Catalogo_Disano_Postes

Page 1

432

Poles


433

POLES

Poles


Fibreglass poles Fibreglass poles: table of general features h pole diam. Ø Ø 60 Ø 60 Ø 60 Ø 60 Ø 60 Ø 60 Ø 60

recommended recomended on base sinking h. mn

1000 1500 2000 2500 3000 3500 4000

250 300 350 400 450

3600 4600 5600

Ø 60/120 Ø 60/137 Ø 60/154

400 500 600

1300 2500 3500 3900

250 350 450 500

300

350

1500

2000

2200

2650

acc. 50 acc. 50 acc. 50

Fibreglass poles have a round or cone-shaped cross-section (dimensions depend on mechanical requirements). Compared with aluminium or steel poles they offer the following advantages: - lighter weight - less maintenance - surfaces are not attacked by corrosive agents - electrically insulated - less dangerous when impact occurs - extremely flexible in the wind. Certificated poles: These poles are recommended for small-size luminaires (decorative factor), in private areas, (anti-vandalism factor). They can be installed both on a base or buried according to measurements.

acc 5 pole ø 60 a. a. a. a. a.

800 1250 1750 2200 2650

h h h h h

u. u. u. u. u.

200 250 250 300 350

w/o w/o w/o w/o w/o

window window window window window

acc. 50

ø60

991903 991904 991905 991906 991907

Cone-shaped fibreglass pole, black, corrosion resistant, mechanical high-resistance and UV stabilized.

black 115

h h h h h

1000

434

190

base for acc 5 991216

In f.g. nylon; supplied with burying anchor. For use with poles max 1900 high. Connection Ø 60.


Fibreglass cone-shaped poles

435

583/683/783 194

A

B

ø 60 ø 60

300

C

ø50

acc 1284 cone-shaped pole with window ø 60-120 ø 60-137 ø 60-154

h a. 3200 h a. 4100 h a. 5000

h u. 400 h u. 500 h u. 600

window (50x194) window (50x194) window (50x194)

428610 428611 428612

POLES

Cone-shaped pole in f.g., black, corrosion-proof, high mechanical resistance and UV-stabilised. Complete with inspection window, fuse and terminal block cover.

A

B

ø 60 ø 60

300

C

ø50

acc 1278 cone-shaped pole without window ø 60-120 ø 60-137 ø 60-154

h a. 3200 h a. 4100 h a. 5000

h u. 400 h u. 500 h u. 600

w/o window w/o window w/o window

428617 428618 428619

Cone-shaped pole in f.g., black, corrosion-proof, high mechanical resistance and UV-stabilised.


Scored pole ø 100

436

NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNRUNI standard 10032-67, according to load assumptions in UNI UNI 40/6 standard. An accurate and suitable protection or insulation of the surfaces involved is recommended to avoid any direct contact with the new masonry or concrete screed.

acc. 299

log bolt 991396 Log bolts are to be always bought with the pole 1408.

400

75

Fluted pole made of extruded aluminium, anodised by 15/20µ thick tin salt electrocoating; black, graphite or natural oxidised colour. With die-cast inspection window (191x55 mm), protective fuse holder, 10A fuse, 4-pole/3-way removable terminal block = 6 sqmm, 4 sqmm connection. With hole for insertion of power supply cable. Die-cast aluminium adapter, Ø60 mm. The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II. When using Insulation Class I fixtures, appropriate grounding connections should be included in the system.

62

acc. 1373 curved arm black 426905 s. silver 426920 Tropicalised steel. Attach to accessories 1364/1365 and pole acc. 1408/1409.

1030

444

1000/1500

ø 30

444

upward arm

1000 black

426901

1500 black

426902

1000 sil. 1500 sil.

426906 426907

ø30

To be attached to acc. 1364/5

ø 60

ø 211

acc. 327

85

s. silver graphite ø 60 200

arm 426942 426943

acc. 328 s. silver graphite ø 60 445

arm 426944 426945

Die-cast aluminium. To be used with acc. 302 for wall mounting, or acc. 300/211 for pole.

ox. black ox. nat. graphite

cover for poles 426995 426998 426997

Made of aluminium. To be used when a particular aesthetic finish is desired.

ø 60

s. silver graphite

Sector arm 426950 426951

Made of aluminium. To be used with acc. 211 for pole mounting.

700

acc. 217 connector adapter

ø 121

s. silver graphite

ø 100

s. silver graphite ø 60

426962 426963

Use with acc. 211 for installation on ø100 poles.

acc. 300

ø 180

Die-cast aluminium. To be used with acc. 302 for wall mounting or 300/211 for the pole.

