Signage Packet - Farrow by MNTCRE Marketing

Construction Signage

Manticore Sigage Solutions (408) 495-2131 Contact@MNTCRE.com

WE PROVIDE ADA & TACTILE

SIGNAGE SOLUTIONS Cost Effective and Quick Turnaround Signage Solutions to satisfy the growing needs of new and existing projects.

Our SERVICES

Our MISSION

TACTILE SOLUTIONS Our tactile sign solutions can be read by touch. Braille, raised print and raised symbols or pictograms.

RETAIL, OFFICE, ADA SIGNAGE We work with customers to design, decorate, and generate brand exposure inside and outside of their space.

At Manticore Signage Solutions we are a full service provider that is vertically integrated to provide every aspect of signage solutions. We handle projects from start to finish. This includes design, print, preparation, installation, and permitting.

WAYFINDING SIGNAGE We develop signage solutions to help drive enhance spaces. Either move in or updating our team will help bring your ideas to life.

Call Us

+408-495-2131

If you are looking for a signage related service that isn't listed please feel free to reach out and give us a call. We're here to find the solutions to your signage problems.

Contact@MNTCRE.com

www.MNTCRE.com

CERTIFICATE NUMBER:

INSURER F :

REVISION NUMBER:

TYPE OF INSURANCE

OCCUR

Y/N

N/A E.L. DISEASE - POLICY LIMIT

HEAVY EQUIPMENT Heavy Equipment Stay Out of Blind Crossing Spots

CAUTION

Emergency responders will not be required to wear construction PPE in the course of their emergency response.

In the event emergency responders are required to enter a construction jobsite, all work will be stopped in the areas where the responders are present or will be required to enter.

Emergency Responders:

After the jobsite becomes the responsibility of the Owner or other designated party, all persons working under contract with SC Builders will still be required to comply with all SC Builders’ policies including requirements for wearing personal protective equipment.

Until jobsites have been issued a Certificate of Substantial Completion, a Certificate of Occupancy or a Temporary Certificate of Occupancy or other legal notice which places the responsibilities of the Controlling Employer on another party, all Owner personnel, vendors and contractors are required to comply with SC Builders’ policies.

Occupancy:

All agency personnel are required to comply with SC Builders’ policies.

SC Builders will provide applicable personal protective equipment for agency personnel when necessary.

When requesting construction jobsite inspections, the caller should remind the agency of the safety requirements necessary on the jobsite.

Public agencies will be provided with applicable safety information and requirements during preconstruction activities or as part of the process of obtaining building permits.

Public Agency Employees:

In accordance with the provisions of the California Labor Code §6407, every employer and every employee are required to comply with the safety rules as applicable to the workplace under SC Builders’ control.

Any person who refuses to comply or repeatedly fails to comply will be removed from the project and the incident will be reported to their employer. Workers who have been removed from the project may return to work with approval of SC Builders’ Superintendent after attending the new worker orientation as a refresher course.

SC Builders will make efforts to explain the policy and the benefits of the policy; however, each subcontractor is required to take a proactive approach to the Safety Program throughout the course of the work and communicate the requirements to their employees.

Any person not in compliance with SC Builders’ policies will be reminded of the requirements and will be required to comply immediately. Violators may be subject to the disciplinary procedures defined in our Project Safety Program. Workers may be required to leave the work area or may be required to attend the new worker orientation again.

Compliance with SC Builders’ policies is a condition of employment with SC Builders and is a condition of entrance onto an SC Builders jobsite.

Zero Tolerance is a mindset where disregard for workplace safety and health, the safety and health of co-workers and the policies set in place by SC Builders is not acceptable and will not be tolerated.

SC Builders Project Safety Program will be made available to all subcontractors and to all affected parties upon request.

SC Builders’ Superintendent is the Designated Responsible Person on all of our jobsites and has ultimate responsibility and authority to lead and enforce all of the provisions of our Injury and Illness Prevention Program (IIPP) and our Project Safety Program as required by §6401.7(a) (1).

SC Builders is the Controlling Employer as defined in the California Labor Code §6400 (b) (3) and is responsible for all workplace conditions and work practices on our construction jobsites. SC Builders implements a Project Safety Program which defines workplace policies and SC Builders enforces a Zero Tolerance Policy in regards to compliance with the program and supplemental information.

with the load engaging means elevated shall be prohibited except when picking up a load. Elevated loads shall not be tilted forward except when the load is being deposited onto a storage rack or equivalent. When stacking or tiering, backward tilt shall be limited to that necessary to stabilize the load. (29) The load engaging device shall be placed in such a manner that the load will be securely held or supported. (30) Special precautions shall be taken in the securing and handling of loads by trucks equipped with attachments, and during the operation of these trucks after the loads have been removed. (31) When powered industrial trucks are used to open and close doors, the following provisions shall be complied with: (A) A device specifically designed for opening or closing doors shall be attached to the truck. (B) The force applied by the device to the door shall be applied parallel to the direction of travel of the door. (C) The entire door opening operation shall be in full view of the operator. (D) The truck operator and other employees shall be clear of the area where the door might fall while being opened. (32) If loads are lifted by two or more trucks working in unison, the total weight of the load shall not exceed the combined rated lifting capacity of all trucks involved.

ZERO TOLERANCE POLICY

AUTHORIZED REPRESENTATIVE

SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS.

CANCELLATION

(22) Vehicles shall not be driven in and out of highway trucks and trailers at loading docks until such trucks or trailers are securely blocked or restrained and the brakes set. (23) To prevent railroad cars from moving during loading or unloading operations, the car brakes shall be set, wheel chocks or other recognized positive stops used, and blue flags or lights displayed in accordance with applicable regulations promulgated by the Public Utilities Commission. (24) The width of one tire on the powered industrial truck shall be the minimum distance maintained from the edge by the truck while it is on any elevated dock, platform, freight car or truck. (25) Railroad tracks shall be crossed diagonally, wherever possible. Parking closer than 8 1/2 feet from the centerline of railroad tracks is prohibited. (26) Trucks shall not be loaded in excess of their rated capacity. (27) A loaded vehicle shall not be moved until the load is safe and secure. (28) Extreme care shall be taken when tilting loads. Tilting forward

ACORD 25 (2016/03)

CERTIFICATE HOLDER

OTHER

E.L. DISEASE - EA EMPLOYEE $

E.L. EACH ACCIDENT

PER STATUTE

$ $

EACH OCCURRENCE

AGGREGATE

PROPERTY DAMAGE (Per accident)

