148
TECHNOLOGY
ILLUSTRIS Helvar
ATIVO Zumtobel ATIVO can be used as a DALI master system to autonomously actuate luminaires. Integrated into LITECOM, it supports lighting management functions, such as daylight control and can automatically select the right lighting scene to suit a room’s use. It differentiates between people or vehicles, such as fork lift trucks, or adapting the lighting level due to the intensity of room use. Designed for energy efficient applications, its Plug&Play technology means it’s simple to assemble and install. An industry version comes with a rugged housing that meets protection class IP64. www.zumtobel.com
STICK-CU4 Nicolaudie The STICK-CU4 from Nicolaudie is a programmable DMX lighting controller designed around a touch sensitive colour wheel allowing for control of RGB and RGBW lighting in addition to brightness and colour temperature control. The controller is USB programmable from a PC or Mac using the ESA2 software. Up to 36 scenes can then be stored within the controller and directly recalled via six touch sensitive scene buttons. www.nicolaudie.com
ILLUSTRIS provides a versatile solution for applications where a seamless fit within the interior design scheme is a key requirement. The clean, fresh finish of ILLUSTRIS are complemented by a choice of different fascia graphic layouts, including a scene control panel, an RGB colour control panel with colour wheel, and a tuneable white layout, complete with colour temperature and intensity controls, and pre-set scenes. Out of box functionality and the ability to edit and store scenes from the ILLUSTRIS panel or from the app makes controlling DALI Type 8 devices simple, with minimal set-up. www.helvar.com
CONTROL
Wi-Light 2016 Chromateq This application is a digital remote control available for free on both Google Play and Apple Store. It offers more control options to users: three zones management, optimisation of the communication frames for an efficient flux of information between the different users (up to ten) and better reconnection to WiFi interfaces. Wi-Light can command the LED Player software and Chromateq’s LPSA-WIFI interface in Stand Alone. Wi-Light 2016 is compatible with firmware 1.1.3.3 or higher of LPSA-WIFI interfaces. www.chromateq.com
net4more Tridonic The net4more toolbox, consisting of LED drivers, communication modules, sensors, routers, software and apps, was featured in the luminaire Zumtobel MIREL 600 x 600 wireless – prototype. net4more provides access to data without the need for an additional gateway and is therefore a platform for developing services that go beyond light, such as indoor navigation. The benefits of the net4more concept are its open platform - based on the open standard of the IPv6 internet protocol -, flexibility and scalability. www.tridonic.com
Organic Response Feilo Sylvania Organic Response enabled luminaires were on display at the Feilo Sylvania booth at Light+Building. It uses distributed intelligence to deliver a highly responsive, flexible and energy efficient lighting control system. Requiring no low-voltage wiring or commissioning and ready-incorporated within Concord luminaires from Feilo Sylvania, installers will be able to benefit from significant savings in time, complexity and cost for their projects. The control system can reduce energy costs by up to 68% when compared with using no control system. www.feilosylvania.com