85

Made of aluminium. To be used with acc. 210 for pole mounting ø100 use acc. 217.

acc. 210

acc. 1364 Corona black 426981 s. silver 426988 Made of die-cast aluminium. Equipped with terminal block acc. 1365 Corona flange black 426982 s. silver 426989 Made of die-cast aluminium. With 6 arm-stop devices to reinforce the assembly.

40

£ä

230

ø 170

Sector connection 426952 426953

acc. 367 nä

188

1600/2100

211

ø 30

s. silver graphite ø 120

acc. 1363 downward arm 1600 black 426911 2210 black 426912 1600 sil. 426916 2100 sil. 426917 To be attached to acc. 1364/5 and to pole 1408/9.

444

acc. 211

ø 214

190

acc. 1362

Oliva connection 426970 426971

In aluminium. For installation on ø60 pole of the arms acc. 210.

acc. 301

652

s. silver graphite ø 72

arm Oliva 426972 426973

Made of aluminium. To be used with acc.300/303/304/309 and 304 for pole or with acc 302/303/304/309 wall mounting..


Scored pole ø 100

437

L’ENERGIA CHE TI ASCOLTA.

ø60

Inspection window with easily removable terminal block for quick connection.

ø100

The dimension of the plinth depends on the type of post, the composition, the ground and material.

cement > Ì>Ê`

Vi i Ì

xääÉÈääÉnää

3100-4100-5000

ÈääÉÇääÉ ää

l , e a

s

to-

impermeable >ÌiÀ > i «iÀ i>L i material

>ÃV >ÌÕÀ> protection «À ÌiÌÌ Û> band

*> Pole

->LL > sand

V ÃÌ «>Ì>

191

/ÕL Ê«ÛV PVC Tube

3100 4100 5000 3100 4100 5000 3100 4100 5000

h h h h h h h h h

u. u. u. u. u. u. u. u. u.

500 600 800 500 600 800 500 600 800

oxy black oxy black oxy black oxy natural oxy natural oxy natural graphite graphite graphite

426340 426341 426342 426334 426335 426336 426327 426328 426329

POLES

hole Cava 60x35 60x35 r17.5 r17.5

a. a. a. a. a. a. a. a. a.

130

500-600-800

250

1100

acc 1409 scored pole Ø 100 h h h h h h h h h

L’ENERGIA CHE TI ASCOLTA.

ø60

Inspection window with easily removable terminal block for quick connection.

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.

400

191

800

3100-4100-5000

40mm

ø100

400

ø20

250

426345 426346 426347 426337 426338 426339 426324 426325 426326

800

1100

acc 1408 scored pole with base Ø 100 h a. 3100 oxy black h a. 4100 oxy black h a. 5000 oxy black h a. 3100 oxy natural h a. 4100 oxy natural h a. 5100 oxy natural h a. 3100 graphite h a. 4100 graphite h a. 5000 graphite Log bolt is to be bought separately acc. 299.

295

Cement base dimensions (subject to soil variations) for underground sinking of the 4 log bolts of acc. 1408.


Scored pole ø 120

438

NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNRUNI standard 10032-67, according to load assumptions in UNI UNI 40/6 standard. An accurate and suitable protection or insulation of the surfaces involved is recommended to avoid any direct contact with the new masonry or concrete screed.

acc. 299

log bolt 991396 Log bolts are to be always used with the pole 1508.

400

75

Fluted pole made of extruded aluminium, anodised by 15/20µ thick tin salt electrocoating; black, graphite or natural oxidised colour. With die-cast inspection window (191x55 mm), protective fuse holder, 10A fuse, 4-pole/3-way removable terminal block = 6 sqmm, 4 sqmm connection. With hole for insertion of power supply cable. Die-cast aluminium adapter, Ø60 mm. The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II. When using Insulation Class I fixtures, appropriate grounding connections should be included in the system.

62

acc. 1473 curved arm bla. 426915 s. silver 426921 Tropicalised steel. Attach to accessories1464/1465 and to poles acc. 1508/1509.

1530

680

ø60

acc. 1463 downward arm 1530 bla. 426913 2030 bla. 426914 1530 sil. 426918 2030 sil. 426919 To be attached to acc. 1464/5 and to pole 1508/9.

ø 60

acc. 1464 224

bla. s. silver graphite

ø 240

ø 60

bla. s. silver graphite

ø 300 ø 125

Corona flange 426985 426991 427001

200

1029

s. silver graphite ø 72

s. silver graphite ø 120

ø 430

s. silver graphite ø 60 445

base pole cover 991378 991380 991381

Made of die-cast aluminium.To be used as base pole cover acc. 1493/1308/1508.

acc. 210

arm 426944 426945

Die-cast aluminium. To be used with 300/211 for the pole mounting.