BODILY INJURY (Per accident) $

(A) The power shall be shut off and, when left on an incline, the wheels shall be blocked; or (B) The power may remain on provided the wheels are blocked, front and rear. (17) When the operator of an industrial truck is dismounted and within 25 feet (7.6 meters) of the truck which remains in the operator’s view, the load engaging means shall be fully lowered, controls placed in neutral, and the brakes set to prevent movement. EXCEPTION: Forks on fork-equipped industrial trucks may be in the raised position for loading and unloading if the forks are raised no more than 42 inches above the level where the operator/loaders are standing, and the power is shut off, controls placed in neutral and the brakes set. If on an incline, the wheels shall be blocked. (18) Vehicles shall not be run onto any elevator unless the driver is specifically authorized to do so. Before entering an elevator, the driver shall determine that the capacity of the elevator will not be exceeded. Once on an elevator, the industrial truck’s power shall be shut off and the brakes set. (19) Motorized hand trucks shall enter elevators or other confined areas with the load end forward. (20) Vehicles shall not be operated on floors, sidewalk doors, or platforms that will not safely support the loaded vehicle. (21) Prior to driving onto trucks, trailers and railroad cars, their flooring shall be checked for breaks and other structural weaknesses.

DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required)

DED RETENTION $ WORKERS COMPENSATION AND EMPLOYERS' LIABILITY ANYPROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? (Mandatory in NH) If yes, describe under DESCRIPTION OF OPERATIONS below

PRODUCTS - COMP/OP AGG

Education Unit: (916) 574-2528

OCCUR

GENERAL AGGREGATE $

PERSONAL & ADV INJURY

COMBINED SINGLE LIMIT (Ea accident) BODILY INJURY (Per person)

$ $

MED EXP (Any one person)

LIMITS

EACH OCCURRENCE DAMAGE TO RENTED PREMISES (Ea occurrence)

Voluntary Protection Program: (415) 703-5272

CLAIMS-MADE

POLICY EFF POLICY EXP (MM/DD/YYYY) (MM/DD/YYYY)

On-Site Assistance Program Area Offices: Fresno (559) 454-1295 Los Angeles (562) 944-9366 Northern California (916) 263-0704 San Bernardino (909) 383-4567 San Diego (619) 767-2060 San Fernando Valley (818) 901-5754 San Francisco Bay (510) 622-2891

EXCESS LIAB

SCHEDULED AUTOS NON-OWNED AUTOS ONLY

POLICY NUMBER

Cal/OSHA Consultation Programs Call Toll-Free: 1-800-963-9424 Internet: www.dir.ca.gov

UMBRELLA LIAB

ADDL SUBR INSD WVD

(A) When ascending or descending grades in excess of 10 percent, loaded trucks shall be driven with the load upgrade. (B) On all grades the load and load engaging means shall be tilted back if applicable, and raised only as far as necessary to clear the road surface. (C) Motorized hand and hand/ rider trucks shall be operated on all grades with the load-engaging means down-grade. (15) The forks shall always be carried as low as possible, consistent with safe operations. (16) When leaving a vehicle unattended (the operator is over 25 feet (7.6 meters) from or out of sight of the industrial truck), the brakes are set, the mast is brought to the vertical position, and forks are left in the down position, either:

OWNED AUTOS ONLY HIRED AUTOS ONLY

ANY AUTO

AUTOMOBILE LIABILITY

OTHER:

GEN'L AGGREGATE LIMIT APPLIES PER: PROPOLICY LOC JECT

CLAIMS-MADE

COMMERCIAL GENERAL LIABILITY

or mechanic, and the vehicle shall not be put in service again until it has been made safe. Attention shall be given to the proper functioning of tires, horn, lights, battery, controller, brakes, steering mechanism, cooling system, and the lift system for fork lifts (forks, chains, cable, and limit switches). (8) No truck shall be operated with a leak in the fuel system. (9) Vehicles shall not exceed the authorized or safe speed, always maintaining a safe distance from other vehicles, keeping the truck under positive control at all times and all established traffic regulations shall be observed. For trucks traveling in the same direction, a safe distance may be considered to be approximately 3 truck lengths or preferably a time lapse–3 seconds–passing the same point. (10) Trucks traveling in the same direction shall not be passed at intersections, blind spots, or dangerous locations. (11) The driver shall slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver shall be required to travel with the load trailing. (12) Operators shall look in the direction of travel and shall not move a vehicle until certain that all persons are in the clear. (13) Trucks shall not be driven up to anyone standing in front of a bench or other fixed object of such size that the person could be caught between the truck and object. (14) Grades shall be ascended or descended slowly.

INSR LTR

THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS.

COVERAGES

INSURER E :

INSURER D :

NAIC #

(s) Industrial trucks and tow tractors shall be operated in a safe manner in accordance with the following operating rules: (1) Only drivers authorized by the employer and trained in the safe operations of industrial trucks or industrial tow tractors pursuant to Section 3668 shall be permitted to operate such vehicles. (2) Stunt driving and horseplay are prohibited. (3) No riders shall be permitted on vehicles unless provided with adequate riding facilities. (4) Employees shall not ride on the forks of lift trucks. (5) Employees shall not place any part of their bodies outside the running lines of an industrial truck or between mast uprights or other parts of the truck where shear or crushing hazards exist. (6) Employees shall not be allowed to stand, pass, or work under the elevated portion of any industrial truck, loaded or empty, unless it is effectively blocked to prevent it from falling. (7) Drivers shall check the vehicle at the beginning of each shift, and if it is found to be unsafe, the matter shall be reported immediately to a foreman

INSURER C :

FAX (A/C, No):

OPERA TING RULES FOR INDU

JOBSITE HOURS

7:00 AM - 3:30 PM

REQUIRED AT ALL TIMES

SAFETY GLASSES

REPORT

INSURER(S) AFFORDING COVERAGE

General Industry Safety Order 3650 Industrial Trucks. General (Part (s)).

INSURER B :

(a) Every employer using industrial trucks or industrial tow tractors shall post and enforce a set of operating rules including the appropriate rules listed in Section 3650(s).

INSURER A :

General Industry Safety Order 3664 Operating Rules (Part (a)).

THERE IS NO

CONTACT NAME: PHONE (A/C, No, Ext): E-MAIL ADDRESS:

CAL OSHA

INSURED

Department of Industrial Relations

PRODUCER

CLASS II HI-VIS CLOTHING

DATE (MM/DD/YYYY)

APPROVED FOOTWEAR

CERTIFICATE OF LIABILITY INSURANCE

PERSONAL PROTECTIVE EQUIPMENT

S afety IN

HARD HATS

THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s).

