS
DRY SUMP
oil pumps
Fits: Radius Tooth Pulleys with 8mm Pitch
• Thin Series Belts for Moroso Vacuum Pump and Alternator Pulleys • Fits 1/2" wide or greater pulleys • Strong and lightweight with less belt stretch • Provides lower tension with positive engagement and no slippage PART # 97141 97142 97144 97146 97147 97149 97151 97152 97154 97156 97157 97159 97160 97161 97162 97164
DESCRIPTION Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt Radius Tooth Belt
LENGTH x WIDTH (MM) 23.3" x 1/2" (592 x 12.7) 23.9" x 1/2" (608 x 12.7) 25.2" x 1/2" (640 x 12.7) 26.5" x 1/2" (672 x 12.7) 26.8" x 1/2" (680 x 12.7) 28.3" x 1/2" (720 x 12.7) 29.9" x 1/2" (760 x 12.7) 30.6" x 1/2" (776 x 12.7) 31.5" x 1/2" (800 x 12.7) 33.1" x 1/2" (840 x 12.7) 33.7" x 1/2" (856 x 12.7)) 34.7" x 1/2" (880 x 12.7) 35.3" x 1/2" (896 x 12.7) 36.2" x 1/2" (920 x 12.7) 36.9" x 1/2" (936 x 12.7) 37.8" x 1/2" (960 x 12.7)
No. 97141
TEETH 74 78 80 83 85 90 97 99 100 105 106 110 112 113 116 120
COMBINING BELT CIRCUMFERENCE WITH PULLEY SIZES TO ACHIEVE YOUR DRIVE RATIO
136
Moroso offers a wide selection of pulley sizes to accommodate many ratio options and crankshaft to pump shaft centerline dimensions. By using the same belt circumference, you can move the pump away from the crankshaft centerline by using the smaller tooth pulleys with a given drive ratio. By using the larger tooth pulleys for the same ratio, the centerline to the crankshaft will be reduced, but in both cases they will have the same drive ratio.
Phone: 203.453.6571 Fax: 203.453.6906