Made of aluminium. To be used with acc. 210 for pole mounting ø120.

s. silver bla. graphite

acc. 328

85

Sector connection 426952 426953

acc. 222

ø 121

ø 60 700

Oliva arm 426972 426973

Made of aluminium. To be used with acc.300/303/304/309 and 304 for pole or with acc 302/303/304/309 wall mounting

acc. 211

ø 214

arm 426942 426943

Die-cast aluminium. To be used with 300/211 for the pole mounting.

In aluminium. For installation on ø60 pole of the arms acc. 210.

acc. 301

652

acc. 327 s. silver graphite

Oliva connection 426970 426971

s. silver graphite ø 60

Made of die-cast aluminium. With 6 arm-stop devices to reinforce the assembly

85

ø 60

acc. 300

ø 180

Made of die-cast aluminium. For max 6 arms acc1462 or 1463. Equipped with terminal block.

acc. 1465

40

Corona 426984 426990 427000

500

190

1530/2030

680

acc. 129 curved arm bla. 991328 Tropicalised steel, black cationic electrocoating. Apply to acc.1464/1465 and to poles acc. 1508/1509.

170

1430/1930

680

ø 60

230

acc. 1462 upward arm 1430 bla. 426903 1930 bla. 426904 1430 sil. 426908 1930 sil. 426909 To be attached to acc. 1464/5 and to pole 1508/9.

ø 60

s. silver graphite

Sector arm 426950 426951

Made of aluminium. To be used with acc. 211 for pole mounting.


Scored pole ø 120

439

L’ENERGIA CHE TI ASCOLTA.

ø60 ø120

Inspection window with easily removable terminal block for quick connection.

The dimension of the plinth depends on the type of post, the composition, the ground and material.

Vi i Ì

Pole *>

353

PVC Tube /ÕL Ê«ÛV

->LL > sand V ÃÌ «>Ì>

hole Cava 60x35 60x35 r17.5 r17.5

h a. 3100 h a. 4100 h a. 5000 h a. 6000 h a. 3100 h a. 4100 h a. 5000 h a. 6000 h a. 3100 h a. 4100 h a. 5000 h a. 6000 Double fuse

h u. 500 h u. 600 h u. 800 h u. 800 h u. 500 h u. 600 h u. 800 h u. 800 h u. 500 h u. 600 h u. 800 h u. 800 and standard

oxy black 426350 oxy black 426351 oxy black 426352 oxy black 426353 oxy natural 426374 oxy natural 426375 oxy natural 426376 oxy natural 426373 graphite 426366 graphite 426367 graphite 426368 graphite 426369 knife switch available upon request.

POLES

250

1100

acc 1509 scored pole Ø 120

130

500-600-800

impermeable >ÌiÀ > i material «iÀ i>L i

cement > Ì>Ê` xääÉÈääÉnää

3100-4100-5000-6000

ÈääÉÇääÉ ää

l , e a

s

to-

protection >ÃV >ÌÕÀ> band «À ÌiÌÌ Û>

L’ENERGIA CHE TI ASCOLTA.

ø60

Inspection window with easily removable terminal block for quick connection.

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.

400

400

acc 1508 scored pole with base Ø 120

ø20

250

h a. 3100 oxy black 426355 h a. 4100 oxy black 426356 h a. 5000 oxy black 426357 h a. 3100 oxy natural 426377 h a. 4100 oxy natural 426378 h a. 5000 oxy natural 426379 h a. 3100 graphite 426362 h a. 4100 graphite 426363 h a. 5000 graphite 426364 Double fuse and standard knife switch available upon request. Log bolt is to be bought separately acc. 299.

800

1100

353

800

3100-4100-5000

40mm

ø120

295

Cement base dimensions (subject to soil variations) for underground sinking of the 4 log bolts of acc. 1508.


Scored pole “Lione” Ø 120

440

Fluted pole made of extruded aluminium, anodised by 15/20µ thick tin salt electrocoating; black, graphite or natural oxidised colour. With die-cast inspection window (191x55 mm), protective fuse holder, 10A fuse, 4-pole/3-way removable terminal block = 6 sqmm, 4 sqmm connection. With hole for insertion of power supply cable. Die-cast aluminium adapter, Ø60 mm. The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II. When using Insulation Class I fixtures, appropriate grounding connections should be included in the system.

NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNRUNI standard 10032-67, according to load assumptions in UNI UNI 40/6 standard. An accurate and suitable protection or insulation of the surfaces involved is recommended to avoid any direct contact with the new masonry or concrete screed.

acc. 299

400

75

log bolt 991396 Log bolts are to be always used with the pole 1308.