CODE OF SAFE CONDUCT

No work will be performed on any equipment, machinery, or system without it being locked out and tagged. It is every employee’s responsibility to maintain his or her work area in a clean and orderly manner.

8. 9.

28. Other specific work-related standards are addressed in our Code of Safe Work Practices, which is available upon request.

27. Any damage to scaffolds, false work, or other supporting structures must be immediately reported to the Foreman or Superintendent.

26. No gas cutting, welding, or other source of ignition will be applied to any enclosed tank or vessel, even if there are some openings, until it has first been determined that no possibility of explosion exists, and authority for the work has been obtained from the Foreman or Superintendent.

25. No employee will work six (6’) feet or greater above the surface or be exposed to a fall hazard of six feet (6’) or greater without proper fall protection.

24. No employee will intentionally discharge or remove fire-fighting equipment for purposes other than fighting fires

23. Gambling in any form is strictly prohibited and is grounds for removal from the jobsite.

22. Fighting is strictly prohibited and is grounds for removal from the jobsite.

21. Anyone known to be under the influence of drugs or other intoxicating or controlled substances will not be allowed on the job; workers found to be “under the influence” are subject to disciplinary action as defined elsewhere in the company’s IIPP.

20. No employee will ride in the bed or on the bumper of vehicles or hang” on the exterior of forklifts or other moving equipment.

19. Employees will not remove respiratory protection when the work area requires it.

18. No employee will attempt to operate equipment or machinery or any specialty tool (e.g. powder-actuated tools) unless authorized and properly trained.

17. Safe ladder use is required. Working at heights must be arranged so that workers are able to face a ladder and use both hands while climbing or descending.

16. Do not throw materials, tools, or other objects from structures.

15. No employee will enter a confined space, such as manholes and vaults, etc., without training, proper equipment and PPE and authorization.

14. When lifting heavy objects, use proper lifting techniques (i.e., lift with the legs instead of the lower back; ask for help or use lifting devices).

13. Workers will not handle or tamper with any electrical equipment, machinery, or air or water lines that are not within the scope of their duties, unless they have received permission and instructions from a Foreman or Superintendent.

12. Each employee will report work-related injuries or illnesses immediately to a supervisor.

11. Workers will be instructed to ensure that all guards and other protective devices are in place and properly adjusted, and will report deficiencies promptly to their Foreman or Superintendent.

CODE OF SAFE CONDUCT

10. Radios and personal audio devices are not allowed in the work area at any time, including wearing of earpieces and headsets. Earpieces and headsets inhibit hearing and full attention to surrounding activities. Wearing telephone earpieces is not allowed in construction areas.

Employees will wear the minimum persona l protective equipment (hardhat, safety glasses, shirt, long pants and appropriate footwear). No employee will use damaged tools or equipment. Damaged tools must be removed from the work site.

No one will knowingly be permitted or required to work while the employee’s ability or alertness is so impaired by fatigue, illness, medication or other causes that it might unnecessarily expose the employee or others to injury.

No employee will attempt to work under conditions that appear to be unsafe.

Request instruction from a supervisor if they are uncertain as to the safe performance of assigned work

Report all unsafe acts and conditions to a supervisor.

Horseplay, scuffling and other such actions,including during lunch or other breaks, which could negatively affect the safety of workers or the integrity of the project site, are prohibited.

Work safely with equipment, materials and tools

Protect the general public and all other employees from unsafe construction activities

Communicate safe work practices to co-workers

All employees will be given frequent accident prevention instructions. Instructions will be given at least every five (5) working days in the Safety Meetings or craft Toolbox Safety Meetings. Safety Meeting attendance is required.

Work safely

It is the responsibility of each employee to:

The following is a partial list of the general rules that apply to each employee. There will be no tolerance for employees who carelessly or callously disregard these rules or the other applicable health and safety rules.

Clean and safe working conditions are absolutely essential for achieving an incident and injury-free work environment, as well as for the promotion of construction efficiency and progress.

Expectations for standards of conduct areprovided to employees and subcontractor employees through this Code of Safe Conduct.

Job Site 11”x17” Signs

Operating rules for industrial trucks contained on this poster are current through Register 2002, No. 22 California Code of Regulations (operative 6-27-2002). Other rules may also apply.

STRIAL TRUCKS

Jobsite Orientation Every Day 7:00 AM

S-503-01/03

EMERGENCY CONTACTS

Pardon Our Dust

16020 Empire Grade Road, Santa Cruz, 95060

EMERGENCY CONTACTS

Project Manager Jose Rosales / 530-840-6497 Superintendent Don LaHood / 650-280-4462

WAYFINDING SIGN SYSTEMS

17-15/16"

18.19" graphic dimension

17"

frame dimension

// VOLUME 8

2019 ISSUE 1

TABLE OF CONTENTS FLAT WAYFINDING

FLAT IN

CURVED WAYFINDING

CUD

SNAPPING SOLUTIONS

STANDING SIGN SOLUTIONS

STA

WALL SIGNS DIRECTORIES PROJECTING SIGNS SUSPENDED SIGNS TRIANGULAR SIGNS DESK FRAMES WALL SIGNS DIRECTORIES PROJECTING SIGNS SUSPENDED SIGNS TRIANGULAR SIGNS DESK FRAMES POSTER FRAMES PROJECTING SUSPENDED

PYLONS & INFO CENTERS

3 8 10 12 13 13 15 18 22 24 26 27 30 32 33 35

Introducing: FLAT SYSTEM //Modern Flat Shape //Round or Square Profile //Black or Silver //Customized Options Perfect systems for directional guidance in offices, hospitals, retails, schools to help visitors navigate through the building with ease. Sign Systems® (SS) provides affordable, modular wayfinding signage to the trade. From wall frames to selfstanding pylon directories and everything in between, Sign Systems offers the directional indoor signage your clients need. SS is proud to boast ever-increasing custom capabilities; we can build frames and signs suited to your exact specifications.

