Layout System Incline Sets change elevation. Sets allow a smooth transition from one height to another. 2% Incline Sets (8 pieces) Changes elevation from 0-4" in 16' (0-10.1 cm in 4.87 m) 4% Incline Sets (4 pieces) Changes elevation from 0-4" in 8' (0-10.1 cm in 2.43 m) 1" (2.54 cm)
2" (5.08 cm)
0
/2" (1.27 cm)
1
24" (60.9 cm)
24" (60.9 cm)
24" (60.9 cm)
24" 24" (60.9 cm) (60.9 cm) 16' (4.87 m)
24" (60.9 cm)
1 /2" (3.81 cm) 1
4" (10.1 cm)
/4" (1.9 cm)
3
0
2% Starter
/2" (1.27 cm)
3% Starter
/2" (1.27 cm) Risers
1
(Package includes 8 identical 2' (60.9 cm) sections)
STEP
3" (7.62 cm)
4% Starter
/4" (1.9 cm)
3
24" (60.9 cm)
3 3/4" (9.52 cm) 4 1/2" (11.4 cm)
1" (2.54 cm) 24" (60.9 cm)
4% Starters
3% Starters
2% Starters
3
2 1/4" (5.71 cm)
24" (60.9 cm)
add versatility. Starters can be used with Risers to build smooth inclines. 1
24" (60.9 cm)
24" (60.9 cm)
12' (3.65 m)
8' (2.43 m)
Incline Starters
3 1/2" (8.89 cm) 4" (10.1 cm)
3% Incline Sets (6 pieces) Changes elevation from 0-4 1/2" in 12' (0-11.4 cm in 3.65 m)
3" (7.62 cm)
0
1 1/2" (3.81 cm) 2" (5.08 cm)
1" (2.54 cm)
3" (7.62 cm)
2 1/2" (6.35 cm)
/4" (1.9 cm) Riser
1" (2.54 cm) Riser
3
(Package includes 8 identical 2' (60.9 cm) sections)
Profile Boards add sides. Create terrain contours with the Hot Wire Foam Cutter.
(Package includes 8 identical 2' (60.9 cm) sections)
Profile Boards™
Profile Boards create the perimeter of your layout to define the contours. Their special interlocking design makes them easy to join together with the use of matching Connectors. Place end-to-end or stack and lock together, then trim with a Hot Wire Foam Cutter to create mountain profiles. Each Profile Board is 8" h x 24" l (20.3 cm x 60.9 cm)
2 Boards and 2 Connectors
STEP
4
Use Foam Sheets to create flat areas, tunnels and layout bases.
ST1419
Foam Sheets
Use Foam Sheets to create flat areas for towns. Also use for tunnels, contour with scrap foam to elevate the Foam Sheets and attach with low Temp Foam Glue or Foam Tack Glue. The 1/4" sheet can be bent into a radius. Each piece is 12" w x 24" l (30.4 cm x 60.9 cm)
STEP
5
Plaster Cloth covers newspaper wads to create a hard shell for landscaping.
1/4" (6 mm) (1 pc)
ST1422
1/2" (1.27 cm) (1 pc)
ST1423
1" (2.54 cm) (1 pc)
ST1424
2" (5.08 cm) (1 pc)
ST1425
3" (7.62 cm) (1 pc)
ST1426
4" (10.1 cm) (1 pc)
ST1427
Plaster Cloth
C1203 A simple, convenient and lightweight way to create a durable terrain shell. Wad newspaper, stack to form desired terrain areas and hold in place with masking tape. Dip Plaster Cloth in water and smooth over terrain areas. Plaster Cloth will dry to a hard shell that accepts pigments easily. 8" w x 15' l roll, 10 sq ft (20.3 cm x 4.57 m, 9.29 sq dm)
7