62

acc. 212

ø 190 65

s. silver graphite ø 120

Óää

©£Óä

Made of die-cast aluminium. To be used when installing the products on poles Ø120.

acc. 210 ø 60

500

Sector arm 426950 426951

167

67

Made of aluminium. To be used with acc. 211 for pole mounting.

Made of aluminium. To be used with acc. 210 for pole mounting ø120.

acc. 305

ø 65

92

s. silver graphite

end cap 426979 426980

To be used when no fixture is installed on acc 210 to improve appearance.

acc. 327 arm s. silver 426942 graphite 426943 Die-cast aluminium. To be used with acc. 302 for wall mounting, or 300/211 for pole mounting.

85

ø 60 200

85

ø 60

acc. 328 arm s. silver 426944 graphite 426945 Die-cast aluminium. To be used with acc. 302 for wall mounting, or 300/211 for pole mounting.

ø 60

680

680 1530/2030

ø 120

Sector connect. 426952 426953

ø 60

680 1530

190

s. silver graphite

ø60

ø 121

ø 430

170

acc. 211

ø 214

1430/1930

700

445

s. silver graphite

Made of aluminium. To be used with acc. 214/215 for ø120 pole mounting.

acc. 129 curved arm bla. 991328 Tropicalised steel, black cationic electrocoating. Apply to acc.1464/1465 and to poles acc. 1308/1309.

151

Ó{ä Ó{ä Óää

ø 60

Lione cube 991356 991365

1029

acc. 151 bla. s. silver

ring 426954 426955

acc. 153 arm attachment bla. 991358 s. silver 991359 Made of die-cast aluminium. To be used with acc. 151 when installing curved arms on poles. acc. 1462 upward arm 1430 bla. 426903 1930 bla. 426904 1430 sil. 426908 1930 sil. 426909 To be attached to acc. 1464/5 and to pole 1308/9. acc. 1463 downward arm 1530 bla. 426913 2030 bla. 426914 1530 sil. 426918 2030 sil. 426919 To be attached to acc. 1464/5 and to pole 1308/9. acc. 1473 curved arm bla. 426915 s. silver 426921 Tropicalised steel. Attach to acc.1464/1465 and on poles acc. 1308/1309. acc. 222 base pole cover sil.sab. 991378 bla. 991380 graphite 991381 Made of die-cast aluminium.To be used as base pole cover acc. 1493/1308/1508.


Scored pole “Lione” Ø 120

441

L’ENERGIA CHE TI ASCOLTA.

ø120

Inspection window with easily removable terminal block for quick connection

The dimension of the plinth depends on the type of post, the composition, the ground and material.

ÈääÉÇääÉ ää

5000

xääÉÈääÉnää

l , e a

s

to-

protection >ÃV >ÌÕÀ> band «À ÌiÌÌ Û>

impermeable >ÌiÀ > i material «iÀ i>L i

> Ì>Ê` cement Vi i Ì

Pole *>

->LL > sand

353

/ÕL Ê«ÛV PVC Tube

V ÃÌ «>Ì>

hole Cava 60x35 r17.5 60x35 r17.5

h u. 800 oxy black 426552 h u. 800 oxy natural 426576 h u. 800 graphite 426514 and standard knife switch available upon request.

130

POLES

800

250

1100

acc 1309 scored pole “Lione” Ø 120 h a. 5000 h a. 5000 h a. 5000 Double fuse

L’ENERGIA CHE TI ASCOLTA.

Inspection window with easily removable terminal block for quick connection

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.

400

400

acc 1308 scored pole “Lione” with base

ø20

250

h a. 5000 oxy black 426557 h a. 5000 oxy natural 426579 h a. 5000 graphite 426512 Double fuse and standard knife switch available upon request. Log bolt is to be bought separately acc. 299.

800

1100

353

800

5000

40mm

ø120

295

Cement base dimensions (subject to soil variations) for underground sinking of the 4 log bolts of acc. 1308.


Cone-shaped poles

442

Equipped with inspection window (293x94 mm), removable 4-pole terminal block, max. cross-section 16 sqmm. Supplied with 2 16A safety fuses. With hole for insertion of power supply cable; with holes at different heights according to use. The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II.

NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI standard 40/6.

acc. 300

ø 180

230

s. silver graphite ø 60

Oliva connect. 426970 426971

In aluminium. For installation on ø60 pole of the arms acc. 210/301/327/328.

acc. 301

652

s. silver graphite ø 72

Made of aluminium. To be used with acc. 300/303/304/309 for the pole installation or with acc. 302/303/304/309 for the wall.

acc. 210 ø 60

3645-4645-5645 3940 - 4940 - 5840

85

3000-4000-5000 3500-4500-5500

s. silver graphite

Sector arm 426950 426951

Made of aluminium. To be used with acc. 300 for pole mounting.