CURVED SYSTEM //Sleek Curved Shape //Black or Silver or combination thereof //Customized Options

Sign Systems frames accommodate a multitude of sign substrates, from printed paper inserts mounted with your protective lens, to laminated prints, cut vinyl, photopolymer, ADA faces, engraved plastics, metal and more. We ensure to work with you based on the material best suited for the project. Made in the USA // AFFORDABLE // FAST

INTRODUCTION

// VOLUME 8 WAYFINDING SIGN SYSTEMS

FLAT SYSTEM clear non-glare lens

suction cup

anodized silver or satin black powder coated frame graphic insert

impact-modified plastic molded end caps

\\ Aluminum frame extrusions are offered from 6” to 32” wide, at varying heights \\ Frames include round or square-shaped profile \\ Frames are available in anodized silver or powder-coated black \\ Plastic end caps are offered in gray or black \\ Frames come standard with a clear, non-glare lens \\ Tape mounting included, holes are an additional cost \\ Custom lengths available

FLAT TOP & BOTTOM Frame Size

Graphic Dims

Visible Area

WALL SIGNS

PREFIX: Add "FLAT-" to each listed code

10"

WL501

WL502

WL503

12"

14"

18"

WL504

WL505

WL506

10"

12"

14"

2.17" 2.5" 4.53"

2.5

3.67" 4"

6.03"

WL507

WL509

WL508 24"

16"

\\ Round Profile \\ Silver Finish

WL510 12"

WL511

16"

20"

30"

5.67" 6"

8.03"

WL512

WL513

WL514

WL515

18"

20"

24"

30"

7.67" 8"

10.03"

WL516

WL517

14"

WL518

17"

20"

WL519 24"

8.17" 8.5"

10.53"

LETTER

WL520

WL521

WL522 8.5"

WL523 24"

10.67" 11"

13.03"

FINISH:

WL524

Silver

24"

Black

Square

32"

11.67" 12"

Round

14.03"

PROFILE:

WL525

\\ Square Profile \\ Black Finish

WL526

WL527

// VOLUME 8 WAYFINDING SIGN SYSTEMS

FINISH: Silver Black

PROFILE: Round Square

Frame Size

Graphic Dims

PREFIX: Add "FLAT-" to each listed code

Visible Area

WP503

WP502

WP504

WP506

WP505

8.03" 6"

5.67"

WP507

WP501

3.67"

6.03" 4"

WP509

WP508

WP510

WP511

WP512

WP513

7.67"

10.03" 8"

WP514

WP516

10"

WP517

WP515

WP518

8.17"

8.5"

10.53" 8.5"

WP520

WP519

WP523

WP525

WP521

10"

11"

13"

8.5

WP522

WP524

WP526

WP527

ADA lenses available for WP501-WP531 wall frames. Minimum of ten ADA lenses required per order.

WP528

FLAT LEFT & RIGHT WALL SIGNS Frame Size

Graphic Dims

PREFIX: Add "FLAT-" to each listed code

Visible Area

13.03" 2"

11"

8.5"

10.5"

10.67"

11 WP529

11"

8.5"

14"

17"

WP531

WP530

WP534

WP533

WP532

14.03" 12"

11.67"

WP535

WP537

12"

16"

20"

WP536

WP538

WP539

WP540

17"

16.67"

20"

19.03"

WP541

WP544

24"

11"

WP542

32"

40"

8.5"

WP543

WP545

WP546

ADA lenses available for WP501-WP531 wall frames. Minimum of ten ADA lenses required per order.

WP547

// VOLUME 8 WAYFINDING SIGN SYSTEMS

LEFT & RIGHT WALL SIGNS Frame Size

Graphic Dims

Visible Area

PREFIX: Add "FLAT-" to each listed code

21.65"

20"

20" 19.29"

WP548

36"

8.5"

WP551

14"

24"

28"

WP549

WP550

WP553

WP552

WP554

25.65"

20"

24" 23.29"

WP555

11"

WP558

18"

32"

36"

40"

WP556

WP557

WP559

WP561

WP560

FINISH: Silver Black

PROFILE: Round

\\ Square Profile

\\ Round Profile

\\ Black or Silver

Square

FLAT

// VOLUME 8 WAYFINDING SIGN SYSTEMS

PORTRAIT DIRECTORIES Frame Size

Graphic Dims

Visible Area

PREFIX: Add "FLAT-" to each listed code

13"

DIRP501

3" 2"

19"

11" 10.67"

3" 2"

13.03"

DIRP503

DIRP502

17"

19.03"

23"

\\ Round Profile

17"

29"

16.67"

\\ Black Finish

DIRP504

DIRP505

DIRP506

6" 3"

x14

25.65" 6"

24"

27"

36"

48"

x10

23.29"

DIRP507

DIRP508

DIRP509

\\ Round Profile \\ Silver Finish

\\ Portrait style frame shape offered in choice of round or square-shaped \\ Frames located on the left & right sides \\ Configure the directory header to be placed as desired \\ Frame color choice of anodized silver or black \\ Dividing strips & end caps match the frame color of choice \\ Inserts can be replaced individually \\ Custom sizes available

FLAT MULTI-PANEL DIRECTORIES FINISH: Silver Black

PROFILE: Round Square

51.2"

46.21"

41.84"

6.53" 21.80"

31.80"

38.19"

28.34"

13.03"

x10

10.67"

x10

4.5"

4.17"

x10

26"

7.67"

10.03"

x12

5.67"

8.03"

38"

16.67"

11"

DIRM501 Frame Size

19.03"

17"

Graphic Dims

Visible Area

23.29"

25.65"

24"

DIRM502

DIRM503

PREFIX: Add "FLAT-" to each listed code

\\ Combine multiple frames with a top & bottom header \\ Frames located on the left & right sides below the header \\ Frame color choice of anodized silver or black \\ Dividing strips & end caps match the frame color of choice \\ Inserts can be replaced individually \\ Custom sizes available

// VOLUME 8 WAYFINDING SIGN SYSTEMS

TOP & BOTTOM PROJECTING Frame Size

Graphic Dims

Visible Area

\\ Double-sided flat projecting frames in landscape orientation

12"

\\ Frames located on top & bottom offered anodized in silver or black

3.67" 4" 6.03"

PREFIX: Add "FLAT-" to each listed code

PJL501

\\ Frames offered in choice of round or square-shaped

PJL502

\\ End caps match the frame color of choice

16"

\\ Inserts can be replaced \\ Comes with non-glare lens, fully assembled

5.67" 6" 8.03"

\\ Custom sizes available PJL503

10"

PJL505

PJL506

7.67" 8" 10.03"

8.5"

11"

8.17" 8.5" 10.53"

LETTER

PJL504

PJL507

\\ Square Profile

PJL508

\\ Silver Finish FINISH:

11"

17" Silver Black

10.67" 11" 13.03"

PROFILE: Round

PJL509

PJL510

Square

FLAT LEFT & RIGHT PROJECTING Frame Size

Graphic Dims

Visible Area

6.03"

PREFIX: Add "FLAT-" to each listed code

10.03"

3.67"

7.67"

4" 4

PJP501

PJP505

13.03" 11" 10.67"

11"

10"

6" PJP502

PJP509

PJP506

11 8.03"

10.53"

8.5"

5.67"

8.17"

8" 17"

