>COMBOS
DV40 112 COMBO DV40 212 COMBO triode mode. Plug into this combo and you’ll immediately hear its quality: very clean sounds even at high volumes, great crunchy rhythm tone, rich saturation, boost switch for lead playing, balanced response in all frequency ranges and impressive bass response—even from the 1x12”! The range of tonal options is incredible, and it’s easy to find your own sound quickly using EQ and the very practical CPC feature.
DV40 112 COMBO
DV40 212 COMBO
Power output (CPC) pentode: 1 ÷ 40W triode: 0.5 ÷ 15W
same specS
Preamp Tubes
1x ECC83
same specS
Power Tubes
2x EL34 1x ECC83
same specS
Channels
2
same specS
Controls
GAIN - MASTER - PRESENCE - BRIGHT SOLO BOOST - CONTINUOUS POWER CONTROL (CPC)
same specS
EQ CONTROLS
LOW - MID - HIGH (PASSIVE)
same specs
SPEAKER OUTPUTS
One 4 Ohm One 8 Ohm and one 16 Ohm
same specs
Other Features
Input 1 (Hi Z: 1 MΩ) Input 2 (Low Z: -6 dB) Bias (low/high switch) Service ATCS
same specS
SPEAKER SIZE
1x12” B&C neodymium (custom for DV Mark)
2x12” B&C neodymium (custom for DV Mark)
Speaker power handling 150W (AES standard) impedance 8 OHMS
300W (AES standard) impedance 4 OHMS
DIMENSIONS (MM)
628 (w) x 465 (h) x 272 (d)
684 (w) x 465 (h) x 272 (d)
DIMENSIONS (INCHES)
24.72” (w) x 18.31” (h) x 10.71” (d)
26.93” (w) x 18.31” (h) x 10.71” (d)
Weight
15.9 kg / 35.05 lbs
17 kg / 37.48 lbs
TECHNICAL SPECS
16
The DV 40 112 (1x12”) and 212 (2x12”) are twochannel, 40W all-tube combos, equipped with EL34 power tubes. Get great clean tone on channel 1 and rich tube saturation from channel 2. Tonal options are almost endless thanks to DV Mark’s patent pending Continuous Power Control (CPC), which allows you to change the power incrementally from the full 40W (class A/B) gradually all the way down to 1W (class A) in pentode mode; or 15W (class A/B) to 0.5W (class A) in
17