700

ø 60 445

85

ø 60 200

Oliva arm 426972 426973

acc. 328 arm s. silver 426944 graphite 426945 Die-cast aluminium. To be used with acc. 302 for wall mounting or 300/211 for the pole. acc. 327 arm s. silver 426942 graphite 426943 Die-cast aluminium. To be used with acc. 302 for wall mounting or 300/211 for the pole.


Cone-shaped poles

443

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010.

xää

nää 132

acc 1481 steel cone-shaped to be buried-with window a. a. a. a. a. a.

3000 4000 5000 3000 4000 5000

h h h h h h

u. u. u. u. u. u.

500 500 500 500 500 500

silver silver silver graphite graphite graphite

425150 425151 425152 425154 425155 425156

POLES

1000

hole Cava 100X50 100x50

h h h h h h

300

500

Concrete base dimensions (subject to soil variations).

Inspection door with easily removable terminal board for quick connection.

xää

3000-4000-5000

nää

ø 60

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010. Concrete base dimensions (subject to soil variations).

3000-4000-5000

Óxä

nää

{ää

Inspection door with easily removable terminal board for quick connection.

xää

nää

ø 60

ÓÓ8Îx

Óää

1000

132

acc 1480 steel cone-shaped with base-with window h h h h h h

a. a. a. a. a. a.

3000 4000 5000 3000 4000 5000

silver silver silver graphite graphite graphite

425050 425051 425052 425054 425055 425056


Steel poles ø 102

444

ø102, silver colour steel pole. Complete with inspection window with removable terminal strip. The version with base comes complete with a plinth, 4 tie rods to be buried, bolts, nuts and caps. Use with accessories 465/467 and with articles Agadir and Monza is recommended.

20

20 °

°

acc. 465

280 663

s. silver

pole arm 991411

The pole arm for Monza. To be used with poles art. 1492/1494.

1040

650

ø60

acc. 467

850

s. silver

pole arm 991413

The pole arm for Monza. To be used with poles art. 1492/1494.

6500

7000

2650

6500

7000

1325


Steel poles ø 102

445

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010. ø60

Inspection door with easily removable terminal board for quick connection.

Concrete base dimensions (subject to soil variations)

800

1000

6500

xää

nää

ø102

13

00

1300

acc 1492 steel pole to be buried h u. 800

silver

425061

191

h a. 6500

100

800

POLES

1100

hole 100x50 r25 Cava 100x50 r25

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010. ø60

Inspection door with easily removable terminal board for quick connection.

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.

1000

6500

400

40mm

xää

nää

ø102

13

00

1300

acc 1494 steel pole with base 425071

250 250 300

silver

191

40mm

h a. 6500

ø 20

800

base pole cover 991399

400

1000

acc. 222 s. silver

ø 102

13

00

To be used as base pole cover acc. 1492/1494.

170

1100

295 300 400

ø 430

1300

Concrete base dimensions (subject to soil variations)


Steel poles ø 120

446

Hot-dip galvanised steel poles. Equipped with inspection window (293x94 mm), removable 4-pole terminal block, max. cross-section 16 sqmm. Supplied with 2 16A safety fuses. With hole for insertion of power supply cable; with holes at different heights according to use. The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II.

NOTE: When using Insulation Class I fixtures, appropriate grounding connections should be included in the system. NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI standard 40/6.

Milan

Padova

Installation acc. 222 on the pole base.

163

galvanized

mast-top-pole connec. 426996

In galvanized steel. To be used as a mast-top-pole connection on poles acc. 1491/1493.

ø 121

ø 430

170

acc. 368

ø60

acc. 222 base pole cover s. silver 991378 bla. 991380 graphite 991381 In die-cast aluminium. To be used as a base pole cover acc. 1493.


Steel poles ø 120

447

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010.

6000-7000-8000

800

Concrete base dimensions (subject to soil variations)

1000

Inspection door with easily removable terminal board for quick connection.

xää

nää

500

ø25

ø121

13

00

1300

353

acc 1491 steel pole to be buried h u. h u. h u. end

800 800 800 cap and

galvanized 426150 galvanized 426151 galvanized 426152 holes to let the cables through.

acc 1491 painted pole with colour choice POLES

h a. 6000 h u. 800 painted h a. 7000 h u. 800 painted h a. 8000 h u. 800 painted Supplied with end cap and holes to let the cables through. The painted version is with RAL selected colour as indicated.

300

800

800

hole Cava 150x50 150x50 r25 r25

h a. 6000 h a. 7000 h a. 8000 Supplied with

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010. Inspection door with easily removable terminal board for quick connection.