6" PJP507

PJP503 6

LETTER

PJP510 11"

PJP504

PJP508

\\ Double-sided flat projecting frames in portrait orientation \\ Frames located on left & right sides \\ Frame color choice of anodized silver or black \\ Frames offered in choice of round or square-shaped \\ End caps match the frame color of choice \\ Inserts can be replaced individually \\ Comes with non-glare lens, fully assembled \\ Custom sizes available

\\ Square Profile \\ Black Finish

// VOLUME 8 WAYFINDING SIGN SYSTEMS

TOP & BOTTOM SUSPENDED Frame Size

Graphic Dims

Visible Area

PREFIX: Add "FLAT-" to each listed code

20"

28"

SUSP501

22"

SUSP504

SUSP503

26"

34"

SUSP505

SUSP506

20"

30"

38"

SUSP507

SUSP508

SUSP509

11"

25"

40"

SUSP510

SUSP511

SUSP512

7.67" 8"

8.17" 8.5" 10.53"

LETTER

10.03"

SUSP502

5.67" 6"

8.03"

6 6 150

32"

3.7" 4" 6.03"

17" 10.67" 11" 13.03

24"

SUSP513

SUSP514 36"

24"

16.67" 17" 19.03"

48"

SUSP515

SUSP516

SUSP517

\\ Double-sided flat projecting frames in landscape orientation

FINISH:

\\ Frames located on top & bottom offered in anodized silver or black

Silver

\\ Frames offered in choice of round or square-shaped Black

\\ End caps match the frame color of choice \\ Inserts can be replaced individually

PROFILE:

\\ Comes with non-glare lens, fully assembled

Round

\\ Custom sizes available \\ Round Profile \\Silver Finish

Square

FLAT TRIANGULAR PROJECTING Frame Size

Graphic Dims

Visible Area

\\ Triangular frame shape offered in choice of round or square-shaped \\ Frames located on the left & right sides

7.58"

17"

11"

\\ Configure the directory header to be placed as desired \\ Frame color choice of anodized silver or black

8.17 " 8.5 10.5 3

\\ Inserts can be replaced individually \\ Custom sizes available

PJT501

PJT502

PJT503

PREFIX: Add "FLAT--" to each listed code

DESK FRAMES DESK \\ High quality standing desk frames with frames on left & right sides \\ Frame color choice of anodized silver or black \\ Frame shape offered in choice of round or square-shaped \\ Clear, non-glare lens and suction cup included \\ Custom sizes available Frame Size

Graphic Dims

Visible Area

PREFIX: Add "FLAT--" to each listed code

10.53" 8.5" 8.17"

8.03" 6"

10.03"

5.67"

12.03"

DK501

10" 9.67"

11"

8" 7.67"

DK502

DK503

DK504

// VOLUME 8 WAYFINDING SIGN SYSTEMS

CURVED SYSTEM clear non-glare lens

suction cup

anodized silver or satin black powder coated frame

graphic insert

impact-modified plastic molded end caps

\\ Aluminum frame extrusions are offered from 4” to 48” wide, at varying heights \\ Frames are available in anodized silver or powder coated black \\ Plastic end caps are offered in gray or black \\ Frames come standard with a clear, non-glare lens \\ Tape mounting included, holes are an additional cost \\ Custom lengths available

CURVED TOP-TO-BOTTOM frame dimension

graphic dimension

WALL SIGNS

WL7

WL8

10"

12"

14"

16"

18"

20"

22"

WP4

WP5

WP6

WL9

WL10

WL11

WL12

WL13

WL14

WL15

10"

12"

14"

16"

20"

24"

WL16

WL17

WL18

WL19

WL20

WL21

12"

14"

16"

20"

24"

26"

WL22

WL23

WL24

WL25

WL26

WL27

12"

16"

18"

20"

24"

28"

WL28

WL29

11"

14"

WP37

17"

WL40 12"

WL42 18"

20"

100

120

150

200

LETTER

WL33 24"

WL37 20"

WL41 14"

WL32 20"

WL36

14"

WP41

WL31 17"

WL35

8.5"

10"

WL30

11-1/16"

WL6

8-17/32"

WL5

7-3/4"

WL4

5-3/4"

WL3

4-17/32"

WL2

3-3/4"

WL1

2-1/8"

18"

11.19"

16"

8.64"

14"

7.87"

12"

5.90"

10"

4.72"

3.93"

2.36"

WL38

22"

28"

WL43

WL44

28"

32" 12.19"

WL46

WL47

WL48

WL49 17"

WL51

24"

36"

WP70 36"

partition pins used to secure frame to fabric wall WL53

17"

18"

18.19"

WL67

17-15/16"

WL52

36" 17.19"

blue insert slides left & right

WL50

WP79

WP82 48"

WP86

24"

24.0625"

WP85

All length measurements apply to the extrusion only and exclude the end caps.

12-1/16"

WL45

WP87

// VOLUME 8 WAYFINDING SIGN SYSTEMS

LEFT-TO-RIGHT WALL SIGNS \\ High quality, left-to-right curved frames \\ Frames are available in anodized silver or powder coated black \\ Frames come standard with a clear, non-glare lens \\ Tape mounting included, holes are an additional cost

comes fully assembled

\\ Frames are ADA-compatible \\ Custom lengths available

graphic dimension frame dimension

100

4-17/32"

120

150

200

8-17/32" LETTER

All length measurements apply to the extrusion only and exclude the end caps.

ADA lenses available for select wall frames only. Minimum of ten ADA lenses required per order.

10"

CURVED

24"

22"

20"

18"

16"

14"

12"

12.19"

32"

WP50

WP49

12-1/16"

WP48

WP51

WP53

WP54

WP55

WP56

WP57

WP58

24"

12"

17"

WP52

WP62

20"

17.19"

WP67

14"

11"

17"

22" WP66

WP64

WP61

32"

WP60

28"

WP63

WP68

40"

WP65 36"

WP59

WP69

WP70

WP71

18.19"

12"

17-15/16"

WP72

14"

WP75

18 36"

32"

10"

18"

20"

24"

WP73

28"

8.5"

WP76

WP77

WP78

WP80

WP79

WP82

WP81

48"

WP74

36"

24"

12"

24.06"

WP83

WP84

WP85

WP86

All length measurements apply to the extrusion only and exclude the end caps.

ADA lenses available for select wall frames only. Minimum of ten ADA lenses required per order.

WP87

// VOLUME 8 WAYFINDING SIGN SYSTEMS

DIRP SERIES

graphic dimension

DIRP6

2" 4"

DIRP5

x10

11.19"

DIRP14

x10

43.25"

17" 17.19"

3" 6"

x10

24 24" 24.0625"

graphic is easily inserted before clear, non-glare lens All length measurements apply to the extrusion only and exclude the end caps.

\\ Dividing strips adhere to the frame and can be placed anywhere desired \\ End caps located on top & bottom \\ Inserts can be replaced individually \\ Custom frame combinations & lengths available

57.25"

38.13"

28.5625" 3" 6"

DIRP17 3" 6"

DIRP16

DIRP15

x12

3" 5"

DIRP13

36.88"

DIRP12 3" 5"

DIRP11

30.5"

20.94" 3" 5"

DIRP10 24.13" 3" 5"

DIRP9 17.75" 3" 5"

14.56" 3" 5"

DIRP8

DIRP7

30.25"

11-1/16"

DIRP4

2" 4"

25.88"

DIRP3

2" 4"

21.5"

DIRP2

13.94" 2" 3"

17.12" 2" 4"

DIRP1

frame dimension

11.75" 2" 3"

2" 3"

9.56"

DIRECTORIES

x16

x12

CURVED DIRM SERIES DIRECTORIES \\ Combine multiple vertical frames with a top-to-bottom curve header \\ Vertical frames come with black dividing strips \\ Inserts can be replaced individually \\ Choice of black or gray end caps \\ Custom frame combinations & lengths available

graphic: 33-5/16"

9 3"4- /16"

2" 11-1/16"

11-1/16"

22.38"

33.57"

DIRM3

DIRM5 graphic: 47-3/4"

7-3/4"

3/4"

DIRM4 graphic: 50-7/16"

4" 5-

3/4"

graphic:33-9/16"

x12

x10

24"

24.0625"

48.4"

x12

48.4"

x12

38.13"

27.65"

DIRM2

27.65"

9 3"4- /16"

DIRM1 graphic: 22-1/8"

17"

34.38"

51.57"

All length measurements apply to the extrusion only and exclude the end caps.

the non-glare lens is easily taken off with the suction cup for individual graphic replacement

// VOLUME 8 WAYFINDING SIGN SYSTEMS

DIRL SERIES DIRECTORIES \\ Consists of multiple top-to-bottom curved frames combined \\ End caps on left & right sides

frame dimension

\\ Comes as separate frames to mount to the wall individually

graphic dimension

\\ Choice of black or gray end caps \\ Custom frame combinations & lengths available 100

4-17/32"

DIRL5

8-17/ 32"

DIRL4

4-17/32"

40"

7- 3/4"

36"

2- 1/8"

30"

3- 3/4"

DIRL3

4.72"

DIRL2

8.64"

DIRL1

4.72"

24"

7.87

18"

2.36"

12"

3.93"

60 60 60 60

200 120 120 120 120

LETTER

DIRL6

30"

36"

DIRL7

DIRL8

40"

120 120 120 120

DIRL9 All length measurements apply to the extrusion only and exclude the end caps.

each frame allows for unique insert, available in custom widths up to 8’

the non-glare lens is easily taken off with the suction cup for individual graphic replacement

CURVED CASE STUDY IN-SITUATION

“

This project was a great success. There is a sign type for every room and wayfinding location, and it was easy to customize and incorporate the signage into the entire design concept of the facility.

”

photos courtesy of Fastsigns Lewiston

Tri-State Memorial Hospital

Signage Challenge Tri-State Memorial Hospital was in need of a variable and consistent wayfinding and room identification system throughout the facility. The sign solution needed to offer a variety of functions, while remaining easy-to-read to assist doctors, patients and visitors in navigating the facility to different wings and specialty clinics.

photos courtesy of Signs Now #74

Signage Challenge North Gibson School Corporation was in need of interior wayfinding signage for their high school to guide students, staff, and visitors to the right rooms and destinations.

“

The outcome is effective and aesthetically pleasing to everyone who visits. The signage blends well. It directly guides visitors, students and staff to their intended destinations.

”

// VOLUME 8 WAYFINDING SIGN SYSTEMS

PJL PROJECTING \\ Double-sided, comes in landscape or portrait positions \\ End caps on left & right sides \\ Anodized silver or powder coated black frames \\ Choice of black or gray end caps \\ Comes with clear non-glare lens

200

LETTER

8-17/ 32"

7-3/4"

5.5"

12"

PJL1

PJL2

PJL3

PJL31

3.93"

6.5"

6.75"

16"

PJL4

PJL5

PJL6

PJL61

5.90"

150

4.75"

10"

PJL7

PJL8

PJL9

7.87"

5-3/4"

100

graphic dimension

8.5"

10"

11"

PJL10

PJL11

PJL12

8.64"

3-3/4"

\\ Custom lengths available

PJL13 All length measurements apply to the extrusion only and exclude the end caps.

14"

17"

PJL14

PJL15

11.19"

11-1/16"

11"

frame dimension

CURVED PJP PROJECTING \\ Flat, double-sided, projecting signs \\ Idea for cut vinyl applications \\ Sliver finish with black plastic end caps \\ Comes fully assembled \\ Custom lengths available

PJF PROJECTING

graphic dimension frame dimension

5" 4"

3-3/4"

7-3/4"

11-1/16"

3.93"

7.87"

11.19"

PJF1

11"

4.75" PJP1

7.5"

100

200

PJP5

4" PJP9 PJF2

10"

5.5"

10" 4"

PJP2

PJF3

PJP6 14"

12"

8-17/ 32"

5-3/4" 4"

5.90"

8.64"

PJP10

PJF4

14"

PJP3 4"

150

PJP7

LETTER

PJF5 17"

11"

16" 6.75"

PJF6

PJP4

PJP8

PJP11

All length measurements apply to the extrusion only and exclude the end caps.