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite.

400

1000

xää

13

1300

250 250 300

acc 1493 steel pole with base

acc 1493 steel pole with base h a. 6000 painted h a. 6800 painted h a. 7800 painted Supplied with end cap and holes to let the cables through. The painted version is with RAL selected colour as indicated.

ø 20

295 400

1000

h a. 6000 galvanized 426160 h a. 6800 galvanized 426161 h a. 7800 galvanized 426162 Supplied with end cap and holes to let the cables through.

40mm

353

00

400

nää

ø121

800

6000-6800-7800

40mm

500

ø25

13

00

1300

Concrete base dimensions (subject to soil variations)


Steel pole ø 120 -193

448

Hot-dip galvanised steel poles. Equipped with inspection window (293x94 mm), removable 4-pole terminal block, max. cross-section 16 sqmm. Supplied with 2 16A safety fuses. With hole for insertion of power supply cable; with holes at different heights according to use. The version with base is supplied with a base and 4 log bolts to be sunk into the ground, bolts and caps. Standard insulation class II.

NOTE: When using Insulation Class I fixtures, appropriate grounding connections should be included in the system. NOTE: The possibility to attach an assembly to the pole is subject to a wind pressure resistance assessment in the areas regulated by CNR-UNI standard 10032-67, according to load assumptions in UNI standard 40/6.

Arcugnano - Vicenza

Installation acc. 223 on the pole base.

163

galvanized

mast-top-pole connec. 426996

In galvanized steel. To be used as mast-top-pole connection on poles acc. 1505/1503.

ø 193

ø 430

170

acc. 368

ø60

acc. 223 base pole cover s. silver 991379 Die-cast aluminium. To be used as base pole cover acc. 1503.


Steel pole ø 120 -193

449

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010.

500 500

ø25 ø25

Inspection door with easily removable terminal board for quick connection.

Concrete base dimensions (subject to soil variations)

800

1000

xää

9000 9000

13

00

ø193 ø193

239 239

acc 1503 steel pole to be buried

3000 3000

h a. 9000 h u. 800 galvanized 426575 Supplied with end cap and holes to let the cables through. hole Cava 150x50 r25150x50 150x50 r25 Cava

r25

1380 1380

acc 1503 painted pole with colour choice h a. 9000 h u. 800 painted Supplied with end cap and holes to let the cables through. The painted version is with RAL selected colour as indicated.

300 300

800 800

1300

POLES

nää

ø121 ø121

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010.

500 500

ø25 ø25

Inspection door with easily removable terminal board for quick connection.

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite

1000

13

00

1300

250 300

acc 1505 steel pole with base h a. 9000 galvanized 426585 Supplied with end cap and holes to let the cables through.

40mm

ø 20

acc 1505 painted steel pole with base h a. 9000 painted Supplied with end cap and holes to let the cables through. The painted version is with RAL selected colour as indicated.

400

880 880

295 400

1000

239 239

400

40mm

xää

nää

ø193 ø193

3000 3000

9000 9000

ø121 ø121

13

00

1300

Concrete base dimensions (subject to soil variations)


Steel pole “Aliante” ø 120-193 Hot galvanised steel poles. Complete with inspection window (239x64mm), with 4-pole and 16mm2 maximum cross section removable terminal strip. With 2 16A rated protection fuses. Arranged with the power cable entry hole. The version with base comes complete with a plinth, with 4 tie rods to be buried, bolts, nuts and caps. Class II insulation as a standard feature. Attention is required when using fixtures with class I insulation since earthing connections must be foreseen. N.B.: The possibility of combining a composition to the pole is subordinated to verifying the ability to withstand the wind force in the areas foreseen by the ENV 1991-2-4 standards. In accordance with the load assumptions foreseen in the EN 40-3-1 standards. For technical information see chapter.

Pole installation example of acc. 450. Supplied with 3W triple lens LED module, white or standard bluee.

acc. 450 LED head CTL LED whi 991395 LED blue 991395-71 To be installed on pole to give an aesthetic finish.

20

200

ø90

acc. 406 Aliante arm s. silver 991387 graphite 991388 In steel. It permits the pole application acc. 1475/1476.

ø60

530

700

ø60

1500 530

450

acc. 407 Aliante arm s. silver 991389 graphite 991390 In steel. It permits the pole application acc. 1475/1476.


Steel pole “Aliante” ø 120-193

451

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010.

1000

xää

8000

nää

ø121

Concrete base dimensions (subject to soil variations)

800

Inspection door with easily removable terminal board for quick connection.

13

00

ø193

1300

239

2000

acc 1475 Aliante pole to be buried

300

800

POLES

1380

hole 150x50 r25 Cava 150x50 r25

h a. 8000 h u. 800 silver 426180 Supplied with end cap and holes to let the cables through. The painted version is with RAL selected colour as indicated. Cycle pathway versions are available on request.

ON REQUEST Possibility of supplyng poles with the following colour paint finishes: RAL 3003, 5011, 7026, 9011, 8015, 5002 7024, 7016, 9006, 7037, 6004, 8019, 6011, 7022, 1015, 9010. Inspection door with easily removable terminal board for quick connection.

8000

400

1000

40mm

xää

nää

ø121

For correct installation of pole and base, the ceiling cap should be fitted as shown in the assembly drawing featured opposite

13

00

ø193

1300

250 330 300

40mm

ø 20

400

295 400

1000

880

239

2000

acc 1476 Aliante pole with base h a. 8000 silver 426190 Supplied with end cap and holes to let the cables through. The painted version is with RAL selected colour as indicated. Cycle pathway versions are available on request.

13

00

1300

Concrete base dimensions (subject to soil variations)


Aliante composition examples

ø121

4500 4500

ø193

ø121

ø121

8180 8180

8165

ø121

8200 8200

452

ø193

ø193

ø193

ES. ac 91 - 1 Giovi Components: 1 Giovi 1 pole to be selected between acc. 1475/76* 1 arm acc. 407 991389/90 *Pole height can be specified as desired

ACC 407

1475/1476 Example of project with art.1652 SAP-T 150. Area 15x30 m; h=8 m 2000 2 7 42 32 22 17 12 37 27

ES. ac 71 - 1 Metropolis Components: 1 Metropolis 1 pole to be selected between acc. 1475/76* 1 arm acc. 407 991389/90 *Pole height can be specified as desired

ACC 407

1475/1476 Example of project with art. 1752 SAP-T 150. Area 15x30 m; h=8 m

2150

3

7 23 31 19 27 35

15 11

ES. ac 76 - 2 Metropolis Components: 2 Metropolis 1 pole to be selected between acc. 1475/76* 1 arm acc. 407 991389/90 1 arm acc. 406 991387/88

ACC 407

ACC 406

ACC 455

1475/1476 Example of project with 1752/1753 SAP-T150. Area 20x30m; h=8/4,5 4

*Pole height can be specified as desired

1350

2150

13 22

40 31

58 76 67 49

ES. ac 23 - 2 Monza Components: 2 Monza 1 pole to be selected between acc. 1475/76* 2 arms acc. 407 991389/90 1 led head acc. 450 991395 *Pole height can be specified as desired

ACC 407

ACC 450 1720

1475/1476 Example of project with 1755 - HCIT 150. Area 20x30 m; h=8 m 16 23

30 44 58 37 51 65

65

9

1720


Composition examples

453 1325

1386

ø193

6500

ø193

ø102

7000

8100 8100

4500 4500

6500

ø193

ø121

8100 8100

ø121

6500

ES. ac 15 ACC 407

ACC 455

1475/1476 Example of project with 1240 CDM-TT 150. Area 15x30 m; h=8 m

1 Torpedo Components: 1 Torpedo 1 pole to be selected between acc. 1475/76* 1 arm acc. 407 991389/90 1 attachment acc. 455 991400/01 *Pole height can be specified as desired

2116

44 68 6052 36 28 20 12

4

POLES

7000 7000

ø102

PARKING

HOTEL

ø121

ES. ac 17 - 2 ACC 407

ACC 406

1475/1476 ACC 455 Example of project with 1240/1244 CDM-TT150 JM-T70. Area 30x20 m; h=8/4,5 1316

2116

Torpedo Components: 2 Torpedo 1 pole to be selected between acc. 1475/76* 1 arm acc. 407 991389/90 1 arm acc. 406 991387/88 2 attachments acc. 455 991400/01 *Pole height can be specified as desired

52 60

52 60 28 44 68 36

20

4 12

ES. ac 26 - 2 Agadir ACC 465

2650

1492/1494 Example of project with 1584 JM-TS 150. Area 15x30m; h=5 28

28

Components: 2 Agadir 1 pole to be selected between acc. 1492/1494* 2 arms acc. 465 991411 *Pole height can be specified as desired

28

212 189 166 143 120 97 74 51

28

ES. ac 25 - 1 Monza ACC 467

1492/1494 Example of project with 1755 HCI-T 150. Area 15x30m; h=8 1386 4 10 52 34 22 46 40 28 16

Components: 1 Monza 1 pole to be selected between acc. 1492/1494* 1 arm acc. 467 991413 *Pole height can be specified as desired