// VOLUME 8 WAYFINDING SIGN SYSTEMS

TOP-TO-BOTTOM SUSPENDED \\ Suspended signs combine back-to-back extrusions \\ Ideal for cut vinyl applications \\ Choice of black or gray end caps \\ Comes with clear non-glare lens, fully assembled

frame dimension

2.36" 3.93"

SUSP4

14"

16"

20"

24"

SUSP5

SUSP6

SUSP7

SUSP8

21"

24"

28"

32"

SUSP9

SUSP10

SUSP11

SUSP12

22"

26"

30"

34"

SUSP13

SUSP14

SUSP15

SUSP16

23"

28"

33"

38"

5.9"

4.72"

SUSP3

SUSP18

SUSP19

SUSP20

20"

26"

32"

38"

7.87"

SUSP17

SUSP21

SUSP22

SUSP23

SUSP24

11"

20"

25"

40"

8.64"

3- 3/4" 4- 17/32" 5- 3/4"

SUSP2

SUSP241

SUSP242

SUSP243

SUSP244

14"

17"

24"

36"

11.19"

LETTER

SUSP1

SUSP245

SUSP246

SUSP247

SUSP248

SUSP249

17"

24"

28"

36"

48"

17.19"

200

7- 3/4"

150

8-17/ 32"

120

11-1/16"

100

17"

2- 1/8"

\\ Custom lengths available

All length measurements apply to the extrusion only and exclude the end caps.

graphic dimension

CURVED TOP-TO-BOTTOM PROJECTING SUSPENDED 60

16"

24"

SUSP31

SUSP32

SUSP27 /16"" 2- 13/8

SUSP26

2.36"

SUSP25

24"

60 60

SUSP33

34"

SUSP35

SUSP36

4/16/32 " " 4-917

4.72"

30"

120 120

26" SUSP34

5-3/4"

5.90"

150

38"

28"

150

34" SUSP40

SUSP41

SUSP42 1//2"32" 88-17

8.64"

LETTER LETTER

11"

26"

SUSP46

SUSP47

40" SUSP48

4.72"

25"

8-117/2/"32" 4/16/32 " " 4-917

8.64"

20"

LETTER

120 120

30"

All length measurements apply to the extrusion only and exclude the end caps.

LEFT-TO-RIGHT PROJECTING SUSPENDED \\ Available with a left-to-right curve orientation in both 24” and 17” widths \\ Combined with the height of your choice \\ Silver or black curved aluminum face, choice of black or grey end caps \\ Comes complete with a clear, non-glare lens 17” left-to-right curve

\\ Comes fully assembled

graphic dimension

24” left-to-right curve

frame dimension

// VOLUME 8 WAYFINDING SIGN SYSTEMS

PJT TRIANGULAR 6- 5/16"

\\ Triangular frames offered in two silver or black aluminum curved faces

7/ 3

8-1

\\ Black powder-coated steel end caps \\ Mounting plates come standard with keyholes and round holes \\ Available in eight standard heights \\ Custom lengths available

60"

48"

36"

PJT2

24"

16"

11"

8-17/ 32"

6" PJT1

PJT3

PJT4

PJT5

PJT6

PJT7

PJT8

TR TRIANGULAR \\ The triangular aluminum extruded body with impact-modified molded plastic end caps \\ Allows for wall or ceiling mount \\ Visible from two directions \\ Custom lengths available

20"

TR3

All length measurements apply to the extrusion only and exclude the end caps.

TR4

16"

TR2

14"

TR1

10"

7.5"

3.42”

12"

3.54"

TR5

TR6

TR7

CURVED DKP SERIES PROJECTING DESK The DKP series of standing desk frames consists of high quality, powder-coated black anodized silver extruded aluminum body with a black plastic top cap and black steel foot plate. Its clear, non-glare lens and suction cup come standard. Custom lengths available.

7/ 3

8-1

8. 5"

4"h

6"h DKP1

8.5"h DKP2

DK11

DKP5

DK SERIES

10"

PROJECTING DESK

DK12 8"

3.93"

100

DK1

DK2

DK3

10"

4.72"

4-17/32"

3- 3/4"

14"h DKP4

DK10

120

DK4

DK5

8-1/2"

DK6 14"

11"

8.64"

8-17/ 32"

DKP3

2.36"

2- 1/8"

11"h

LETTER

DK7

DK8

DK9

The DK series of standing desk frames offers impact-modified plastic molded end caps that double as feet for desk or table top use and a high quality, extruded aluminum body with anodized silver or satin powder-coated black finish. Clear, non-glare lens comes standard. Custom lengths available.

All length measurements apply to the extrusion only and exclude the end caps.

// VOLUME 8 WAYFINDING SIGN SYSTEMS

ACRYLIC DESK The DKS series of standing desk frames features two clear acrylic protective plates that protect your print and brushed silver aluminum support feet for a sharp and modern look. Comes in two standard sizes.

8" 5- 3/4" 5-1/4"

" 2-1/4

DKS1 DKS2

silver aluminum feet detach from clear acrylic plates for easy graphic insertion

CONCAVE DESK These sleekly designed CONCAVE desk frames are constructed of high-quality extruded aluminum. The lens slides in and out for easy print replacements. Comes standard in anodized silver or satin powder-coated black finish in two standard sizes.

Dimensions above are graphic sizes only.

8" 3 /16

31 /

32 "

DKC1-B

DKC1-S

DKC2-B

DKC2-S

lens and graphic slide out for easy replacement

CURVED PLEXI

The DKD line of desk frames combines a stable domed, brushed silver aluminum holder with an elegant protective acrylic folded pocket providing a modern doublesided option and allows easy graphic changes. Comes in four standard sizes.

PROJECTING DESK

Dimensions above are graphic sizes only.

8- 1/2"

11"

8- 1/2"

3- 15/16"

DKD1

DKD2

DKD3

DKD4

PROJECTING DESK SIZE

PORTRAIT

LANDSCAPE

# OF SUPPORT FEET

8.5” x 11”

DKSNAP-1-P

DKSNAP-1-L

11” x 14”

DKSNAP-2-P

DKSNAP-2-L

11” x 17”

DKSNAP-11-P

DKSNAP-11-L

12” x 18”

DKSNAP-12-P

DKSNAP-12-L

14” x 22”

DKSNAP-3-L

16” x 20”

DKSNAP-4-P

DKSNAP-4-L

20” x 24”

DKSNAP-5-L

The DK Snap desk frames are available in a range of sizes and in black or silver. These front-loading desk frames snap open for quick and easy graphic changes. Includes clear non-glare protective lens.

// VOLUME 8 WAYFINDING SIGN SYSTEMS

SNAP-EDGE TRAPPA \\ Silver or black anodized finish with precision mitered corners \\ Snaps open for quick and easy graphic changes \\ No tools required \\ Aluminum extrusions mounted to a high-impact polystyrene backer \\ Comes with clear non-glare lens, mounting hardware

Dimensions below refer to size of printed graphic only.

\\ Protective sheet material: PVC

8.5" x 11" TRP2-1

11" x 14" TRP2-2

22" x 28" TRP2-7

11" x 17" TRP2-11

16" x 20" TRP2-4

12" x 18" TRP2-12

24" x 30" TRP2-8

24" x 36" TRP2-6

SNAP-EDGE TRP CUSTOM SUGGESTED POPULAR SIZES

\\ Trappa Poster Frame offers a simple, elegant snap rail solution for your custom-sized needs. \\ Combines two custom-length spring loaded snap rails with a backer \\ Comes with clear non-glare lens \\ Allows you to mount to a wall just by inserting the poster and snapping the edges shut \\ Rails, backer and lens are cut to size, depending on your graphic dimensions and desired rail length

8.5” x 11” 11” x 17” 20” x 24” 22” x 28” 24” x 36” 24” x 48” 30” x 40” 36” x 52”

18" x 24" TRP2-10

30" x 40" TRP2-9

20" x 24" TRP2-5

custom sizes available

SNAPPING SNAP-LED TRAPPA PROJECTING

frame snaps open from the front

\\ 1” thick \\ 50,000 hr bulb life \\ Evenly distributed light \\ Snap frame allows easy graphic changes

light box cord connects to wall adapter, illuminating the frame

\\ Wall mounting hardware \\ Power supply with 78” cord \\ One year warranty

CODE

SIZE

LED-SNAP-04

30"w x 40"h

LED-SNAP-05

36"w x 48"h also available as hanging signs with our suspending clips

LED diffuser panel ensures even light distribution and brightness

POSTER SNAPPER TRAPPA \\ Creates a clean, simple, elegant look \\ Hanging clips feature a top opening for clear nylon line mount as well as a recessed pocket for S-hook suspension \\ Adjustable hanging clips \\ Rails snap open and shut for quick graphic changes \\ Comes in four different standard widths: 24”, 30”, 36” and 48” \\ Custom-cut width available up to 60” hanging options:

nylon line

S-hook

snap graphic rail for easy change-out

snap rail

// VOLUME 8 WAYFINDING SIGN SYSTEMS

PJ-SNAP PROJECTING \\ Available in a wide range of sizes in black or silver \\ Double-sided projecting snap frames come with clear non-glare lenses \\ Fully assembled \\ Spring-loaded edges allows quick and easy graphic changes

8.5" x 11" PJSNAP-1-P

11" x 14" PJSNAP-2-P

24" x 36" PJSNAP-6-P

11" x 8.5" PJSNAP-1-L

20" x 16" PJSNAP-4-L

28" x 22" PJSNAP-7-L

11" x 17" PJSNAP-11-P

12" x 18" PJSNAP-12-P

22" x 28" PJSNAP-7-P

16" x 20" PJSNAP-4-P

24" x 30" PJSNAP-8-P

14" x 11" PJSNAP-2-L

18" x 24" PJSNAP-10P

20" x 24" PJSNAP-5-P

30" x 40" PJSNAP-9-P

17" x 11" PJSNAP-11-L

18" x 24" PJSNAP-10-L

24" x 20" PJSNAP-5-L

30" x 24" PJSNAP-8-L

18" x 12" PJSNAP-12-L

36" x 24" PJSNAP-6-L

40" x 30" PJSNAP-9-L

SNAPPING SUSP-SNAP SUSPENDED PROJECTING \\ Available in a wide range of sizes in black or silver \\ Double-sided projecting snap frames come with clear non-glare lenses \\ Fully assembled

8.5" x 11" SUSPSNAP-1-P

11" x 14" SUSPSNAP-2-P

24" x 36" SUSPSNAP-6-P

11" x 8.5" SUSPSNAP-1-L

20" x 16" SUSPSNAP-4-L

28" x 22" SUSPSNAP-7-L

11" x 17" SUSPSNAP-11-P

12" x 18" SUSPSNAP-12-P

22" x 28" SUSPSNAP-7-P

16" x 20" SUSPSNAP-4-P

24" x 30" SUSPSNAP-8-P

14" x 11" SUSPSNAP-2-L

17" x 11" SUSPSNAP-11-L

18" x 24" SUSPSNAP-10-L

24" x 20" SUSPSNAP-5-L

30" x 24" SUSPSNAP-8-L

18" x 24" SUSPSNAP-10-P

20" x 24" SUSPSNAP-5-P

30" x 40" SUSPSNAP-9-P

18" x 12" SUSPSNAP-12-L

36" x 24" SUSPSNAP-6-L

40" x 30" SUSPSNAP-9-L

// VOLUME 8 WAYFINDING SIGN SYSTEMS

CASE STUDY WAYFINDING

Wayfinding Signage Case Study Laurel Toyota

“

The results were fantastic! The professional staff of graphic designers and installers did a perfect job in all aspects of the project.

Signage Challenge

”

photos courtesy of Minahan Signs

Laurel Toyota was in need of directional and wayfinding signage to help clients feel welcome and comfortable navigating through the facility. Toyota was looking for an affordable solution, provided by a local contact they could constantly be in touch with.

Wayfinding Sign Solutions: Ideal for Churches, Hospitals and Schools Wayfinding sign solutions are ideal to help visitors and staff of churches, hospitals, schools and more find their way and easily navigate the facility.

STANDING DISPLAYS

DISPLAYS

PYLONS

INFO CENTERS PROJECTING

variable frame size options add versatility 8-1/2"

8-1/2"

22"

8-1/2"

16-15/16"

11-1/16"

36"

47"

36"

70"

71.417"

70"

71.417"

70"

71.417"

71.417" 70"

70"

71.417"

70"

71.417"

69" 60"

58"

11"

8-1/2"

69" 60"

16-15/16"

11-1/16"

8-1/2"

PYL-DBL-1

PYL-DBL-2

PYL-DBL-3

PYL-TR-1

PYL-TR-2

IC-TR-1

PYL-TR-3

IC-TR-2

IC-DBL-1

top view

IC-DBL-2

top view

PYL-DBL Series

PYL-TR Series

IC-TR Series

IC-DBL Series

\\ Double-sided standing pylon display

\\ Triangular shaped standing pylon display

\\ Triangular shape

\\ Silver or black curved high quality aluminum extrusions

\\ Choice of silver or black frames/extrusions

\\ Black laminate bottom plate with steel support plates

PYL-DBL

\\ Includes clear non-glare protective lenses \\ Requires assembly

PYL-TR

\\ Black powder coated steel top plate for PYL-TR1 & 2/Thermoformed plateon PYL-TR3 \\ Includes clear non-glare protective lenses \\ Requires assembly

IC-TR

\\ Silver or black curved high quality aluminum extrusions \\ Silver aluminum post, silver steel domed foot plate \\ Black powder-coated steel top and bottom plate \\ Clear non-glare protective lenses can be removed for a quick graphic change

IC-DBL

\\ Silver aluminum post, silver steel domed foot plate \\ Black powder-coated steel bottom plate, black molded plastic top plate \\ Clear non-glare protective lenses can be removed for a quick graphic change \\ Double sided

\\ Custom heights available

\\ Requires assembly