5750/6750/7750

3298/4298/5198/6198

3360/4360/5260

ø120

BAR

ø120

ø121

ø121

ES. ac 74 - 1 Metropolis

*Pole height can be specified as desired

ACC 210

ACC 211

ACC 212

1491/93/97/98 ACC 213 ACC 215 Example of project with art. 1752 SAP-T 150. Area 10x7 m; h=5 m

2012

BAR

Components: 1 Metropolis 1 pole to be selected between acc. 1491/93* 1 Sector arm acc. 210 426950/51 1 Sector connect. acc. 211 426952/53 1 ring acc. 212 426954/55 1 attachment acc. 213 426956/57 1 tie-rod acc. 215 426960

ES. b 30 - 2 Metropolis Components: 2 Metropolis 1 pole to be selected between acc. 1508/1509* 1 Oliva acc. 300 426970/71 2 arms Sector acc. 210 426950/51

ACC 210

ACC 301

1508/1509 Example of project with 2 metropolis SAP-T70. Area 20x20m; h=5; I=0°

*Pole height can be specified as desired

8

8

56 72 48 64 4032

2848 24

16

8 8

ES. b82

with scored pole ø120 Components: 2 Lanterna art. 1760/61/62/63/64/65 1 pole to be selected between acc 1508 e 1509* 1 Oliva acc. 300 426970/71 2 Oliva arms acc. 301 426972/73 2 attachments acc 309 426993

ACC 300

ACC 301

ACC 309 1400

1508/1509 Example of project with art. 1762 SAP-E 100. Area 15x15 m; h=3 m 6 9

12

12

9 6

*Pole height can be specified as desired 9

9 12

9

30 27 24 21

6

18

9 15

6

ES. ac95 -

2 Capri Components: 2 Capri 1 pole to be selected between acc.1491/93* 2 Sector arm acc. 210 426950/51 1 Sector connect. acc. 211 426952/53 1 ring acc. 212 426954/55 2 attachment acc. 214 426958/59 2 tie-rods acc. 215 426960 2 pole attach. acc. 155 991362 *Pole height can be specified as desired

ACC 210

ACC 211

ACC 212

1491/1493 ACC 214 ACC 215 ACC 155 Example of project with art. 1552 JM-E 150. Area 16x8 m; h=5 m

2840

5860/6860/8760

Examples of assemblies

454


ø121

6000/7000/8000

ø120

3720/4720/5620/6620

ø121

500 600 800

5700

ø102

455

HOTEL

6150-7150-8150

Examples of assemblies

ES. ac 34 - Montecarlo ACC 300

ACC 301

Components: 2 Montecarlo art. 3171/72/73 1 pole to be selected between acc. 1492/94* 1 Oliva acc. 300 426970/71 2 Oliva arms 301 426972/73 2 threaded connec. acc. 304 426978

ACC 304

1492/1494 Example of project with art. 3171 JM-TS 150. Area 15x20m; h=5 11 23

*Pole height can be specified as desired

1860

POLES

107 95 83 71 59 47 35

ES. b 28 - 1 Monza 965

965

ACC 300

ACC 210

Components: 2 Monza 1 pole to be selected between acc. 1491/93/1503/05* 1 Oliva acc. 300 426970/71 2 Sector arms acc.210 426950/51 2 connection acc. 405 991385/86

ACC 405

149193/1503/5 Example of project with art. 1755 HCI-T150. Area 20x30m; h=8

*Pole height can be specified as desired 52 66 59 45 38 31

24

17 10

ES. b14 ACC 300

1400

ACC 301

with pole Ø120 - 2 Vista Components: 2 Vista art. (chose one from art. 1596/98/99) 1 pole to be selected between acc. 1508 e 1509* 1 Oliva acc. 301 426972/73 2 Oliva arms acc. 300 426970/71 2 attach. ø 60 acc. 303 426976/77

ACC 303

1508/1509 Example of project with art.1598 JMTS 150. Area 14x7 m; h=5000mm 11

19 27 35

43 51

59

43

27 19 35

11

*Pole height can be specified as desired

67 75 67 67 59

11

11

ES. b 28 - with steel pole ø120 - 1 Torcia ACC 211

ACC 213

ACC 301

1491/93 ACC 303 Example of project with art. 1511 HCI-T150. Area 20x20m; h=5,56

9 8 7 6 5 4

10 11

11

HOTEL

10

Components: 1 Torcia (choose three art.) 1 pole to be selected between acc 1491 e 1493* 1 attach. arm oliva acc. 301 426972/73 1 Sector connect. acc. 211 426952/53 1 banner connect. acc. 213 426956/57 1 attach. ø60 acc. 303 426976/77 *Pole height can be specified as desired


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.